Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 [2] 3 4 ... 6

Author Topic: HG612 modem firmware update & band plan changes October 2013  (Read 21535 times)

Ronski

  • Moderator
  • Kitizen
  • *
  • Posts: 3183
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #15 on: October 15, 2013, 01:30:41 PM »

Yes, it does write the line to the modem log.  See reply 12 above for a line which was written to the log when it crashed.

I'm only running 32bit Windows here at work, but I doubt it's a 32/64 bit thing.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

burakkucat

  • Global Moderator
  • Senior Kitizen
  • *
  • Posts: 26158
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #16 on: October 15, 2013, 09:43:37 PM »

I've started get HG612 stats crashing again on every run, it would occasionally do it, then every time it ran.

Running from a command prompt it produces this prior to crashing, hope it's some help. Perhaps I shouldn't say it, but the copy at home has been running fine.

Code: [Select]
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Ron>cd C:\HG612_Modem_Stats\Scripts\

C:\HG612_Modem_Stats\Scripts>

<snip>

Modem in use = HG622

<snip>

I am intrigued to see the line that I have snipped from the output, above.

Using a Huawei HG622:-\
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #17 on: October 15, 2013, 10:17:38 PM »


I am intrigued to see the line that I have snipped from the output, above.

Using a Huawei HG622:-\



I was hoping nobody would notice that  :-[

It's on my 'things to do' list, but quite a fair way down.

Logged

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #18 on: October 15, 2013, 10:20:03 PM »

Yes, it does write the line to the modem log.  See reply 12 above for a line which was written to the log when it crashed.

I'm only running 32bit Windows here at work, but I doubt it's a 32/64 bit thing.

The programs are compiled for 32 bit systems anyway, so it won't be that.
I've emailed a couple of test programs for you to try, when/if you get chance.

Logged

mikecrawford71

  • Just arrived
  • *
  • Posts: 4
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #19 on: October 15, 2013, 10:52:16 PM »

Any chance I can get a copy of the updated binaries too?

Noticed my stats were not working today either (application crash whenever it runs, and seems erratic creating the xlogfile.txt).

Running from command line outputs the following;

Code: [Select]

C:\HG612_Modem_Stats\Scripts>HG612_stats.exe
progname = HG612_stats.exe

The local time is: 22:45:00.291
A log file wasn't specified
argv[1] = (null)

path_only is C:\HG612_Modem_Stats\Scripts

At the start, working_directory (i.e. log_file_path) is


[Login] loaded from 'HG612_stats.ini':
    IP_address = 192.168.0.3
    Username   = admin
    Password   = admin
    Shell      = sh

[Locations] loaded from 'HG612_stats.ini':
    Main_folder          = C:\HG612_Modem_Stats
    Scripts_and_Programs = C:\HG612_Modem_Stats\Scripts
    Apps_folder          = C:\HG612_Modem_Stats\Apps
    Ongoing_Stats_folder = C:\HG612_Modem_Stats\Ongoing_Stats
    Current_Stats_folder = C:\HG612_Modem_Stats\Current_Stats


 [Mode] loaded from 'HG612_stats.ini':
    Mode                 = extensive

[Graphing] loaded from 'HG612_stats.ini':
  Pause_after_obtaining_snapshot_data   = NO
  Auto_graph_Snapshot_data              = YES
  Pause_after_snapshot_graphs_plotted   = NO
  Pause_after_ongoing_graphs_plotted    = NO
  Plot_area_background_colour           = 31
  Daily_Graphing                        = YES
  Daily_Graphing_Time                   = 06:00



  Delay_snapshot_data_harvest_seconds   = 10
  Delay_ongoing_data_harvest_seconds    = 0

  Ongoing_Logging         = YES
  Current_Stats           = NO
  Current_Stats_Interval  = 8
  Current_Stats_Datum     = 06
  Use_own_tasks           = NO
  Extensive_event_logging = YES
DEBUG_COMMENTS = YES
From HG612_stats.ini hard coding, the ongoing log_file = C:\HG612_Modem_Stats\Ongoing_Stats\modem_stats.log

error_log_file = C:\HG612_Modem_Stats\Ongoing_Stats\ERROR.LOG

xlog_file = C:\HG612_Modem_Stats\Ongoing_Stats\xlogfile.txt
Temp File ONGOING-ISRUNNING-224500-538.TXT was created

From HG612_stats.ini, Mode = extensive
Modex = 2

In switch, from HG612_stats.ini, Mode = extensive
Modem in use = HG622
Bearer_or Path = Max:, US sync = 0, DS sync = 0
Profile =

