Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 9 10 [11] 12 13 ... 22

Author Topic: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)  (Read 312571 times)

Rockall789

  • Just arrived
  • *
  • Posts: 7
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #150 on: April 12, 2015, 02:27:24 PM »



Hi, I'm also running B030SP08 unlock web gui. Psychopomp1 isn't it meant to be disabled in this version by default?
My question is, I've unlocked the hg612, and an in the UI. How do I enable internet access? I want to use the hg612 as the modern and my netgear wnr2000 router.


Sent from my iPhone using Tapatalk

the default config is bridged. Plug your router WAN port into LAN1 of the HG612, and plug LAN2 into one of the LAN ports on the router. Set up the ppp settings on the router and you're done.



Thanks for your reply. What do I need to change the PPP settings too or how do I find out?


Sent from my iPhone using Tapatalk


Your ISP will give you the ppp settings you need. IIRC I only had to enter username/password for mine.

I've screen shot all the pages from my hub 5s UI so I should have all the info? I have a username but on the hub the password isn't shown.
Sorry just to clarify i don't need to do anything to the hg612. Just the router?


Sent from my iPhone using Tapatalk
Logged

loonylion

  • Reg Member
  • ***
  • Posts: 723
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #151 on: April 12, 2015, 02:40:42 PM »



Hi, I'm also running B030SP08 unlock web gui. Psychopomp1 isn't it meant to be disabled in this version by default?
My question is, I've unlocked the hg612, and an in the UI. How do I enable internet access? I want to use the hg612 as the modern and my netgear wnr2000 router.


Sent from my iPhone using Tapatalk

the default config is bridged. Plug your router WAN port into LAN1 of the HG612, and plug LAN2 into one of the LAN ports on the router. Set up the ppp settings on the router and you're done.



Thanks for your reply. What do I need to change the PPP settings too or how do I find out?


Sent from my iPhone using Tapatalk


Your ISP will give you the ppp settings you need. IIRC I only had to enter username/password for mine.

I've screen shot all the pages from my hub 5s UI so I should have all the info? I have a username but on the hub the password isn't shown.
Sorry just to clarify i don't need to do anything to the hg612. Just the router?


Sent from my iPhone using Tapatalk

Just the router, yes. The password should be available either on your ISP customer portal (look for something along the lines of 'connection settings/information') or possibly in the paperwork you received when you ordered the connection.
Logged

Rockall789

  • Just arrived
  • *
  • Posts: 7
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #152 on: April 12, 2015, 02:42:33 PM »

I'll look for the letter I'm pretty sure I saw it on there. I'm really sorry but what is ISP customer portal?


Sent from my iPhone using Tapatalk
Logged

loonylion

  • Reg Member
  • ***
  • Posts: 723
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #153 on: April 12, 2015, 02:44:23 PM »

I'm really sorry but what is ISP customer portal?

It's the part of your ISP's website that you can log in to in order to manage your account/view your bills etc.
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #154 on: April 12, 2015, 03:19:27 PM »

Hi
I running B030SP08 (unlock-web gui), how i do disable the BT update agent (TR69?) in the web gui?
Cheers

It can not be done via the GUI.  :no:  You will need to issue the command line sequence (shown by Kitz in reply #141, above) from the CLI.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #155 on: April 12, 2015, 04:15:32 PM »

If you're on residential BT Infinity the username is bthomehub@btbroadband.com and there is no password.
Logged

Rockall789

  • Just arrived
  • *
  • Posts: 7
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #156 on: April 12, 2015, 04:25:39 PM »

Thanks guys I can't believe I got stuck here, it seems so obvious now. Just didn't notice the 'does your connect require a log in' option.


Sent from my iPhone using Tapatalk
Logged

apvm

  • Just arrived
  • *
  • Posts: 9
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #157 on: April 18, 2015, 12:47:32 PM »

Thanks from Canada, flashed the HG612 with B030SP08 webui, this latest firmware works fine with Bell's ADSL2+ 15/1 and VDSL2 50/10.  Thank you again.  Not sure if there are any improvement over the stock B028SP10 that the modem came with though.  By the way, VDSL2 remote is Alcatel-Lucent 7330 (ISAM).
« Last Edit: April 18, 2015, 12:50:37 PM by apvm »
Logged

Dray

  • Kitizen
  • ****
  • Posts: 2361
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #158 on: April 18, 2015, 01:23:09 PM »

