Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HDTechVideo]

Yesterday I managed to unbrand my eFibre F1000 modem with help of this forum members. After that I tried to update tge firmware listed in OP via normal firmware update method but it is not allowing. Do I have to use the same unbranding methid to update the firmware. Thanks...

[kitz]

Thanks ronski for sharing this link

new firmware V100AAKL6b1 available.   Ive been using it for the past day.  It seems stable and the web GUI appears a little faster - especially the login page.

https://www.dropbox.com/s/i8hn2klokggi1sy/V100AAKL6b1.bin?dl=0

[Chrysalis]

kitz can I mirror these on my webspace?

also you put the first 3 have to be in order, if I go straight to kl6b1 from shipping fw will that work?

cannot grab the pdf, dropbox is weird

[kitz]

V100AAKL6b1 should be fine - its only the first 3 that were like that.

I didnt see a pdf for it.  Did you manage to get the firmware ok?

[Chrysalis]

I got it in the end yeah, by the way that firmware you crossed out I suggest you uncross it, its the same as the version that shipped with my device KL4C0 which is a non beta release, seems odd you recommend a older beta over that version.  But I guess you crossed it out as you didnt personally use it to verify stable for you?

The one and only firmware zyxel list (I agree is poor going) is older than what shipped with my router.

[kitz]

The links crossed out were actually for the VMG8924 and wouldnt load on the VMG8324 - see   http://forum.kitz.co.uk/index.php?topic=14084.msg264981#msg264981.   You may be interested in that thread as manny had a QoS issue on the VMG8924

Hence why I crossed it out and then put a link to Jeroens post.   Those were f/w from a Belgium ISP and not Zyxel.. hence why they also werent listed in the main section.   I'll try edit that post to make it clearer.

[Chrysalis]

tomorrow I will retest the kl6 version and this time do a settings wipe after flashing.

So far no reply from zyxel support.

[Jeroen06]

Seems that the link to the V100AAKL6b1 firmware is broken, could anyone reupload it? I would like to test it and compare it with the V100AAKL5C0 firmware I am currently using.
I am experiencing some DHCP problems with the V100AAKL5C0. And also had some problems with port forwarding, the rules do not work after an reboot of the modem.

So hopefully some of these issues are fixed in that (beta) firmware 

[kitz]

Seems that the link to the V100AAKL6b1 firmware is broken, could anyone reupload it?

Grr..  I noticed yesterday they pulled some other links too.   Ive uploaded it if anyone needs it

[Jeroen06]

Great! Thnx   

[Chrysalis]

in my opinion zyxel pulling links isnt on, whats their problem?  Given the bugs I seen reported on here, they need to replace the one on their website.

[Balb0wa]

the last two firmwares have been dodgy for me, a few wireless things wont connect, sky go wireless thing, and my nexus 5. Other wireless devices connect ok to the zyxel though.

b2 is the only one that is perfect for me.

[manny2003]

Seems that the link to the V100AAKL6b1 firmware is broken, could anyone reupload it? I would like to test it and compare it with the V100AAKL5C0 firmware I am currently using.
I am experiencing some DHCP problems with the V100AAKL5C0. And also had some problems with port forwarding, the rules do not work after an reboot of the modem.

So hopefully some of these issues are fixed in that (beta) firmware 

Yes Jeroen, I can confirm you the same problems with 5C0 on my VMG8924. Port forwarding is reset after reboot but also after a disconnect/reconnection of the WAN port (in my case a DSL PPPoE).
Also the DHCP is faulty but it has been fixed with a minor release (always 5C0 but with the date 20140617). In case it could be useful to someone (despite the new beta 6) I post you a link I host with this release:
https://dl.dropboxusercontent.com/u/72648012/V100AAKL5C0_20140911.bin

The links crossed out were actually for the VMG8924 and wouldnt load on the VMG8324 - see   http://forum.kitz.co.uk/index.php?topic=14084.msg264981#msg264981.   You may be interested in that thread as manny had a QoS issue on the VMG8924

Hence why I crossed it out and then put a link to Jeroens post.   Those were f/w from a Belgium ISP and not Zyxel.. hence why they also werent listed in the main section.   I'll try edit that post to make it clearer.

Thank you Kitz for the credits in the OP!

For the QoS problem that I had, I don't remember if I've already talk here about how I have fix it, in any case just FYI I changed the WAN protocol from PPPoA to PPPoE (my provider accepts both) and now it is working. It is a bug with the PPPoA protocol I have already submitted to the customer service.

[kitz]

I can confirm you the same problems with 5C0 on my VMG8924. Port forwarding is reset after reboot but also after a disconnect/reconnection of the WAN port (in my case a DSL PPPoE).

I think Ronski had exactly that same issue.  Zyxel gave him a link for V100AAKL6b1.bin which has hopefully cured it. 
The only thing is they pulled the link soon after, so its a good job he kindly shared the link and I was able to get a copy before they deleted it..  I dont know why they are so hesitant about leaving up the more recent firmwares :/

[Ronski]

I had a resync the other day and port forwarding was fine afterwards, so it has indeed fixed it.