Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 64 65 [66]

Author Topic: ZyXEL VMG8324-B10A Firmware  (Read 525944 times)

majnu

  • Member
  • **
  • Posts: 48
Re: ZyXEL VMG8324-B10A Firmware
« Reply #975 on: February 10, 2022, 08:28:54 PM »

Thanks john and Alex
Logged

Weaver

  • Senior Kitizen
  • ******
  • Posts: 11459
  • Retd s/w dev; A&A; 4x7km ADSL2 lines; Firebrick
Re: ZyXEL VMG8324-B10A Firmware
« Reply #976 on: February 10, 2022, 10:33:41 PM »

You also get the good easy stats via http on port 8000
Logged

Uwain

  • Just arrived
  • *
  • Posts: 8
Re: ZyXEL VMG8324-B10A Firmware
« Reply #977 on: February 18, 2022, 12:20:55 PM »

Is there any way to get official archived firmware from a Zyxel website anymore?

I just got a used one of these thats currently running 1.00(AAKL.10)C0_20151008 with a newer version in the other firmware partition
Code: [Select]
> sys fwselect show
Version in first partition: 1.00(AAKL.15)C0
Version in second partition: 1.00(AAKL.10)C0_20151008

I have not yet done a hard reset - I will clear the john lewis branding and do a reset soon... I just want to get a feel for how it currently works.

I'm gonna try brother Johnsons firmware, but I want to have a way to return to what I have.
I've tried finding a way to extract the firmware without hardware/wires - but I have failed - any ideas?

I have downloaded the latest firmware from that dutch site - I would prefer an official site... but I can't find any archives?


If anyone is reading this, is it normal to have very high load even when just operating the device in bridged modem mode only?
Top shows average load at around 2.0... I seem to have rather a lot of mm.exe processes?
CPU shows a lot of idle though - confuses me!
Can I kill/stop all of the unnecessary processes? I tried disabling everything in the GUI - but no change.


Code: [Select]
~ # top
Mem: 105984K used, 17748K free, 0K shrd, 0K buff, 34304K cached
CPU0:  0.1% usr  0.3% sys  0.0% nic 97.6% idle  0.0% io  1.3% irq  0.3% sirq
CPU1:  0.5% usr  2.3% sys  0.0% nic 92.8% idle  0.0% io  4.1% irq  0.0% sirq
Load average: 2.00 2.03 2.03 2/95 8309
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
 2372  2370 supervis S     7176  5.7   1  1.0 swmdk
 8305  8304 supervis R     2152  1.7   0  0.3 top
31824   275 supervis S     8776  7.0   1  0.2 sshd -m 0
 2371  2370 supervis S     7176  5.7   1  0.1 swmdk
 2541   263 supervis S <   2544  2.0   1  0.1 /bin/mm.exe
 2681   263 supervis S <   2544  2.0   0  0.1 /bin/mm.exe
    7     2 supervis SW       0  0.0   0  0.1 [sirq-net-rx/0]
31829 31824 supervis S     8800  7.0   1  0.0 sshd -m 0
  278   275 supervis S     8736  7.0   1  0.0 ssk
  269   217 supervis S <   8656  6.9   0  0.0 /bin/icf.exe
  279   269 supervis S <   8656  6.9   0  0.0 /bin/icf.exe
  280   279 supervis S <   8656  6.9   1  0.0 /bin/icf.exe
 1229   275 supervis S     8576  6.9   0  0.0 mcpd -m 0
 2281   275 supervis S     8456  6.8   0  0.0 celld -m 0
 2724  2281 supervis S     8456  6.8   1  0.0 celld -m 0
 1786   275 supervis S     8172  6.5   0  0.0 wlmngr -m 0
 2274   275 supervis S     7936  6.3   1  0.0 voiceApp -m 0
 2374  2373 supervis S     7936  6.3   1  0.0 voiceApp -m 0
 2687  2373 supervis S <   7936  6.3   0  0.0 voiceApp -m 0
 2373  2274 supervis S     7936  6.3   1  0.0 voiceApp -m 0
 2686  2373 supervis S <   7936  6.3   0  0.0 voiceApp -m 0
 3429   275 supervis S     7672  6.1   1  0.0 tr69c -m 0
 2278   275 supervis S     7564  6.0   0  0.0 link_updown
 2276   275 supervis S     7176  5.7   1  0.0 swmdk
 2370  2276 supervis S     7176  5.7   1  0.0 swmdk
 2283   275 supervis S     6772  5.4   0  0.0 EmappS -m 0
 2337  2283 supervis S     6772  5.4   1  0.0 EmappS -m 0
 2338  2337 supervis S     6772  5.4   0  0.0 EmappS -m 0
 2282   275 supervis S     6424  5.1   0  0.0 linkstatus
 2277   275 supervis S     6384  5.1   0  0.0 watchdog -m 0
 1862   275 supervis S     5752  4.6   0  0.0 webipqd
  275   217 supervis S     5512  4.4   1  0.0 smd
 1232   275 supervis S     4744  3.8   1  0.0 rastatus6
 2683   263 supervis S <   2544  2.0   0  0.0 /bin/mm.exe
  263   217 supervis S <   2544  2.0   0  0.0 /bin/mm.exe
 2684   263 supervis S <   2544  2.0   1  0.0 /bin/mm.exe
  272   271 supervis S     2544  2.0   1  0.0 /bin/mm.exe
 2680   263 supervis S <   2544  2.0   1  0.0 /bin/mm.exe
  274   271 supervis S     2544  2.0   0  0.0 /bin/mm.exe
  273   271 supervis S     2544  2.0   1  0.0 /bin/mm.exe
 2470   263 supervis S <   2544  2.0   0  0.0 /bin/mm.exe
 2685   271 supervis S     2544  2.0   1  0.0 /bin/mm.exe
 2682   263 supervis S <   2544  2.0   0  0.0 /bin/mm.exe
 2679   263 supervis S <   2544  2.0   1  0.0 /bin/mm.exe
  271   263 supervis S     2544  2.0   1  0.0 /bin/mm.exe
  217     1 supervis S     2184  1.7   0  0.0 -/bin/sh
 8304  8303 supervis S     2152  1.7   1  0.0 sh
    1     0 supervis S     2140  1.7   0  0.0 init
 8303 31829 supervis S     2136  1.7   1  0.0 sh -c sh
 2275   275 supervis S     1508  1.2   0  0.0 dsldiagd
18267   275 supervis S     1412  1.1   0  0.0 sntp -s 162.159.200.123 -s 193.47.
 1820     1 supervis S     1400  1.1   0  0.0 /bin/wlevt
 3979   275 supervis S      976  0.7   1  0.0 dnsmasq
    9     2 supervis SW       0  0.0   0  0.0 [sirq-tasklet/0]
    5     2 supervis SW       0  0.0   0  0.0 [sirq-timer/0]

