Topic: Which Hardware to use as a bridge?? (Read 2406 times)

Berrick · « **on:** August 06, 2013, 09:21:50 PM »

Evening one and all,

I am currently on BT adsl2, resisting infinity as I use BBtalk which is included in my BB package.

I would like to know which second hand hardware to get which would allow me to bridge adsl to Ethernet. I will then be using pfSense to handle F/W and nating.

I have tried doing this with a HH2a but couldn't stop the HH nat'ing which was causing problems (may have been the way I configured it thought

)

Many thanks

burakkucat · « **Reply #1 on:** August 07, 2013, 04:13:57 PM »

How about a DrayTek Vigor 120?

They turn up on eBay every so often and, assuming that I understand you correctly, should be ideal for your requirements.

Berrick · « **Reply #2 on:** August 07, 2013, 09:02:05 PM »

hehe,

thanks for the reply, already looked at those and are probably my first choice but was hoping to get something very cheap which I could tinker with

I am wondering if it may be better though to just by the vigor and be done with it especially after the problems I had trying to get the HH to work properly

burakkucat · « **Reply #3 on:** August 07, 2013, 10:38:47 PM »

If I was in your position, I would look on eBay for a Vigor 120.

But, ultimately, the decision is yours to make.

News:

Author Topic: Which Hardware to use as a bridge?? (Read 2406 times)

Berrick

Which Hardware to use as a bridge??

burakkucat

Re: Which Hardware to use as a bridge??

Berrick

Re: Which Hardware to use as a bridge??

burakkucat

Re: Which Hardware to use as a bridge??