for some reason I am unable to login to the HG612 GUI using 192.168.1.1 have the unlocked GUI version, the last time this happened BT updated the firmware dslstats and HG612 modem stats is still working.
It worked a few weeks ago but it's like it's gone
Could someone who has the newer firmware with the GUI enable version check this is the case.
That seemed to have happened to me last week (or at least that's when the GUI didn't work when I tried it).
I don't use the HG612's own GUI very much these days, so I hadn't noticed until I tried to login.
I had been 'tinkering', so I assumed I must have reverted to BT's original updated firmware version & forgotten about it.
As I assumed I had caused the GUI to disappear, I reinstalled Wolfy's unlocked GUI version without first bothering to check the version number via telnet.
If you haven't yet reinstalled the GUI version, could you check the version number via Telnet to see if it is any different to Wolfy's version?
It may also be worth you posting your stats from
xdslcmd info --stats and
xdslcmd info --pbParams for us to examine for any subtle changes.
I have just checked & the GUI is still working here & this is the version number reported:-
xdslcmd --version
xdslcmd version 1.0
DSL PHY: AnnexA version - A2pv6C038m.d24j
******* Pass *********
I don't use the no btagent version as I
do want to receive any remote updates to compare etc. so I'm a little annoyed that I didn't investigate anything when it happened to me.
It may be pure coincidence, but my connection reverted to fastpath on Wednesday when the connection resynced without my intervention.
There was no obvious cause for the resync showing in the ongoing stats that have continued to work throughout.