Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RobV]

Thanks

I may risk the TT app then but it wants default user pass and also ip ending 1.1 which on principle annoys me.

[Bald_Eagle1]

The config does not change on firmware update, so no ISP lock (my hg635 on plusnet ADSL was still able to connect).

Just to add that with beta testing help from kitzuser87430, I am very close to releasing an update to HG612 Modem Stats that will work with the HG635.

[RobV]

Currently spending a sunday morning messing with router trying to update it. Having begrudingly changed ip and password to default it seems the talktalk app is not for huawei routers (yeah RTFM me... ) so the only way to update according to tt appears to be to by doing factory reset and waiting.....
Other than not doing what i'm told - I assume a combination of tr068 and remote management have the device talk to tt servers to report stats which in turn push new firmware of required (quoted as 48 hour delay)

Fingers crossed this actually works although am sceptical now not being a tt customer (not to mention disliking tr069 and remote management full stop)

[kitzuser87430]

now not being a tt customer

It will be fine; mine updated whilst on plusnet.

Ian

[RobV]

Mind me asking what your setting were as I'm still stuck on 1.04 ?

Internet Connection has TR069 service ticked

Via Maintain:
Remote Management enabled as is Periodic inform
Setting (via decrypted config)
<ManagementServer EnableCWMP="1" URL="http://acs.talktalk.co.uk:7547/ACS-server/ACS" Username="" Password="LlciMSOweByD1v5dj2NltG==" PeriodicInformEnable="1" PeriodicInformInterval="86400" ConnectionRequestUsername="userid" ConnecionRequestPassword="Lp0xkiAANwcYpVPbI3D/Mg==" X_ConnReqPort="7547" X_UseOpt43Url="0" UpgradesManaged="0">

Been setup like this for 3 days and still pending an update

[Bald_Eagle1]

Just to add that with beta testing help from kitzuser87430, I am very close to releasing an update to HG612 Modem Stats that will work with the HG635.

Quick update:

Almost there bar a bit of fine-tuning.

Example of 1 day's Ongoing stats graphs montage attached for reference (G.DMT mode connection).

[phi2008]

Is the HG635 ping latency issue fixed now?

[GigabitEthernet]

Apologies for the bump.

I was wondering if there would be a way to enable VDSL bridge mode on the HG635?

[Dray]

Set the connection type to Bridged ?

[kitzuser87430]

I seem to remember from the talk-talk members forum (can't find it at the moment)

On VDSL the hg635 can only be bridged on a TT connection just use auto/dhcp on the router (not PPPoe)

Ian

[GigabitEthernet]

Ah, I thought bridge mode didn't work on VDSL. Thanks!