Hi Everyone,
Hope soemone can give me some advice/guidance.
I am planning to move my ADSL router to a new room and need to recable and also need to add a phone point.
My Master socket is not used as its location is not suitable and currently the ASDL router hangs of an extension
The attached pic is what I am proposing to do:
Master socket - was planning on adding either ADSL Nation XTE-2005 or BT VDSL Faceplate
Wiring between master and existing socket is already in place. Only intend to use unfiltered from faceplate to first extension.
Bedroom 1 - Intention is to extend from this socket to Bedroom 2 using CW1308 cable - unfiltered.
Bedroom 2 - Use XTF-85 for phone and ADSL router
Bedroom 3 - Extend from Bedroom 2 XTF-85 using CW1308
Hopefully that makes sense!
Couple of questions I have
ADSL Nation XTE-2005 or BT VDSL Faceplate? I have read not much difference except BT is passive ASDL Nation is active, also apparently the passive means less likelyhood of something failing?
XTF-85 is there an alternative ot is this a good option?
Also is it worth buying a high speed ADSL RJ11 cable or is it possible to make my own? CAT 6 cable with a couple of RJ11 plugs I have access to a crimping tool.
Is my approach sound?
Thanks in advance.