Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 2 [3] 4

Author Topic: bt fibre 2  (Read 23218 times)

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #30 on: February 28, 2014, 11:04:25 AM »

not happy from 55mbps to 47 48mbps is the max my line can hold so from home to first cabinet 209 yards away

5. VDSL uptime:   0 days, 07:26:49
6. Data rate:   9551 / 33944
7. Maximum data rate:   9719 / 39582-----and looks like its capped at 40mbps
8. Noise margin:   6.2 / 6.1
9. Line attenuation:   0.0 / 20.7
10. Signal attenuation:   0.0 / 19.6
« Last Edit: February 28, 2014, 01:56:32 PM by covlad1987 »
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #31 on: March 03, 2014, 11:10:00 AM »

this is becoming a joke now from sync of 55mbps and a ip profile of 49mbps and now down to this

Download speedachieved during the test was - 38.38 Mbps
 For your connection, the acceptable range of speedsis 31.22 Mbps-39.02 Mbps .
 Additional Information:
 IP Profile for your line is - 39.02 Mbps

Upload speed achieved during the test was - 6.54Mbps
 Additional Information:
 Upstream Rate IP profile on your line is - 20 Mbps
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #32 on: March 03, 2014, 12:54:21 PM »

yesterday test and todays so now if i was still with talktalk and sky 40/10 id be happy

Logged

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7411
  • VM Gig1 - AAISP CF
Re: bt fibre 2
« Reply #33 on: March 03, 2014, 03:04:14 PM »

no idea how far 200 yards is sorry but your attenuation is about 30% higher than mine so would guestimate approx 450-550m distance?
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #34 on: March 04, 2014, 09:54:14 AM »

eather way bt capped my boardband thay say no we dont do that  :no: :no: :no: :no: :no: ok my bt so why am i not getting above 40mbps now when i was before
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #35 on: March 04, 2014, 12:17:55 PM »

update

openreach  today

replaced the (faultymaster socket) that was put in on the 18th feb sync speed 26mbps he then did a ip profile reset sync speed upto 55mbps he
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: bt fibre 2
« Reply #36 on: March 04, 2014, 04:13:05 PM »

Result!  :)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #37 on: March 04, 2014, 04:40:36 PM »

Result!  :)

yes after 3 vists from openreach what pees me off is the first one fits new master socket and the second never picked up it was fualty and the 3rd one who was good changed the socket and did a ip profile reset lol

now im going to find out why my uploads not moved for 30 days and then speak to bt about about of compo  :lol: :lol: :lol: :lol: :lol: :lol: :lol:

oh forgot this ones to the openreach guys on here

is it true you can not go up the poles with out the use of a cherry picker ?

and thankyou all who advised me over the last month
Logged

c6em

  • Reg Member
  • ***
  • Posts: 504
Re: bt fibre 2
« Reply #38 on: March 04, 2014, 05:15:39 PM »

So far as I am aware from the state of the pole outside my house......

If the pole is out of its inspection routine time then this will be the case.
It is not the case that the pole is dangerous - it's just that is has not been inspected and passed off as OK within the required elapsed time and so cannot be climbed.
I recall there are markers on the post to indicate when it was inspected.
All that is required is an inspection to be done and if the pole passes then it can be climbed again.

There may be other issues relating to access and safety of course that in certain circumstances require a cherry picker van to be used regardless of the status of the pole itself.
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: bt fibre 2
« Reply #39 on: March 04, 2014, 05:16:05 PM »

is it true you can not go up the poles with out the use of a cherry picker ?

According to my understanding a pole can still be climbed in the traditional fashion as long as: (1) it has been inspected in the normal testing cycle and found to be free of defects (2) the technician performs the specified pre-climbing tests and is satisfied that the pole is still sound.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #40 on: March 04, 2014, 06:47:03 PM »

 :-X :-X :-X my router VDSL uptime 7hrs doing well here  :lol:
Logged

Black Sheep

  • Helpful
  • Addicted Kitizen
  • *
  • Posts: 5722
Re: bt fibre 2
« Reply #41 on: March 04, 2014, 07:22:06 PM »

Yeah, the lads above have pretty much covered it.

A 'Cherry-picker' would normally only be used if the pole is deemed un-climbeable. There's a variety of reasons this could be such, including being out of the 13yr test-cycle, no test label on show, low wires, a designated 'D' Pole (Dangerous), to much 'furniture' at the pole top. There are other categories as well such as 'H' (Hazard) Poles, 'SD' (Shallow Depth) poles …. etc ….. but the engineer has the last say in whether he climbs or not. It is down to his own personal risk assessment at that time, even if all other measures are met.



Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #42 on: March 04, 2014, 09:00:10 PM »

cheers for the info on the poles lol

9hrs 24mins and still no resync doing good  :lol:

5. VDSL uptime:   0 days, 09:27:34
6. Data rate:   10674 / 56652
7. Maximum data rate:   11063 / 56792
8. Noise margin:   6.4 / 5.8

pigging thing resynced at 530am this morning  :no: :no:

Download speed : 65.27Mbps
Upload speed : 9.85Mbps

Download speed : 62.72Mbps
Upload speed : 9.95Mbps
« Last Edit: March 05, 2014, 10:36:36 AM by covlad1987 »
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #43 on: March 06, 2014, 02:44:19 PM »

5. VDSL uptime:   0 days, 21:20:37 :lol: :lol: :lol:
6. Data rate:   10909 / 56275
7. Maximum data rate:   11072 / 56889

i see my upload as not gone up  :no:
Logged

covlad1987

  • Reg Member
  • ***
  • Posts: 171
Re: bt fibre 2
« Reply #44 on: March 07, 2014, 10:17:38 AM »

1 day 7 hrs still not resync doing well

http://www.thinkbroadband.com/speedtest/button/139418726348664739874-mini.png

anyone no whats the burst thing is
Logged
Pages: 1 2 [3] 4