Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GigabitEthernet]

Eric, could you add an option to show the Error Seconds graphs in line chart form, rather than bar chart form?

[ryant704]

The problem seems to be that, since the firmware update, DSLstats isn't detecting the band plan correctly. I'm guessing that the actual plotted data is correct but the colours are wrong. The band plan information is extracted from the output of the pbParams command, so if you could copy that data to me I'll try to find out what's going wrong.

Here you go!

xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason:   0
Last initialization procedure status:   0
Max:   Upstream rate = 4909 Kbps, Downstream rate = 24316 Kbps
Bearer:   0, Upstream rate = 4869 Kbps, Downstream rate = 19998 Kbps

Discovery Phase (Initial) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (33,857) (1218,1959) (2795,4083)
Medley Phase (Final) Band Plan
US: (6,31) (882,1193)
DS: (41,857) (1218,1558)
        VDSL Port Details        Upstream        Downstream
Attainable Net Data Rate:        4909 kbps          24316 kbps
Actual Aggregate Tx Power:          7.4 dBm           11.9 dBm
====================================================================================
   VDSL Band Status      U0      U1      U2      U3      U4      D1      D2      D3
  Line Attenuation(dB):    6.4    53.0    64.1     N/A     N/A    23.0    66.1     N/A   
Signal Attenuation(dB):    6.4    52.8     N/A     N/A     N/A    29.5    66.0     N/A   
      SNR Margin(dB):    6.5    6.1     N/A     N/A     N/A    14.6    14.6     N/A   
       TX Power(dBm):    1.9    6.0     N/A     N/A     N/A    11.2    3.3     N/A   
#

[burakkucat]

I would like to submit a feature request to your 'for consideration' list, please, Eric.

Select the Configuration tab and then look at the sub-tabs thus displayed. Currently they are (reading left to right) --

| Login | Special login | Graphs | Snapshots | Options | Misc | Traffic monitoring | Save/Restore XML | Advanced tweaks | Custom commands |

My feature request is two-fold:

(1) Capitalise the the initial letter of the second word of those tabs with two word titles (i.e. Special Login, Traffic Monitoring, Advanced Tweaks and Custom Commands).

(2) Swap the positional order of the Snapshots and Option tabs so that the left to right order becomes --

| Login | Special Login | Graphs | Options | Snapshots | Misc | Traffic Monitoring | Save/Restore XML | Advanced Tweaks | Custom Commands |

My reasoning being that it does not make sense to decide which graphs to automagically 'snapshot' before one has decided which graphs should be produced for monitoring.

(Also I wonder if there is a better description that could be used for the current Options tab?)

[roseway]

@ryant704: Thanks for the information.

@b*cat: Regarding the capitalisation of the second word, for consistency I would need to do it to all tabs, not just the ones under Configuration. I don't feel strongly one way or the other, so I'll probably go along with your suggestion.

I agree about the order of the tabs, and also that Options needs a more descriptive name (perhaps the same name as the title at the top of the page - "Items to Monitor").

[roseway]

Eric, could you add an option to show the Error Seconds graphs in line chart form, rather than bar chart form?

I'll put that on the list, but it will be a while before I can get round to it.

[snadge]

Thanks Eric, 

and thanks again for all your hard work on this program.. You should really should put a donate button somewhere as I wud like to pitch in for your efforts as you have implemented a few things for me like the rs/corr percentage, snr matching bits to scale,  dslam firmware and I really appreciate it, this program is the best dsl prog on the net...

What about a mobile app port?  Hehe

Sent from my Sony Xperia Miro on Tapatalk

[NewtronStar]

seems to work well to when running DSLstats & HG612stats at the same time no missing samples 

[roseway]

Thanks for confirming that.

[snadge]

B'Kat has just pointed out something I didnt know about the QLN, that it is only refreshed once per sync - I wasnt aware of this but makes sense now I know... oh well suppose I can just keep one snapshot of the line when its OK and never delete it!   

[ryant704]

So talking about the QLN graph, you said it would scan all the bands... it now how I use to think it was. It will only scan the bands in use, see picture.

This seems a bit odd it's just switching like this between re-syncs? Any ideas people?

[roseway]

In the latest version of DSLstats (4.1) I changed the band plan logic slightly so the per-tone graphs now only cover the range of tones in the medley phase. If this isn't what you want, let me know and I'll look at making it optional.

[ryant704]

In the latest version of DSLstats (4.1) I changed the band plan logic slightly so the per-tone graphs now only cover the range of tones in the medley phase. If this isn't what you want, let me know and I'll look at making it optional.

No it's fine, I thought it was to due with the sync not DSLStats.