C:\HG612_Modem_Stats\Scripts>

ERROR.LOG file

Code: [Select]


15/10/2013 22:51:09.323 - [ IN HG612_stats.EXE ] - Start of 1 minute sampling
15/10/2013 22:51:09.537 - HG612_current_stats.exe was NOT running
15/10/2013 22:51:09.537 - Temp File ONGOING-ISRUNNING-225109-537.TXT was created
15/10/2013 22:51:10.080 - malloc() O.K.
15/10/2013 22:51:10.080 - Initializing Winsock
15/10/2013 22:51:10.084 - WSAStartup() SUCCESSFUL!!!
15/10/2013 22:51:10.084 - Starting getaddrinfo()
15/10/2013 22:51:10.084 - getaddrinfo() O.K.
15/10/2013 22:51:10.084 - Starting socket()
15/10/2013 22:51:10.090 - socket() O.K.
15/10/2013 22:51:10.090 - Starting connect()
15/10/2013 22:51:10.092 - connect() O.K.
15/10/2013 22:51:10.925 - About to reply(xdslcmd info --stats)
15/10/2013 22:51:10.925 - reply(xdslcmd info --stats) O.K.
15/10/2013 22:51:10.940 - In get_data(), ERROR - recv() FAILED - numbytes = -1!!!
15/10/2013 22:51:10.942 - ERROR - get_data() FAILED!!!! - exiting the program
15/10/2013 22:51:10.942 - About to close(sockfd)
15/10/2013 22:51:10.943 - About to freeadddrinfo(res)
15/10/2013 22:51:10.943 - About to WSACleanup()
15/10/2013 22:51:10.943 - About to free(txbuf)
15/10/2013 22:51:10.943 - About to free(rxbuf)
15/10/2013 22:51:10.944 - Current  sync speeds are     DS 0 kbps      US 0 kbps
15/10/2013 22:51:10.944 - Previous sync speeds are     DS 0 kbps      US 0 kbps
15/10/2013 22:51:10.944 - Sync speeds have NOT changed since the previous data harvest
15/10/2013 22:51:10.945 - ONGOING-ISRUNNING-225109-537.TXT DELETED
*********************************************************************************************************************
15/10/2013 22:51:10.945 - Scheduled Current_Stats logging is NOT switched on via the ini file
*********************************************************************************************************************
15/10/2013 22:51:10.945 - Scheduled Daily_Graphing is switched ON via the ini file
15/10/2013 22:51:10.945 - Daily_Graphing_hour    = 06
15/10/2013 22:51:10.945 - Daily_Graphing_minutes = 00
15/10/2013 22:51:10.945 - Current Time is Hours 22, Minutes 51
15/10/2013 22:51:10.945 - scheduled Daily_Graphing is NOT due yet
*********************************************************************************************************************
15/10/2013 22:51:10.948 - End of HG612_stats.exe program, EXIT error code = 0
15/10/2013 22:51:10.948 - End of HG612_stats.exe program, closing ERROR.LOG
Logged

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #20 on: October 15, 2013, 11:13:30 PM »

I'd rather hang on for a short while until the latest versions have been tested.

Possibly tomorrow????

Which Windows version(s) do you use?
Logged

Ronski

  • Moderator
  • Kitizen
  • *
  • Posts: 3183
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #21 on: October 16, 2013, 07:50:22 AM »

Unfortunately that didn't fix it, running from a command prompt this is all I get.

Code: [Select]
C:\HG612_Modem_Stats\Scripts>hg612_stats
progname = hg612_stats

The local time is: 07:46:28.156
A log file wasn't specified
argv[1] = (null)

path_only is C:\HG612_Modem_Stats\Scripts

At the start, working_directory (i.e. log_file_path) is

error from ini_parse_file() = 0

Before setting from config.Extensive_event_logging, DEBUG_COMMENTS = YES
From HG612_stats.ini hard coding, the ongoing log_file = C:\HG612_Modem_Stats\On
going_Stats\modem_stats.log

error_log_file = C:\HG612_Modem_Stats\Ongoing_Stats\ERROR.LOG

xlog_file = C:\HG612_Modem_Stats\Ongoing_Stats\xlogfile.txt
Temp File ONGOING-ISRUNNING-074628-312.TXT was created

'tasklist' is not recognized as an internal or external command,
operable program or batch file.
From HG612_stats.ini, Mode = extensive
Modex = 2

