Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1] 2 3 ... 5

Author Topic: Huawei HG612 Firmware -- Proposed Testing  (Read 25833 times)

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Huawei HG612 Firmware -- Proposed Testing
« on: October 26, 2013, 11:36:34 PM »

In my grotto I have a Huawei HG612 Home Gateway and a Planet VC-230N. The latter device is currently configured in CO mode with profile 17a.

If it would be considered worthwhile, I could flash each of the various firmware images listed below into the HG612 and record the basic statistics once the device has synchronised with the VC-230N. Each test would be carefully controlled to ensure that they were all carried out under identical conditions.

The firmware images that I have selected for testing are:
  • The original Asbo unlocked
  • The Asbo unlocked, with the new BLOB
  • The Wolfy unlocked, with the GUI
Do fellow Kitizens think it would be worthwhile exercise?  :-\
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #1 on: October 26, 2013, 11:42:27 PM »


Do fellow Kitizens think it would be worthwhile exercise?  :-\


Indeed it would  8)
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #2 on: October 27, 2013, 12:05:00 AM »

Thank you. Obviously my testing would not be as extensive as that which Asbokid could perform with his Huawei SmartAX MA5616 MSAN  :no:  but it should provide some metrics for comparison.  :)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #3 on: October 27, 2013, 10:58:10 AM »

  Sounds really helpful especially if you have enough cable to give some typical attenuation between the devices.  I would not have thought that the trouble that Asbo went to with baluns would be needed as you be using the same device with any impedance issues fixed, and just changing firmware.
Logged

roseway

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 43608
  • Penguins CAN fly
    • DSLstats
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #4 on: October 27, 2013, 11:11:41 AM »

I agree, it looks like very useful research.
Logged
  Eric

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #5 on: October 27, 2013, 09:46:36 PM »

Thank you, all, for your feedback.

I've put this little project onto my 'ToDo' list and now will try to find the time to action it.  ;)

Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #6 on: October 29, 2013, 09:52:07 PM »

Finally 'the time was ripe' ((C) 1980s Sir Humphrey Appleby of Yes, Minister and Yes, Prime Minister fame) and some testing was performed.

The HG612 firmware images tested were:

(1) Original Asbo Image Unlocked.
(2) Asbo Image Unlocked, With New BLOB.
(3) Wolfy Image Unlocked, With GUI.

The VC-230N Configuration ('One Port DSLAM'):

Profile 17a, Annex A.
SNRM set to 6 dB.
Interleaved (8 ms).
INP set to 3.
No rate capping.

Local loop length == 1.5 metres.

Testing Procedure:

VC-230N powered up.
After 5 minutes, HG612 powered up.
After 5 minutes, HG612 GUI statistics gathered,
                        HG612 CLI statistics gathered,
                        VC-230N GUI statistics gathered.

Attached, below, are four files -- showing the VC-230N's configuration and the line_stats_p obtained from the HG612 with each of the firmware images, listed above, installed in turn.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #7 on: October 29, 2013, 09:57:50 PM »

Attached, below, are the corresponding first HG612 GUI pages for each of the firmware images tested.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #8 on: October 29, 2013, 09:59:22 PM »

Attached, below, are the corresponding second HG612 GUI pages for each of the firmware images tested.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #9 on: October 29, 2013, 10:00:56 PM »

Attached, below, are the corresponding VC-230N GUI pages for each of the firmware images tested.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #10 on: October 29, 2013, 10:11:56 PM »

Finally the ASCII text data from the HG612, for each of the firmware images tested, can be supplied via e-mail to anyone interested.

The data collected was the output returned by the following nine xdslcmd lines --
  • xdslcmd --version
  • xdslcmd profile --show
  • xdslcmd info --vendor
  • xdslcmd info --cfg
  • xdslcmd info --stats
  • xdslcmd info --show
  • xdslcmd info --Bits
  • xdslcmd info --pbParams
  • xdslcmd info --linediag
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 33884
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #11 on: October 29, 2013, 10:24:31 PM »

Thank you B*cat..    I has headache & since I have to be up early tomorrow, now is possibly not the best time for me to be looking at stats in depth :D

I shall give closer strutiny to pbParams and graphs when I have a clear head,  however I cant help but notice both of Asbos give a similar attainable rate on the HG GUI.  The 3rd shows a better SNRm and therefore higher attainable rate.   I do note that the 3rd upstream attainable appears to be capped at 51316?
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #12 on: October 29, 2013, 10:49:44 PM »

Quote
I do note that the 3rd upstream attainable appears to be capped at 51316?

That is very odd. It is certainly not something that I had configured . . . The VC-230N was (and still is) set to 'No rate capping'.   ???

I'll send you a ZIP format file of all the data, via e-mail, for your consideration on another day -- when there are less empty wine bottles a-rolling across the floor, chased by kittehs . . .  ::)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #13 on: October 29, 2013, 10:57:42 PM »

Finally the ASCII text data from the HG612, for each of the firmware images tested, can be supplied via e-mail to anyone interested.



I'd also be interested in a copy of the zip file containing all the data, please.
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Huawei HG612 Firmware -- Proposed Testing
« Reply #14 on: October 29, 2013, 11:01:20 PM »

How could I forget that beak?  :-X  My tail still remembers the last time that it was tweaked.  :'(
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.
Pages: [1] 2 3 ... 5