There's a big difference here in the UK. The latest firmware supports G.INP which is being rolled-out somewhat selectively.
Logged

guy75634

  • Just arrived
  • *
  • Posts: 2
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #159 on: April 19, 2015, 09:24:10 PM »

I got a new HG612 (unlocked) to replace my ISP supplied modem. Unfortunately the HG612 does not synch. I gave the modified firmware a try (SP06), but no luck.

xdslcmd info says:

Quote
xdslcmd: ADSL driver and PHY status
Status: G.994 Training
Retrain Reason:   0
Last initialization procedure status:   3

...

xdslcmd: ADSL driver and PHY status
Status: Idle
Retrain Reason:   0
Last initialization procedure status:   3
....
xdslcmd: ADSL driver and PHY status
Status: G.994 Training
Retrain Reason:   0
Last initialization procedure status:   3

...

xdslcmd: ADSL driver and PHY status
Status: Idle
Retrain Reason:   0
Last initialization procedure status:   3
....
xdslcmd: ADSL driver and PHY status
Status: G.994 Training
Retrain Reason:   0
Last initialization procedure status:   3

...

xdslcmd: ADSL driver and PHY status
Status: Idle
Retrain Reason:   0
Last initialization procedure status:   3
....

.... and so on forever. DSL light is flashing maybe 15 times, then stops for a minute, then flashing again.

My provider does ADSL2+ and requires PTM (the reason why I bought this modem / one of the few affordable PTM models available). In don't know what DSLAM they are using (California, AT&T, formerly Pacific Bell).

Sure, I tried all possible ADSL settings on the HG612, but it does not make a difference. I also checked the wire connections (measured resistance from DSL signal transformer on HG612 board to the other end of the phone cable).

The ISP provided modem is a Smartrg 360n. DSL hardware driver is A2pG038i.d25d (obviously it has the same DSL chip as the HG612). I tried this blob on the HG612, but I get a segmentation fault .

Any hints ... I would appreciate very much. Thanks.

« Last Edit: April 19, 2015, 09:28:41 PM by guy75634 »
Logged

boost

  • Reg Member
  • ***
  • Posts: 768
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #160 on: April 19, 2015, 10:31:51 PM »

Tried the inner/outer setting?
Logged

guy75634

  • Just arrived
  • *
  • Posts: 2
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #161 on: April 19, 2015, 10:57:56 PM »

Tried the inner/outer setting?

How can I do this? GUI? shell command via telnet? I can't find such a setting in the GUI.

On the PCB only the inner pair is connected.

UPDATE:
I guess I found it. I tried

xdslcmd configure --lpair i
and
xdslcmd configure --lpair o
then
xdslcmd start --up

but no difference. Did I miss anything?

« Last Edit: April 19, 2015, 11:30:32 PM by guy75634 »
Logged

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 33881
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #162 on: April 24, 2015, 08:57:07 AM »

Quote
I gave the modified firmware a try (SP06)

Latest f/w is B030SP08.
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

apvm

  • Just arrived
  • *
  • Posts: 9
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #163 on: May 09, 2015, 12:35:22 PM »

Just curious..I own both the HG610 and HG612, on the HG610 DSL configuration page there are two options for DSL Capability on the bottom : Bitswap Enable and SRA enable but I don't see these two options on the HG612 DSL configuration page, does that mean the HG612 does not support these options and what are they for?  TIA
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: HG612 Firmwares [New H-Wolf version] (Updated 9 Aug 2014)
« Reply #164 on: May 09, 2015, 03:39:31 PM »

Bitswap Enable -- See the Bit Swapping section on the ADSL Technology and DMT page of the main site.

SRA Enable -- See the Seamless Rate Adapation section further down on the same page.

For each of your two devices (HG610 and HG612) in turn, establish a telnet session and enter the busybox shell. Now issue the following command --

xdslcmd profile --show

Do you see any reference to bitswap and sra?

Using my HG622 as an example (as I don't think it is worthwhile to get out my HG610 and HG612 for this example  ;)  ) I see --

Code: [Select]
# xdslcmd profile --show

Modulations:
G.Dmt Disabled
G.lite Disabled
T1.413 Disabled
ADSL2 Enabled
AnnexL Disabled
ADSL2+ Disabled
AnnexM Disabled
VDSL2 Disabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra On
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: Off
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)
#

Note the two lines following the Capability: heading?  :)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.
Pages: 1 ... 9 10 [11] 12 13 ... 22
 

anything