In switch, from HG612_stats.ini, Mode = extensive

Modem in use = HG622
VDSL2
Bearer_or Path = Bearer:, US sync = 6076, DS sync = 33690
Profile = 17a
MSGc = 18 DS & 33 US
October 2013 Firmware update = YES
Bitswap DS = 68679 / 56
parse_PbParams UPDATED FIRMWARE
firmware updated = YES
hgp.us_discovery_bp1_from = 6
hgp.us_discovery_bp1_to   = 31
hgp.us_discovery_bp2_from = 882
hgp.us_discovery_bp2_to   = 1193
hgp.us_discovery_bp3_from = 1984
hgp.us_discovery_bp3_to   = 2770

hgp.ds_discovery_bp1_from = 33
hgp.ds_discovery_bp1_to   = 857
hgp.ds_discovery_bp2_from = 1218
hgp.ds_discovery_bp2_to   = 1959
hgp.ds_discovery_bp3_from = 2795
hgp.ds_discovery_bp3_to   = 4083


hgp.us_line_attenuation_U0 = 3.8
hgp.us_line_attenuation_U1 = 41.6
hgp.us_line_attenuation_U2 = 60.1
hgp.us_line_attenuation_U3 = 0.0
hgp.us_line_attenuation_U4 = 0.0

hgp.ds_line_attenuation_D1 = 19.1
hgp.ds_line_attenuation_D2 = 52.5
hgp.ds_line_attenuation_D3 = 85.2


hgp.us_signal_attenuation_U0 = 3.8
hgp.us_signal_attenuation_U1 = 41.6
hgp.us_signal_attenuation_U2 = 0.0
hgp.us_signal_attenuation_U3 = 0.0
hgp.us_signal_attenuation_U4 = 0.0

hgp.ds_signal_attenuation_D1 = 19.9
hgp.ds_signal_attenuation_D2 = 52.1
hgp.ds_signal_attenuation_D3 = 0.0


SNR itch_buffer1 =              SNR Margin(dB):  5.1     6.0      N/A     N/A
  N/A    6.2     6.4      N/A
SNR itch_buffer2 =  5.1  6.0      N/A     N/A     N/A    6.2     6.4      N/A



hgp.us_snr_margin_U0 = 5.1
hgp.us_snr_margin_U1 = 6.0
hgp.us_snr_margin_U2 = 0.0
hgp.us_snr_margin_U3 = 0.0
hgp.us_snr_margin_U4 = 0.0

hgp.ds_snr_margin_D1 = 6.2
hgp.ds_snr_margin_D2 = 6.4
hgp.ds_snr_margin_D3 = 0.0


tx_power itch_buffer1 =                  TX Power(dBm):  2.0    -1.2      N/A
  N/A     N/A    8.5     7.3      N/A
tx_power itch_buffer2 =  2.0    -1.2      N/A     N/A     N/A    8.5     7.3
  N/A


hgp.us_tx_power_U0 = 2.0
hgp.us_tx_power_U1 = -1.2
hgp.us_tx_power_U2 = 0.0
hgp.us_tx_power_U3 = 0.0
hgp.us_tx_power_U4 = 0.0

hgp.ds_tx_power_D1 = 8.5
hgp.ds_tx_power_D2 = 7.3
hgp.ds_tx_power_D3 = 0.0
16/10/2013 07:46 Showtime 1 41876 6064 0 33690 6076 L0 VDSL2 VDSL2 B 17a PTM ON
ON No Showtime 6.4 6.0 24.5 0.0 11.0 3.7 47 190 1 1 64 5 16 16 0.0453 0.9988 112
96 1658 1429 1 64 207 64 207 34161328 961457 54 45 155279157 3209897 909540546 1
57 2083 0 457 0 23 0 23 0 2144376083 0 13703564 0 0 0 0 312 44 271 0 333 62 9948
8 8.00 0.00 2.91 16.29 16.00 0.00 65.92 19.14 68679 56 1270027036 210 3443 61 31
2 44 271 0 333 62 2 0 12 0 5510585 0 0 0 0 0 0 0 0 0 0 0 0 0 7988937 0 0 0 0 0 0
 0 0 0 0 0 0 0 555684351 66 17 21 4 14 0 0 0 0 0 0 0 0 714342685 144 3426 40 308
 30 271 0 333 62 2 0 12 0 909540546 157 54 45 10 28 0 0 0 0 0 0 0 0 seconds sinc
e the Epoch: 1381905960