I'm a total noob... so go easy please!
Logged

Edinburgh_lad

  • Reg Member
  • ***
  • Posts: 232
Re: ZyXEL VMG8324-B10A Firmware
« Reply #978 on: February 18, 2022, 12:43:16 PM »

I have a new 8924 from John Lewis and would be grateful if anyone would point me to the official download for firmware. The one that's on the router is ancient: version 24 from 2018! That's like an eternity ago. 
« Last Edit: February 18, 2022, 02:08:58 PM by Edinburgh_lad »
Logged

Uwain

  • Just arrived
  • *
  • Posts: 8
Re: ZyXEL VMG8324-B10A Firmware
« Reply #979 on: February 18, 2022, 05:46:28 PM »

I have a new 8924 from John Lewis and would be grateful if anyone would point me to the official download for firmware. The one that's on the router is ancient: version 24 from 2018! That's like an eternity ago.

I did notice that there is a version 24 for you on a Zyxel website that you could download and keep to return to in future.
Look here - https://www.zyxel.com/us/en/support/bcmupnp_hunter_botnet.shtml

I'm not sure if this is official Zyxel site, but it has version 28 for you...
https://support.zyxel.eu/hc/en-us/articles/4403361365778-Advanced-Downloads-for-CPE-devices

I haven't tried these download links... and I did find some download links for my modem that didn't work... so good luck!
« Last Edit: February 18, 2022, 05:53:05 PM by Uwain »
Logged

francisuk1989

  • Member
  • **
  • Posts: 26
    • Twitter
Re: ZyXEL VMG8324-B10A Firmware
« Reply #980 on: February 20, 2022, 12:53:04 AM »

I have a new 8924 from John Lewis and would be grateful if anyone would point me to the official download for firmware. The one that's on the router is ancient: version 24 from 2018! That's like an eternity ago.

There is another one from a Switzerland that sells Routers/Switches and Modems etc with FW 1.00(AAKL.28)C0 and Dated 11.01.2019 however im not sure if the FW is in English but the PDF's are in English.

from the ZIP file
Code: [Select]
[francis@archkde 1.00(AAKL.28)C0]$ ls -al
26893341 Nov 27  2018 '1.00(AAKL.28)C0.bin'
1062066 Jan  3  2019 '1.00(AAKL.28)C0.pdf'
80819 Nov 14  2018 '1.00(AAKL.28)C0.rom'
225979 Jan  3  2019 'VMG8924-B10A_V1.00(AAKL.28)C0-foss.pdf

Get it from
https://www.studerus.ch/de/support/downloadcenter or transfer.sh Mirror
Under Downloads > Anzeigen set this to 100
Under Filter type in VMG8924

There no downloads for the VMG8324-B10A but VMG1312-B10A there is also 1.00(ABDC.2b2X) = X been C, D, E and dated 01.06.2018
« Last Edit: February 20, 2022, 01:11:41 AM by francisuk1989 »
Logged
Zen Unlimited Fibre 2 80/20 connected via Huawei 288 Cabinet
ZyXEL VMG8924-B10A Bridged to FRITZ!Box 7530 with OpenWrt
BT Mobile SIM Only (10GB) Virgin Mobile SIM Only (6GB) Dual SIM with Oppo A54 5G

tonygibbs16

  • Member
  • **
  • Posts: 38
Re: ZyXEL VMG8324-B10A Firmware
« Reply #981 on: February 02, 2023, 06:17:06 PM »

Hello,

The ZIP file from the Studerus.ch website has official firmware in it.

The release notes say that v28 supports the following platforms:

ZyXEL
VMG8924 B10A & VMG8324 B10A

Release notes dated as follows:
2018/11/27 33.2 Raghu FW release for V1.00(AAKL.28)C0

Kind regards,
    Tony

Logged

AUG

  • Just arrived
  • *
  • Posts: 9
  • casus belli
Re: ZyXEL VMG8324-B10A Firmware
« Reply #982 on: August 27, 2023, 06:18:51 PM »

10 years past
Logged
Beginnings come at random,but endings always have a reason.

tubaman

  • Senior Kitizen
  • ******
  • Posts: 12514
Re: ZyXEL VMG8324-B10A Firmware
« Reply #983 on: August 28, 2023, 07:55:52 AM »

10 years past

??
10 years past what?
Logged
BT FTTC 55/10 Huawei Cab - Zyxel VMG8924-B10A
Pages: 1 ... 64 65 [66]