Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roseway]

I'm at a loss to explain this at the moment. I didn't really change anything in the way DSLstats logs in and collects its data in this version, except for one extra check on the connection stats for Technicolor routers. If your stats are blank, then that check isn't the explanation here.

The only other thing I can suggest at this point is that you revert to version 4.12 and make sure that it still works properly. You only need to copy the executable dslstats.exe from the old version to replace the new one. Tomorrow I'll reinstall my TG582n and see if I can find out what's happening, but it will have to wait until the afternoon unfortunately.

@renluop: I owe you an apology. I've set up my TG582n and got the "No DSL connection" message (although I didn't get "Router failed to respond to telnet request", and I can think of no reason for that one). I've traced the cause of the problem (it related to a check on non-Technicolor routers which was also being applied to Technicolor routers by mistake). I've fixed it and DSLstats is now running properly with the TG582n.

I do have to go out now, but I'll try to upload fixed versions later.

[renluop]

No apology at all is owed me!  

[roseway]

Version 4.21 now uploaded, fixing the issues reported above:

- corrected the cosmetic error on the custom commands page in the Windows version
- corrected formatting of the pbParams display for VDSL2 connections which don't report band U4
- corrected wrongly coloured graphs with VDSL2 connections which don't use band U0 (hopefully)
- corrected "No DSL connection" error with Thomson/Technicolor routers

http://dslstats.plainroad.me.uk

[zhadoom]

Version 4.21 now uploaded, fixing the issues reported above:

- corrected formatting of the pbParams display for VDSL2 connections which don't report band U4
- corrected wrongly coloured graphs with VDSL2 connections which don't use band U0 (hopefully)

Confirmed. Both issues are corrected.

[renluop]

 

[roseway]

Thanks both.

[broadstairs]

Eric not a big issue but when I check for a new version it says I'm up to date 

Stuart

[kitz]

Thanks eric.  All seems ok here

[roseway]

Eric not a big issue but when I check for a new version it says I'm up to date 

Stuart

Thanks Stuart. I keep a file called VERSION on my website for the purposes of this check, and I hadn't updated it to 4.21. It's corrected now.

Thanks eric.  All seems ok here

Thanks for confirming it.

[broadstairs]

Thanks Eric 4.21 now running and all OK....

Stuart

[burakkucat]

Reporting a minor formatting phoo-bah: "(From start of recording)" (The 64-bit Linux version.) Please see the screen-scrape, below.

[roseway]

Thanks Mr Cat. I'll increase the separation a bit next time.

[les-70]

  Eric,

   Just to thank you and report that the updated custom commands work well for me and that no problems have been found in my use.

[roseway]

Many thanks Les.

[Mark1]

Two minor issues:

1) Under Bitswaps per Tone, horizontal compression doesn't "stick" between restarts.

2) Under Stats, attenuation is blank.