 size of modem_stats.log is 79844953


fseek_success = 0
captured:
16/10/2013 07:45 33690 6076 6.5 6.0 11.0 3.7 42104 6078 PTM 3443 61 1269314849 2
10 457 0 99408 0 0 0 0 27.613 908828359 157 0 34133858 956523 22727638 54 45 0 1
48246647 2889317 0 2083 0 0 1429 1 312 44 271 0 0 0 0 0 0 0 3.8 41.6 60.1 0.0 19
.1 52.5 85.2 3.8 41.6 0.0 0.0 19.9 52.1 0.0 5.1 6.0 0.0 0.0 6.5 6.4 0.0 2.0 -1.2
 0.0 0.0 8.5 7.3 0.0 Showtime 1 0 L0 17a ON ON No Showtime 24.5 0.0 47 190 1 1 6
4 5 16 16 0.0453 0.9988 11296 1658 23 0 23 0 2139197906 0 13701254 0 0 0 0 333 6
2 8.00 0.00 2.91 16.29 16.00 0.00 65.92 19.14 68621 56 VDSL2 0 0

previous_day as string     = 16
previous_month as string   = 10
previous_year as string    = 2013

previous_hour as string     = 07
previous_minute as string   = 45


seconds since the Epoch: 1381905900
time_difference between current time & previous log time = 1 minutes


Total DS ES       = 312
Total US ES       = 44
PREVIOUS_DS_ES    = 312
PREVIOUS_US_ES    = 44
At START, DS_ES_THIS_PERIOD = 0
At START, US_ES_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_ES_THIS_PERIOD = 0

After calculating, US_ES_THIS_PERIOD = 0
DS_ES_THIS_PERIOD = 0, i.e. LESS THAN OR EQUAL TO 60
US_ES_THIS_PERIOD = 0, i.e. LESS THAN OR EQUAL TO 60


Total DS RSCorr                 = 909540546
Total US RSCorr                 = 157
PREVIOUS_DS_RSCorr              = 908828359
PREVIOUS_US_RSCorr              = 157
At START, DS_RSCorr_THIS_PERIOD = 0
At START, US_RSCorr_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_RSCorr_THIS_PERIOD = 712187


Total DS RSUnCorr                 = 2083
Total US RSUnCorr                 = 0
PREVIOUS_DS_RSUnCorr              = 2083
PREVIOUS_US_RSUnCorr              = 0
At START, DS_RSUnCorr_THIS_PERIOD = 0
At START, US_RSUnCorr_THIS_PERIOD = 0
file EXISTS!



Total DS RS                 = 155279157
Total US RS                 = 3209897
PREVIOUS_DS_RS              = 148246647
PREVIOUS_US_RS              = 2889317
At START, DS_RS_THIS_PERIOD = 0
At START, US_RS_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_RS_THIS_PERIOD = 7032510
After calculating, US_RS_THIS_PERIOD = 320580


Total DS OHF                 = 34161328
Total US OHF                 = 961457
PREVIOUS_DS_OHF              = 34133858
PREVIOUS_US_OHF              = 956523
At START, DS_OHF_THIS_PERIOD = 0
At START, US_OHF_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_OHF_THIS_PERIOD = 27470

After calculating, US_OHF_THIS_PERIOD = 4934


Total DS OHFErr                 = 54
Total US OHFErr                 = 45
PREVIOUS_DS_OHFErr              = 54
PREVIOUS_US_OHFErr              = 45
At START, DS_OHFErr_THIS_PERIOD = 0
At START, US_OHFErr_THIS_PERIOD = 0
time_difference                 = 60
file EXISTS!



Total DS HEC                 = 457
Total US HEC                 = 0
PREVIOUS_DS_HEC              = 457
PREVIOUS_US_HEC              = 0
At START, DS_HEC_THIS_PERIOD = 0
At START, US_HEC_THIS_PERIOD = 0
file EXISTS!



Total DS CRC                 = 3443
Total US CRC                 = 61
PREVIOUS_DS_CRC              = 3443
PREVIOUS_US_CRC              = 61
At START, DS_CRC_THIS_PERIOD = 0
At START, US_CRC_THIS_PERIOD = 0
file EXISTS!



Total DS FEC                 = 1270027036
Total US FEC                 = 210
PREVIOUS_DS_FEC              = 1269314849
PREVIOUS_US_FEC              = 210
At START, DS_FEC_THIS_PERIOD = 0
At START, US_FEC_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_FEC_THIS_PERIOD = 712187


log_stats.mode = VDSL2

Total DS bitswap                 = 68679
Total US bitswap                 = 56
PREVIOUS_DS_bitswap              = 68621
PREVIOUS_US_bitswap              = 56
At START, DS_bitswap_THIS_PERIOD = 0
At START, US_bitswap_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_bitswap_THIS_PERIOD = 58


Now writing data to MSLOGFILE.log (modem_stats.log)

Data has now been written to MSLOGFILE (modem_stats.log)


sockfd has been closed
freeaddrinfo(res) completed
WSACleanup has completed
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

mikecrawford71

  • Just arrived
  • *
  • Posts: 4
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #22 on: October 16, 2013, 08:51:47 AM »

Possibly tomorrow?

