Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

This is work in progress, but I'm making it available now because (a) it might fix those strange errors which a small number of users have reported, and (b) it incorporates the new agreed scaling for the QLN and HLog graphs which was recently discussed.

Full list of changes since v5.0.1:

- all text pages now have "Copy to clipboard" buttons
- all graphs now have legends and "Hide legend" checkboxes
- all graphs with "Tone number" on the X axis now have a timestamp under the graph at the left
- changed the vertical scaling of the QLN and HLog graphs to better reflect the range of
  possible values
- fixed bug whereby resyncs weren't being detected (for alerts and for the resync count)
- fixed a small cosmetic error with snapshots on Linux systems
- fixed exception which resulted when manually editing the traffic monitoring "Model" box
- added option to take auto snapshots of the traffic graphs
- made some changes which may resolve issues with "List index (0) out of bounds" and
  "Division by zero" errors seen by some users

http://www.s446074245.websitehome.co.uk/downloads.html

[Ducky]

Sweet, cheers for the update, I've been having a couple of issues with the program crashing.  Will try this version and see how it goes! 

[burakkucat]

V5.0.2 has been downloaded to The Cattery. 

Testing is now in progress . . . 

Unfortunately my testing did not take very long . . . I attach three screen-scrapes to show what I observed.

[burakkucat]

After deleting the configuration directory (~/.dslstats/) and then re-configuring the utility I now have it executing. So please ignore the third screen-scrape, above. 

[roseway]

Thanks for the information.

Concerning the other two screenshots, this is another of those manual editing issues. That box isn't supposed to be manually edited, and I confirm that if you do, an access violation results. It will be fixed (and I'll have a good look to see if there are any others ).

[burakkucat]

That box isn't supposed to be manually edited, and I confirm that if you do, an access violation results. It will be fixed (and I'll have a good look to see if there are any others ).

I deliberately tried to perform a manual edit as a result of seeing the following line in your opening post --

- fixed exception which resulted when manually editing the traffic monitoring "Model" box

 

[kitz]

Good work eric - thank you.




-------
PS
Ive not been giving feedback of late because I've been testing some vdsl routers which have lantiq chipsets so unfortunately arent compatible with dslstats.
I will continue to report when I have a BCM modem/router back on.

[roseway]

That box isn't supposed to be manually edited, and I confirm that if you do, an access violation results. It will be fixed (and I'll have a good look to see if there are any others ).

I deliberately tried to perform a manual edit as a result of seeing the following line in your opening post --

- fixed exception which resulted when manually editing the traffic monitoring "Model" box

 

I must be having a brainstorm. You raised this issue before, and I know I fixed it at the time, but somehow the fix got lost. I really will fix it next time.

[burakkucat]

Please don't worry too much over it . . . After all this is a pre-release package that we are all trying, deliberately, to break! 

[NewtronStar]

I want to congratulate eric for DSLstats has become my number one lightning detector once i see the errored seconds rising and look at uk lightning graphs it confirms there are strorms 25 miles away.

will be downloading 5.0.2 once I get the washing off the line 

[NewtronStar]

Version DSLstats 5.0.2 running well on my system HG612 modem V3 with BT HH3 type A

[roseway]

Thanks NS. Perhaps I should produce a special commercial version of it and advertise it as a lightning detector.

[krypton]

Yes, it works well for this purpose especially with my overhead cable. Long time before the storm arrives the FEC error counter begins to increase.

click to enlarge

[kitz]

Just put the Zyxel back on and I happen to notice this

Stats recorded 18 Aug 2014 18:08:38

DSLAM/MSAN type:           IFTN:0xb203 / v0xb203
Modem/router firmware:     AnnexA version - A2pv6F039i.d24e
DSL mode:                  VDSL2
Status:                    Showtime
Uptime:                    49 min 5 sec
Resyncs:                   0 (since 18 Aug 2014 18:00:11)
         
            Downstream   Upstream
Line attenuation (dB):           
Signal attenuation (dB):   Not monitored      
Connection speed (kbps):   79987      20000
SNR margin (dB):           8.1      12.7
Power (dBm):               14.3      5.7
Interleave depth:          1      1
INP:                       0      0

The box is ticked in the settings and Im getting the following errors

Code: [Select]

18 Aug 2014 18:02:38 Error processing signal attenuation
18 Aug 2014 18:03:38 Error processing signal attenuation
18 Aug 2014 18:04:38 Error processing signal attenuation
18 Aug 2014 18:05:38 Error processing signal attenuation
18 Aug 2014 18:06:38 Error processing signal attenuation
18 Aug 2014 18:07:38 Error processing signal attenuation
18 Aug 2014 18:08:38 Error processing signal attenuation
18 Aug 2014 18:09:38 Error processing signal attenuation

These are the details via telnet

Code: [Select]

Discovery Phase (Initial) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (33,857) (1218,1959) (2795,4083)
Medley Phase (Final) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (41,857) (1218,1959) (2795,4083)
                  VDSL Port Details               Upstream                Downstream
Attainable Net Data Rate:           30854 kbps              88778 kbps
Actual Aggregate Tx Power:             5.7 dBm               14.3 dBm
====================================================================================
  VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
  Line Attenuation(dB): 0.6 18.0 27.5 N/A N/A 10.8 24.0 37.8
Signal Attenuation(dB): 0.5 17.9 27.5 N/A N/A 10.6 23.9 37.8
        SNR Margin(dB): 14.4 13.0 12.6 N/A N/A 8.2 8.1 8.1
         TX Power(dBm): -6.0 -26.5 5.4 N/A N/A 11.9 7.4 7.4
 >

[roseway]

The line and signal attenuation shown in the stats summary are the overall values reported in adsl info --linediag and should show as not available or not reported on VDSL2 connections. The per-band values aren't currently shown in the summary. I need to check how this is handled in the stats summary and improve the wording.