Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 23 24 [25] 26 27 ... 65

Author Topic: ZyXEL VMG8324-B10A Firmware  (Read 387803 times)

clonc

  • Member
  • **
  • Posts: 54
Re: ZyXEL VMG8324-B10A Firmware
« Reply #360 on: December 15, 2015, 04:19:45 PM »

Vdsl profile 30a is new....or am i wrong?

Inviato dal mio SM-N9005 utilizzando Tapatalk

Logged

Starman

  • Reg Member
  • ***
  • Posts: 180
Re: ZyXEL VMG8324-B10A Firmware
« Reply #361 on: December 15, 2015, 05:00:47 PM »

Quote
> swversion
1.00(AAKL.11)C0
Quote
> xdslctl profile --show

Modulations:
        G.Dmt   Enabled
        G.lite  Enabled
        T1.413  Enabled
        ADSL2   Enabled
        AnnexL  Enabled
        ADSL2+  Enabled
        AnnexM  Disabled
        VDSL2   Enabled
VDSL2 profiles:
        8a      Enabled
        8b      Enabled
        8c      Enabled
        8d      Enabled
        12a     Enabled
        12b     Enabled
        17a     Enabled
        30a     Disabled
        US0     Enabled
Phone line pair:
        Inner pair
Capability:
        bitswap         On
        sra             On
        trellis         On
        sesdrop         Off
        CoMinMgn        Off
        24k             On
        phyReXmt(Us/Ds) On/On
        TpsTc           AvPvAaPa
        monitorTone:    On
        dynamicD:       On
        dynamicF:       On
        SOS:            On
        Training Margin(Q4 in dB):      -1(DEFAULT)
Quote
> xdslctl info --version
xdslctl: ADSL driver and PHY status
Status: Idle
Last Retrain Reason:    0
Last initialization procedure status:   0

xdslctl version 1.2
ADSL PHY: AnnexA version - A2pv6F039o1.d26a

I believe its supported by the hardware and cmd line but it wasn't an option within the GUI to enable it.
Logged

npr

  • Reg Member
  • ***
  • Posts: 257
Re: ZyXEL VMG8324-B10A Firmware
« Reply #362 on: December 15, 2015, 06:33:15 PM »

The only difference I've notice with the new firmware is the GUI seems a bit snappier.

Other comments:
Reply to pings from WAN are enabled in the "Remote MGMT" section, which I think changed from being enabled in the Firewall section in FW AAKL.11
Still only allows one telnet session.  ???
Still slow to renew the PPP session.  ???
Logged

jasjeet

  • Member
  • **
  • Posts: 86
Re: ZyXEL VMG8324-B10A Firmware
« Reply #363 on: December 18, 2015, 05:48:17 PM »

Im still struggling to stabilise my connection.
The v7 fw stopped the massive FEC's, but it was inherently unstable, the Wifi drops out, and sometimes it just decides to reboot. Due to this, the sync slowly dropped from 37mb to 27mb. Longest uptime without it crashing was 3 days.

So im trying v12 now, if millions of FEC/min comes back, then ill try again with V7.

Will keep you updated.
Logged

Balb0wa

  • Member
  • **
  • Posts: 44
Re: ZyXEL VMG8324-B10A Firmware
« Reply #364 on: December 18, 2015, 06:16:34 PM »

Every firmware since V7  was rubbish for me, hence still on v7
Logged

jasjeet

  • Member
  • **
  • Posts: 86
Re: ZyXEL VMG8324-B10A Firmware
« Reply #365 on: December 19, 2015, 10:31:14 AM »

Took 10 hours until 100,000 FEC/min, and as time passes that's gone up to 700,000 FEC/min.

And bit swapping goes to 0 at the point when FEC/min goes silly high.
« Last Edit: December 19, 2015, 10:52:21 AM by jasjeet »
Logged

KeRbDoG

  • Just arrived
  • *
  • Posts: 2
Re: ZyXEL VMG8324-B10A Firmware
« Reply #366 on: December 22, 2015, 02:01:06 PM »

V100AAKL12C0.bin firmware released
Logged

broadstairs

  • Kitizen
  • ****
  • Posts: 3350
Re: ZyXEL VMG8324-B10A Firmware
« Reply #367 on: December 22, 2015, 02:39:03 PM »

V100AAKL12C0.bin firmware released

Er... yes back on the 15th in this post it was already mentioned.

Stuart
Logged
ISP:TalkTalk Connection:FTTC Cab:ECI Router:Netgear D6220

jasjeet

  • Member
  • **
  • Posts: 86
Re: ZyXEL VMG8324-B10A Firmware
« Reply #368 on: December 24, 2015, 12:15:38 AM »

Contacted Zyxel about the FEC issue, they don't seem to have any idea yet....
Logged

KeRbDoG

  • Just arrived
  • *
  • Posts: 2
Re: ZyXEL VMG8324-B10A Firmware
« Reply #369 on: December 31, 2015, 02:44:25 PM »

V100AAKL12C0.bin firmware released

Er... yes back on the 15th in this post it was already mentioned.

Stuart

Awesome - running it since and no issues
Logged

lcl00

  • Member
  • **
  • Posts: 96
Re: ZyXEL VMG8324-B10A Firmware
« Reply #370 on: January 02, 2016, 12:33:05 AM »

Has anyone got any experience with 12C0 connecting any slower/faster than the other releases?

I use 1.00(AAKL.7) currently and experience no real issues.  It connects as fast as a HG612 and is very stable, doesn't reset and I don't have the reported issue with CRC errors going crazy.

I'm pretty sure leaving it well alone would be the best option, but if there are speed gains then I might be tempted! :)
Logged

HDTechVideo

  • Member
  • **
  • Posts: 38
Re: ZyXEL VMG8324-B10A Firmware
« Reply #371 on: January 02, 2016, 12:00:13 PM »

Hi, I have two ZyXel VMG8324-B10A devices, Both with same firmware but I noticed that one of the device have VoIP option. Why is it so? any idea?
Logged

Starman

  • Reg Member
  • ***
  • Posts: 180
Re: ZyXEL VMG8324-B10A Firmware
« Reply #372 on: January 02, 2016, 12:06:12 PM »

Weird - I suggest first step is to simply reboot the router if that doesn't restore it perhaps a factory restore and finally re-flash the firmware.
Logged

HDTechVideo

  • Member
  • **
  • Posts: 38
Re: ZyXEL VMG8324-B10A Firmware
« Reply #373 on: January 02, 2016, 12:22:34 PM »

Updated with the latest firmware but still no option for VoIP.
Logged

HDTechVideo

  • Member
  • **
  • Posts: 38
Re: ZyXEL VMG8324-B10A Firmware
« Reply #374 on: January 02, 2016, 01:38:20 PM »

See the menu difference as well. Dont know it is happening. any help is really appreciate. thanks.
Logged
Pages: 1 ... 23 24 [25] 26 27 ... 65