Which Windows version(s) do you use?

No rush, would just like to assist with testing.

Running a Windows 7 (32bit) VM, but can try it on Windows 8 or Server 2012.

Logged

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #23 on: October 17, 2013, 08:14:37 AM »

I can now report that my HG612's firmware was updated overnight.

My recently amended versions of the programs continued running on my W 7 setup, but caused a 'stuck' instance of HG612_stats.exe on a Vista laptop running a previous version.

Ending the stuck process allowed logging to continue & I have now installed the latest version on the Vista laptop.
It is running happily at the moment.

I have attached various updated programs if users wish to test them out & provide feedback, especially XP users, where there does seem to still be an issue.

All 3 programs need to be used to hopefully avoid issues, or at least pinpoint where issues are found.

The programs do create a number of debugging log files, stored in the Scripts, Ongoing_Stats & Current_stats folders.

It would be helpful to post details from these logs if issues are indeed still present, particularly "ERROR.LOG_file_ERROR.TXT", located in the Ongoing_Stats folder.

Logged

Ronski

  • Moderator
  • Kitizen
  • *
  • Posts: 3183
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #24 on: October 17, 2013, 08:23:21 AM »

BE, I've tested last nights version.

This is the contents of the ERROR_LOG_file_ERROR.TXT when it crashes.

Code: [Select]
17/10/2013  8:04:00.20 - In [HG612_stats.exe] - After ini_parse(). ERROR.LOG status = 0,
17/10/2013  8:04:00.23 - ERROR.LOG successfully opened. Status = 1,
17/10/2013  8:04:00.46 - ONGOING-ISRUNNING-080400-328.TXT - There are 1 instances of HG612_stats.exe running. Status = 1,
17/10/2013  8:04:00.50 - ONGOING-ISRUNNING-080400-328.TXT - ** Continuing as there are only 1 instances of HG612_stats.exe running **. Status = 1,
17/10/2013  8:04:01.51 - ONGOING-ISRUNNING-080400-328.TXT - **** Reaching this point means logging in to the modem was successful. Status = 1,
17/10/2013  8:04:01.53 - ONGOING-ISRUNNING-080400-328.TXT - After xdslcmd info --stats(), ERROR.LOG status = 1
17/10/2013  8:04:01.70 - ONGOING-ISRUNNING-080400-328.TXT - After xdslcmd info --pbParams(), ERROR.LOG status = 1
17/10/2013  8:04:02.10 - ONGOING-ISRUNNING-080400-328.TXT - Logged out of modem O.K. Status = 1,
17/10/2013  8:04:02.18 - ONGOING-ISRUNNING-080400-328.TXT - Now in exit. Status = 1,
17/10/2013  8:04:02.21 - ONGOING-ISRUNNING-080400-328.TXT - *** WSACleanup has completed.

This is the contents of the CMD window.

Code: [Select]
C:\HG612_Modem_Stats\Scripts>hg612_stats
progname = hg612_stats

The local time is: 08:04:00.140
A log file wasn't specified
argv[1] = (null)

path_only is C:\HG612_Modem_Stats\Scripts

At the start, working_directory (i.e. log_file_path) is

error from ini_parse_file() = 0

Before setting from config.Extensive_event_logging, DEBUG_COMMENTS = YES
From HG612_stats.ini hard coding, the ongoing log_file = C:\HG612_Modem_Stats\On
going_Stats\modem_stats.log

error_log_file = C:\HG612_Modem_Stats\Ongoing_Stats\ERROR.LOG

xlog_file = C:\HG612_Modem_Stats\Ongoing_Stats\xlogfile.txt
Temp File ONGOING-ISRUNNING-080400-328.TXT was created

'tasklist' is not recognized as an internal or external command,
operable program or batch file.
From HG612_stats.ini, Mode = extensive
Modex = 2

