Broadband Related > Router Monitoring Software
HG612 Modem Stats r1.1 issue
door_bell:
Gents,
Connection is awesome, but I was keen to get some logging up and running. I've got myself a HG612 (and unlocked it) and setup dslstats - works wonderfully.
I was hoping to get HG612 Modem Stats r1.1 running too alongside, but I just can't get it going.
Configured with all the right paths and IP, etc, but when I click 'Run GraphPD' on the settings editor, it just sits there and I get this:
--- Code: ---Please enter the period to plot ===>
***************************************************
* *
* The period to plot was not specified. *
* The default period of 1440 m will be plotted. *
* *
***************************************************
You entered (or it was determined) a period of 1440 m
Log file name wasn't entered - Using default modem_stats.log and subfolders
RROR! C:\HG612_Modem_Stats_Programs-r1.1\Ongoing_Stats\modem_stats.log does NOT
exist or could NOT be opened for reading
ress any key to exit
--- End code ---
I setup a scheduled task and checked all creds were fine, so it should be recording?
If I click Run Snapshot Stats, it launches and produces the following and sits forever with GRAPH6.exe chewing up 25% of the CPU time until I kill it using taskmanager. this is the output:
--- Code: --- Creating log file Plink_20140109-1424.log
Delaying snapshot data harvesting by 10 seconds to avoid clashes with any other
scheduled data harvesting tasks
# 1 of 16
## 2 of 16
### 3 of 16
#### 4 of 16
##### 5 of 16
###### 6 of 16
####### 7 of 16
######## 8 of 16
######### 9 of 16
########## 10 of 16
########### 11 of 16
########### 11a of 16
########### 11b of 16
########### 11c of 16
############ 12 of 16
############# 13 of 16
############## 14 of 16
############### 15 of 16
################ 16 of 16
Data has been harvested...... Please wait if plotting the graphs
GRAPHING_COMMAND = ""C:\HG612_Modem_Stats_Programs-r1.1\Scripts\GRAPH6.exe" "C:\
HG612_Modem_Stats_Programs-r1.1\Current_Stats\Current_Stats_20140109-1424\Plink_
20140109-1424.log""
At the end of HG612_current_stats.exe - Now about to start the graphing via GRA
PH6.exe
*****************************************************
Now at the start of GRAPH6.exe
It looks like you are using Windows 7 (or possibly a server version of it)
The local time is: 14:25:14.010
****************************************************************************
* *
* Creating Huawei HG612 Connection Statistics Graphs *
* *
****************************************************************************
* Attainable Rates = Max: Upstream rate = 36781 Kbps, Downstream rate = 10
6804 Kbps
* Actual Sync speeds = Bearer: 0, Upstream rate = 20000 Kbps, Downstrea
m rate = 79987 Kbps
Total Seconds = 402840
* Discovery Phase (Initial) Band Plan = US: (6,31) (882,1193) (1984,2770)
* Discovery Phase (Initial) Band Plan = DS: (33,857) (1218,1959) (2795,4083)
* Medley Phase (Final) Band Plan = US: (6,31) (882,1193) (1984,2770)
* Medley Phase (Final) Band Plan = DS: (41,857) (1218,1959) (2795,4083)
* PROFILE determined from --show = 17a
--- End code ---
Running SBS2011 Essentials, X64. It's 8GB RAM and has a XEON processor inside - so it shouldn't be slow (I'd hope).
Where to start, have I done something daft?
DSLstats has no issues running or capturing data and network is all fine too.
Help :'(
(reason I'm looking to get some recording on the go, is because I notice the little ECI cab up the road has been surrounded by lots of yellow paint - I expect it'll be upgraded to the bigger cab soon, so I want to make sure it doesn't affect me!!!)
burakkucat:
1440 minutes is just a day. Has the modem stats utility gathered a day's worth of data?
If not, that may be the cause of the problem. Could it be attempting to plot the graphs without sufficient data? :-\
door_bell:
Had left the scheduled task running for about 5 days in total.
Where is all the data kept.....?
Outgoing stats has three files:
error.log
graphpd_ERROR.LOG
xlogfile.txt
current stats folder has a number of folders inside.
Not sure really. Tried setting the value to 3 d and 3d but no joy there either.
burakkucat:
Sorry but I am not the person to ask. :no:
The featherless Eagle has currently taken Mrs Eagle away on an expensive holiday . . . Perhaps Ronski will be able to help? :-\
NewtronStar:
Just make sure you have installed the most upto date files from BaldEagle, I think this is the link for those files http://forum.kitz.co.uk/index.php?action=dlattach;topic=13078.0;attach=10708
you will need to replace these files and remove the older ones, the location for those files resides in the default folder C:\HG612_Modem_Stats\Scripts.
Navigation
[0] Message Index
[#] Next page
Go to full version