Hi,
We have been having issues with a adsl line for a long time now getting a lot of FEC and HEC errors.
Basically we've had zen get bt out that ended up being a personal friend, so he was able to skip the usual rigmarole and got a REIN engineer out within 30 minutes. He used the mimtel 444b rf tester and eventually it turned out to be two circuits of lighting. We cannot turn these off permanently as staff would not be able to work.
The problem is there is roughly 240 led 240v (was halogen) down lights. It wasn't every one causing the issues with the 444b, i've pulled the ones I can remember. However now an engineer is offsite I cannot locate the faulty lightbulbs causing the REIN. I've tried using a cheap radio from amazon but need something to try and find the fault that is not expensive and lets me isolate which bulbs of EFI issues. The minute I turn the two circuits off the problem near enough goes away (there is more of these bulbs upstairs but doesnt seem to cause no where as many FEC/HEC issues with them turned.
The problem G10 bulbs where from ledhut.
Any ideas?
Thanks,
Chris