In switch, from HG612_stats.ini, Mode = extensive

Modem in use = HG622
VDSL2
Bearer_or Path = Bearer:, US sync = 6076, DS sync = 33690
Profile = 17a
MSGc = 18 DS & 33 US
October 2013 Firmware update = YES
Bitswap DS = 128495 / 93
parse_PbParams UPDATED FIRMWARE
firmware updated = YES
hgp.us_discovery_bp1_from = 6
hgp.us_discovery_bp1_to   = 31
hgp.us_discovery_bp2_from = 882
hgp.us_discovery_bp2_to   = 1193
hgp.us_discovery_bp3_from = 1984
hgp.us_discovery_bp3_to   = 2770

hgp.ds_discovery_bp1_from = 33
hgp.ds_discovery_bp1_to   = 857
hgp.ds_discovery_bp2_from = 1218
hgp.ds_discovery_bp2_to   = 1959
hgp.ds_discovery_bp3_from = 2795
hgp.ds_discovery_bp3_to   = 4083


hgp.us_line_attenuation_U0 = 3.8
hgp.us_line_attenuation_U1 = 41.6
hgp.us_line_attenuation_U2 = 60.1
hgp.us_line_attenuation_U3 = 0.0
hgp.us_line_attenuation_U4 = 0.0

hgp.ds_line_attenuation_D1 = 19.1
hgp.ds_line_attenuation_D2 = 52.5
hgp.ds_line_attenuation_D3 = 85.2


hgp.us_signal_attenuation_U0 = 3.8
hgp.us_signal_attenuation_U1 = 41.6
hgp.us_signal_attenuation_U2 = 0.0
hgp.us_signal_attenuation_U3 = 0.0
hgp.us_signal_attenuation_U4 = 0.0

hgp.ds_signal_attenuation_D1 = 19.9
hgp.ds_signal_attenuation_D2 = 52.1
hgp.ds_signal_attenuation_D3 = 0.0


SNR itch_buffer1 =              SNR Margin(dB):  6.1     6.0      N/A     N/A
  N/A    6.6     6.4      N/A
SNR itch_buffer2 =  6.1  6.0      N/A     N/A     N/A    6.6     6.4      N/A



hgp.us_snr_margin_U0 = 6.1
hgp.us_snr_margin_U1 = 6.0
hgp.us_snr_margin_U2 = 0.0
hgp.us_snr_margin_U3 = 0.0
hgp.us_snr_margin_U4 = 0.0

hgp.ds_snr_margin_D1 = 6.6
hgp.ds_snr_margin_D2 = 6.4
hgp.ds_snr_margin_D3 = 0.0


tx_power itch_buffer1 =                  TX Power(dBm):  2.0    -1.2      N/A
  N/A     N/A    8.5     7.3      N/A
tx_power itch_buffer2 =  2.0    -1.2      N/A     N/A     N/A    8.5     7.3
  N/A


hgp.us_tx_power_U0 = 2.0
hgp.us_tx_power_U1 = -1.2
hgp.us_tx_power_U2 = 0.0
hgp.us_tx_power_U3 = 0.0
hgp.us_tx_power_U4 = 0.0

hgp.ds_tx_power_D1 = 8.5
hgp.ds_tx_power_D2 = 7.3
hgp.ds_tx_power_D3 = 0.0
17/10/2013 08:04 Showtime 1 42220 6058 0 33690 6076 L0 VDSL2 VDSL2 B 17a PTM ON
ON No Showtime 6.6 6.0 24.5 0.0 11.0 3.7 47 190 1 1 64 5 16 16 0.0453 0.9988 112
96 1658 1429 1 64 207 64 207 64191396 147514 125 164 3548009048 1195602 17402644
35 495 6062 0 1300 0 63 0 63 0 3510031809 0 28579124 0 0 0 0 329 105 271 0 333 6
2 186944 8.00 0.00 2.91 16.29 16.00 0.00 65.92 19.14 128495 93 2100750925 548 35
14 180 329 105 271 0 333 62 2 0 12 0 7229835 0 0 0 0 0 0 0 0 0 0 0 0 0 8346195 2
6 0 9 0 5 0 0 0 0 0 0 0 0 588903598 107 10 31 3 18 0 0 0 0 0 0 0 0 797504642 297
 78 109 18 57 0 0 0 0 0 0 0 0 1740264435 495 125 164 27 89 0 0 0 0 0 0 0 0 secon
ds since the Epoch: 1381993440


 size of modem_stats.log is 79848361


fseek_success = 0
captured:
17/10/2013 08:03 33690 6076 6.4 6.0 11.0 3.7 41876 6061 PTM 3514 180 2100172596
548 1300 0 186884 0 0 560095 0 51.912 1739686106 495 560095 64170792 143836 2025
9 125 164 0 3542734654 956603 5186497 6062 0 0 1429 1 329 105 271 0 0 0 0 239519
 3687 0 3.8 41.6 60.1 0.0 19.1 52.5 85.2 3.8 41.6 0.0 0.0 19.9 52.1 0.0 6.0 6.0
0.0 0.0 6.4 6.3 0.0 2.0 -1.2 0.0 0.0 8.5 7.3 0.0 Showtime 1 0 L0 17a ON ON No Sh
owtime 24.5 0.0 47 190 1 1 64 5 16 16 0.0453 0.9988 11296 1658 63 0 63 0 3506148
141 0 28578769 0 0 0 0 333 62 8.00 0.00 2.91 16.29 16.00 0.00 65.92 19.14 128452
 93 VDSL2 42 0

previous_day as string     = 17
previous_month as string   = 10
previous_year as string    = 2013

previous_hour as string     = 08
previous_minute as string   = 03


seconds since the Epoch: 1381993380
time_difference between current time & previous log time = 1 minutes


