Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Vaako]

@roseway
Okay I understand, thanks anyway!

@AlecR
We are only allowed use these devices in Belgium:

• B-Box 2 (inside Sagem F@st 3464) = vectoring-friendly
• Sagem F@st 3464 = vectoring-friendly
• FRITZ!Box 7360 = full Vector.G support (upcomming certificated modem for 2014)
• B-Box 3 (inside Technicolor TG589Bvn 5GHz Xtream) = full Vector.G support
• O-Box 3 (inside Technicolor TG789Bvn 5GHz) = full Vector.G support

These modems are on the whitelist when it handshakes to the DSLAM and are all certifiet modems.
If the modem is whitelisted you get the full service and highest posible dsl-line-profile true DLM procedure.
If your modem is NOT on the whitelist it does not give it a SYNC or if it syncs (some older VDSL modems as B-Box1) you get only 7Mb/s Downstream and 512kb/s Upstream.

This is the situation at the moment in Belgium

[roseway]

DSLstats does work with the Technicolor TG589vn v3, but at the moment I don't know how the TG589Bvn differs from it.

[GigabitEthernet]

Do you by any chance use Annex B rather than A in Belgium?

[Vaako]

DSLstats does work with the Technicolor TG589vn v3, but at the moment I don't know how the TG589Bvn differs from it.

I have a O-Box 3 witch is in fact a TG789Bvn.
It's not in use at the moment because of firmware issues but I can setup and look if I can login with Telnet.
I wil post my findings here.

Do you by any chance use Annex B rather than A in Belgium?

We have both in Belgium.

Annex A for POTS (Analog Line)
Annex B for ISDN (Digital Line)

But all modems (ADSL2 / VDSL2) are sold as Annex-A

Why do you want to now?

[roseway]

I have a O-Box 3 witch is in fact a TG789Bvn.
It's not in use at the moment because of firmware issues but I can setup and look if I can login with Telnet.
I wil post my findings here.

That could certainly be interesting.

[Vaako]

I have tested the O-Box 3 (TG789Bvn) and there is no Telnet session posible because Telnet is not enabled on this device.

Telnet is on port 23 and it is not open.
A portscan of open ports gave these results:

21
53
80
139
443
1723

Next thing to do is to get Telnet working on this device and if succeed it wil be posted here.

[Vaako]

I have a O-Box 3 witch is in fact a TG789Bvn.
It's not in use at the moment because of firmware issues but I can setup and look if I can login with Telnet.
I wil post my findings here.

That could certainly be interesting.

Well it is interesting indeed 

I have open another topic about this O-Box 3 here: http://forum.kitz.co.uk/index.php?topic=13645.msg256996#msg256996