Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bald_Eagle1]

VDSL uses PTM which the modem is set up to use by default.

ADSL uses ATM which you have to configure the modem to use.

I don't believe that's necessary if the HG612 is used with default bridged mode settings with a router attached.

These are the default settings (all flavours ADSL enabled apart from AnnexM):-

Code: [Select]


xdslcmd profile --show

Modulations:
G.Dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
AnnexM Disabled
VDSL2 Enabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra On
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: Off
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)

I think some of the Capability settings are automatically changed slightly when the modem is used for ADSL connections.

The modem's default IP Address is 192.168.1.1 & admin is used for both Username & password.

Windows users should be able to use the 'arp -a' command in a command window to see what is connected.

e.g:-

C:\Users\Paul>arp -a

Interface: 192.168.1.100 --- 0xa
  Internet Address      Physical Address      Type
  192.168.1.1           5c-7d-5e-ee-cc-63     dynamic
  192.168.1.3           00-01-e6-8f-90-a1     dynamic
  192.168.1.6           bc-f2-af-97-b9-ed     dynamic
  192.168.1.254         e0-91-f5-f8-57-88     dynamic
  192.168.1.255         ff-ff-ff-ff-ff-ff     static
  224.0.0.22            01-00-5e-00-00-16     static
  224.0.0.252           01-00-5e-00-00-fc     static
  239.255.255.250       01-00-5e-7f-ff-fa     static

[BobbyNewportPandR]

Ah excellent- thank you! Hopefully when my line switches over it will be all ready to go then

*Edit - Just seen your post Eagle- I'm on a mac now but I'll see if I can do that on here...

[BobbyNewportPandR]

Code: [Select]


xdslcmd profile --show

Modulations:
G.Dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
AnnexM Disabled
VDSL2 Enabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra On
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: Off
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)

I think some of the Capability settings are automatically changed slightly when the modem is used for ADSL connections.

The modem's default IP Address is 192.168.1.1 & admin is used for both Username & password.

Windows users should be able to use the 'arp -a' command in a command window to see what is connected.

e.g:-

C:\Users\Paul>arp -a

Interface: 192.168.1.100 --- 0xa
  Internet Address      Physical Address      Type
  192.168.1.1           5c-7d-5e-ee-cc-63     dynamic
  192.168.1.3           00-01-e6-8f-90-a1     dynamic
  192.168.1.6           bc-f2-af-97-b9-ed     dynamic
  192.168.1.254         e0-91-f5-f8-57-88     dynamic
  192.168.1.255         ff-ff-ff-ff-ff-ff     static
  224.0.0.22            01-00-5e-00-00-16     static
  224.0.0.252           01-00-5e-00-00-fc     static
  239.255.255.250       01-00-5e-7f-ff-fa     static

Ok, so I'm back and I've managed to telnet into my huawei through my asus router and here's what I found:

Code: [Select]


# xdslcmd profile --show

Modulations:
G.Dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
AnnexM Disabled
VDSL2 Enabled
VDSL2 profiles:
8a Enabled
8b Enabled
8c Enabled
8d Enabled
12a Enabled
12b Enabled
17a Enabled
30a Enabled
US0 Enabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra Off
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: On
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)
# arp -a
? (192.168.1.146) at XX:XX:XX:XX:XX:XX [ether] on br0
? (192.168.1.254) at XX:XX:XX:XX:XX:XX [ether] on br0
#

So mine look the same as yours, other than my sra capability being off, I'll see if I can get that on... (the X's were put in by me, those were two healthy looking MAC addresses...) DHCP server is off, uPnP is off too although I don't know if that should be on on my modem... Firewall is off but I haven't altered NAT or QoS settings as I don't know what I'm doing there..

Attached are a few pics of some of my settings in my modem, just in case anything stands out as wrong...

[NewtronStar]

Don't know if it makes much difference but i turn off all the modulation types except for VDSL2 as this is what is being used on this line.

Code: [Select]

        ADSL2   Disabled
        AnnexL  Disabled
        ADSL2+  Disabled
        AnnexM  Disabled
        VDSL2   Enabled
VDSL2 profiles:
        8a      Enabled
        8b      Enabled
        8c      Enabled
        8d      Enabled
        12a     Enabled
        12b     Enabled
        17a     Enabled
        30a     Enabled
        US0     Enabled
Phone line pair:
        Inner pair
Capability:
        bitswap         On
        sra             On
        trellis         On
        sesdrop         Off
        CoMinMgn        Off
        24k             On
        phyReXmt(Us/Ds) Off/On
        TpsTc           AvPvAa
        monitorTone:    On
        dynamicD:       On
        dynamicF:       Off
        SOS:            On
        Training Margin(Q4 in dB):      -1(DEFAULT)
#

[BobbyNewportPandR]

Hmm I did try that- although it would never have worked as I've got until the 9th until they switch me to fibre...

[BobbyNewportPandR]

Ok, so I'm back again....

I've been switched over to fibre, and tried hooking up my set up ( HG612 3B and RT-AC66U)

But unfortunately it just doesn't seem to work. In the log the ASUS does say:

Jan  1 00:00:20 WAN Connection: ISP's DHCP did not function properly.

I left it for about an hour, then tried changing my password so that it didn't have ' ' around it, but to no avail... I've also got my HG612 on vDSL2 only, and it recognises my line capabilities as well as the fact that I have a connection, but I cannot connect to the internet if I use the ethernet port..

Any advice?

[Dray]

Looks like you have configured the modem as a router instead of a bridge.

As the modem is by default a VDSL bridge, a factory reset is a quick fix but will leave it locked, so you will have to unlock it again.

[BobbyNewportPandR]

Looks like you have configured the modem as a router instead of a bridge.

As the modem is by default a VDSL bridge, a factory reset is a quick fix but will leave it locked, so you will have to unlock it again.

Just did a factory reset and again followed the instructions to unlock the device- it still says route rather than bridge though?

[Dray]

On PTM 1.101? You sure? Sorry, I can't help

[BobbyNewportPandR]

On PTM 1.101? You sure? Sorry, I can't help

Sadly so by the looks of it.. been scouring the web for setting but no luck

[Dray]

Just a thought - you did do a looong reset, 20 seconds I think you need to press the button for ?

[BobbyNewportPandR]

Hmm no- instructions I followed said press the button, turn it on and hold for 5 seconds and then you're able to log in and it will instruct you to install new firmware. Will try with a 20sec reset

[BobbyNewportPandR]

Just a thought - you did do a looong reset, 20 seconds I think you need to press the button for ?

Ok, have done the long reset and the settings have been reset to factory- it hasn't wiped the firmware either (still the hacked fw). I'll let you know how I get on...

[BobbyNewportPandR]

Ok- worked! Once I'd taken out the apostrophes from the username/password combo it worked perfectly. The factory reset (which has indeed changed my PTM1.101 settings to bridged etc.) must have been crucial too. Thank you everybody for your help!

[Dray]

That's good news