Total DS ES       = 329
Total US ES       = 105
PREVIOUS_DS_ES    = 329
PREVIOUS_US_ES    = 105
At START, DS_ES_THIS_PERIOD = 0
At START, US_ES_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_ES_THIS_PERIOD = 0

After calculating, US_ES_THIS_PERIOD = 0
DS_ES_THIS_PERIOD = 0, i.e. LESS THAN OR EQUAL TO 60
US_ES_THIS_PERIOD = 0, i.e. LESS THAN OR EQUAL TO 60


Total DS RSCorr                 = 1740264435
Total US RSCorr                 = 495
PREVIOUS_DS_RSCorr              = 1739686106
PREVIOUS_US_RSCorr              = 495
At START, DS_RSCorr_THIS_PERIOD = 0
At START, US_RSCorr_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_RSCorr_THIS_PERIOD = 578329


Total DS RSUnCorr                 = 6062
Total US RSUnCorr                 = 0
PREVIOUS_DS_RSUnCorr              = 6062
PREVIOUS_US_RSUnCorr              = 0
At START, DS_RSUnCorr_THIS_PERIOD = 0
At START, US_RSUnCorr_THIS_PERIOD = 0
file EXISTS!



Total DS RS                 = 3548009048
Total US RS                 = 1195602
PREVIOUS_DS_RS              = 3542734654
PREVIOUS_US_RS              = 956603
At START, DS_RS_THIS_PERIOD = 0
At START, US_RS_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_RS_THIS_PERIOD = 5274394
After calculating, US_RS_THIS_PERIOD = 238999


Total DS OHF                 = 64191396
Total US OHF                 = 147514
PREVIOUS_DS_OHF              = 64170792
PREVIOUS_US_OHF              = 143836
At START, DS_OHF_THIS_PERIOD = 0
At START, US_OHF_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_OHF_THIS_PERIOD = 20604

After calculating, US_OHF_THIS_PERIOD = 3678


Total DS OHFErr                 = 125
Total US OHFErr                 = 164
PREVIOUS_DS_OHFErr              = 125
PREVIOUS_US_OHFErr              = 164
At START, DS_OHFErr_THIS_PERIOD = 0
At START, US_OHFErr_THIS_PERIOD = 0
time_difference                 = 60
file EXISTS!



Total DS HEC                 = 1300
Total US HEC                 = 0
PREVIOUS_DS_HEC              = 1300
PREVIOUS_US_HEC              = 0
At START, DS_HEC_THIS_PERIOD = 0
At START, US_HEC_THIS_PERIOD = 0
file EXISTS!



Total DS CRC                 = 3514
Total US CRC                 = 180
PREVIOUS_DS_CRC              = 3514
PREVIOUS_US_CRC              = 180
At START, DS_CRC_THIS_PERIOD = 0
At START, US_CRC_THIS_PERIOD = 0
file EXISTS!



Total DS FEC                 = 2100750925
Total US FEC                 = 548
PREVIOUS_DS_FEC              = 2100172596
PREVIOUS_US_FEC              = 548
At START, DS_FEC_THIS_PERIOD = 0
At START, US_FEC_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_FEC_THIS_PERIOD = 578329


log_stats.mode = VDSL2

Total DS bitswap                 = 128495
Total US bitswap                 = 93
PREVIOUS_DS_bitswap              = 128452
PREVIOUS_US_bitswap              = 93
At START, DS_bitswap_THIS_PERIOD = 0
At START, US_bitswap_THIS_PERIOD = 0
file EXISTS!


After calculating, DS_bitswap_THIS_PERIOD = 43


Now writing data to MSLOGFILE.log (modem_stats.log)

Data has now been written to MSLOGFILE (modem_stats.log)


sockfd has been closed
freeaddrinfo(res) completed
WSACleanup has completed

I've not seen this problem before mentioning TaskList

Code: [Select]
C:\HG612_Modem_Stats\Scripts>hg612_stats
progname = hg612_stats

The local time is: 08:15:49.984
A log file wasn't specified
argv[1] = (null)

path_only is C:\HG612_Modem_Stats\Scripts

At the start, working_directory (i.e. log_file_path) is

error from ini_parse_file() = 0

Before setting from config.Extensive_event_logging, DEBUG_COMMENTS = YES
From HG612_stats.ini hard coding, the ongoing log_file = C:\HG612_Modem_Stats\On
going_Stats\modem_stats.log

error_log_file = C:\HG612_Modem_Stats\Ongoing_Stats\ERROR.LOG

xlog_file = C:\HG612_Modem_Stats\Ongoing_Stats\xlogfile.txt
Temp File ONGOING-ISRUNNING-081550-218.TXT was created

'tasklist' is not recognized as an internal or external command,
operable program or batch file.

C:\HG612_Modem_Stats\Scripts>

Another run also had an extra line in the ERROR_LOG_file_ERROR.TXT

Code: [Select]
17/10/2013  8:13:01.07 - In [HG612_stats.exe] - After ini_parse(). ERROR.LOG status = 0,
17/10/2013  8:13:01.10 - ERROR.LOG successfully opened. Status = 1,
17/10/2013  8:13:01.40 - ONGOING-ISRUNNING-081301-250.TXT - There are 1 instances of HG612_stats.exe running. Status = 1,
17/10/2013  8:13:01.42 - ONGOING-ISRUNNING-081301-250.TXT - ** Continuing as there are only 1 instances of HG612_stats.exe running **. Status = 1,
17/10/2013  8:13:02.25 - ONGOING-ISRUNNING-081301-250.TXT - **** Reaching this point means logging in to the modem was successful. Status = 1,
17/10/2013  8:13:02.28 - ONGOING-ISRUNNING-081301-250.TXT - After xdslcmd info --stats(), ERROR.LOG status = 1
17/10/2013  8:13:02.45 - ONGOING-ISRUNNING-081301-250.TXT - After xdslcmd info --pbParams(), ERROR.LOG status = 1
17/10/2013  8:13:02.85 - ONGOING-ISRUNNING-081301-250.TXT - Logged out of modem O.K. Status = 1,
17/10/2013  8:13:02.89 - ONGOING-ISRUNNING-081301-250.TXT - Now in exit. Status = 1,
17/10/2013  8:13:02.92 - ONGOING-ISRUNNING-081301-250.TXT - *** WSACleanup has completed.
17/10/2013  8:13:02.93 - ONGOING-ISRUNNING-081301-250.TXT - *** txbuf has been freed.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

Korben_dallas

  • Member
  • **
  • Posts: 81
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #25 on: October 17, 2013, 08:26:14 AM »

Many thanks for all your hard work in updating the programs, will download them and give them a go.
Logged

Ronski

  • Moderator
  • Kitizen
  • *
  • Posts: 3183
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #26 on: October 17, 2013, 08:35:02 AM »

BE, are you running Windows 7 Professional? If so you can download the free XP virtual machine. That will save you trying to source an XP system to test with at home.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #27 on: October 17, 2013, 12:28:22 PM »

Alas, no.

It is a Home Premium version.


I had considered ways of running XP via Mrs Eagle's laptop but that wouldn't work out too well as a) I'd never get chance to hog it while fiddling with programs & b) it's a bit too clapped out to use for XP dual booting/VMs etc.

Logged

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2720
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #28 on: October 17, 2013, 12:39:12 PM »


'tasklist' is not recognized as an internal or external command,
operable program or batch file.



That sounds like a XP Home version.
Tasklist should be included in XP Pro.


http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/how-and-where-do-i-download-and-run-missing/4f11c462-ca6a-4472-8713-b91c107441a5


It won't cause any errors other than to flag up that it wasn't found (unless it is installed, in which case it's something I need to look into a bit further).


Did the program crash immediately following the message?



If it isn't installed, any left over ISRUNNING files are likely to be blank.

« Last Edit: October 17, 2013, 12:48:21 PM by Bald_Eagle1 »
Logged

Ronski

  • Moderator
  • Kitizen
  • *
  • Posts: 3183
Re: HG612 modem firmware update & band plan changes October 2013
« Reply #29 on: October 17, 2013, 01:31:41 PM »

Yes, it is XP home, many years ago I made the mistake of getting home instead of professional. That also explains why the isrunning files are blank.


The text in the code window above is what happened, so it must have crashed out, and I'm sure there was an error, although I haven't seen.

Does C allow the use of Option Strict and Option Explicit or similar?  With vb.net these default to off, which is a very bad idea. With them set to on when the program is compiled it checks the validity of a lot of things which may cause problems at some point.  If you have these options it might highlight potential problems when compiling.

Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D
Pages: 1 [2] 3 4 ... 6