Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bald_Eagle1]

I have tried a <0D> ending (on the assumption for the moment that Paul's compiled v1.0 is still using the .txt files in the app directory  ), but without success.  But I really need to retest slooowly. 
Perhaps my assumption is simply wrong

The compiled programs don't actually use the .txt files in the app directory, although they may have been included in the download file.

A completely different method of logging in is now used.

To avoid hi-jacking Eric's thread, I'll start a new one soon(ish) to (hopefully) get to the bottom of why the programs don't currently work with the HG622.

 

[snadge]

@ Eric - yes I would also like to thank you AGAIN - excellent work bud...long may it continue!

I can confirm the Bit-Swaps-Per-Minute to not continue to be logged after a re-sync as Ive just done it again, but...I had to restart the app as I accidentally opened a second running copy by clicking on the tray icon (as the shortcut is stored there..a la windows 7) and I now had 2 running and didnt know which was the one that had been running all day...unfortunately i close the wrong one (from the tray) without checking... what is it you want me to post exactly? you mentioned .." could you take a manual note of the values in the Bitswap: line of the Connection stats over a few samples" - sorta lost me there sorry.. the Bitswap values have now since renewed.

here is my previous sync values regarding interleave depth being pulled from different section of the stats by DMT Tool (352) than RS-W (96) - I would like to say since the re-sync ive just forced that both are now reporting 96...

G.dmt framing
K:              41(0)           16
R:              4               16
S:              1               8
D:              96              8
                        ADSL2 framing
MSGc:           96              15
B:              40              15
M:              1               8
T:              8               7
R:              4               16
S:              0.0785          3.6226
L:              4583            318
D:              352             8   

DMT Tool seems to pull the D value from ADSL2 Framing.

[roseway]

what is it you want me to post exactly? you mentioned .." could you take a manual note of the values in the Bitswap: line of the Connection stats over a few samples" - sorta lost me there sorry.. the Bitswap values have now since renewed.

I just wanted to confirm that the Bitswap data reported by the router was still incrementing normally when rs-x/w was showing zeros after the re-sync.

here is my previous sync values regarding interleave depth being pulled from different section of the stats by DMT Tool (352) than RS-W (96) - I would like to say since the re-sync ive just forced that both are now reporting 96...

G.dmt framing
K:              41(0)           16
R:              4               16
S:              1               8
D:              96              8
                        ADSL2 framing
MSGc:           96              15
B:              40              15
M:              1               8
T:              8               7
R:              4               16
S:              0.0785          3.6226
L:              4583            318
D:              352             8   

DMT Tool seems to pull the D value from ADSL2 Framing.

I missed a trick here - I hadn't realised that some routers report both G.dmt framing and ADSL2 framing, so I was just picking up the first instance of the line beginning D:   I'll sort it out.

[Update] Now sorted (I think, but I'm unable to test it)

[snadge]

Any idea why one is sometimes different from the other? (g. Dmt vs adsl2)

Sent from my Sony Xperia Miro on Tapatalk

[roseway]

No idea, I'm afraid. But it's not unreasonable to expect that the DSLAM/MSAN will have different configurations for the different protocols.

[ColinS]

Hi Eric,

A genuine facility request this time .... 

On the Bitswaps graphs, might it be possible at some point to put clickable boxes for displaying the US & DS values separately, i.e. one or the other or both as ticked. (When there's something in them that is! )

Sometimes, becuase the rates are low, it's hard to distinguish what's going on in one from the other.  And if you wanted to add a cycle (i.e. from US to DS to US to ...) then that would be too 8)  for words!

Thanks for giving it consideration.  Colin

[roseway]

That's a good suggestion, Colin. I'll endeavour to add it to the next version.

[Update] Now added to all the time-related graphs, apart from the connection speed graph, where the issue wouldn't seem to apply.

[rhohne]

RE: Max Attainable Speed
On occasions I notice multiple max attainable download lines. These usually occur prior to a change in sync speed. On this occasion it was when I was trying to reduce my noise margin on a HG622.

 

[roseway]

RE: Max Attainable Speed
On occasions I notice multiple max attainable download lines. These usually occur prior to a change in sync speed. On this occasion it was when I was trying to reduce my noise margin on a HG622.

Yes, I noticed this myself recently, when I had a couple of unexpected re-syncs. I think I've fixed it, and I'll test the solution shortly.

[Update] Now fixed.

[snadge]

I can also confirm ive seen those lines before but forgot too report it, I got rid by restarting the app

new version coming soon ??

is there any chance you can add the vendor id query result in somewhere please?

edit: also, a suggestion... do the QLN and HLOG graphs Y axis values have to go so low? the QLN goes down to -180dBm and the HLOG is -200dB, I dont know what the lowest QLN or HLOG can go but from some of the ones I've seen I would have thought -150 on QLN and -100 on HLOG may be suffice? I mean especially the HLOG as it looks like its a little squished up there at the top of the graph

[roseway]

new version coming soon ??

In the next day or two, depending on some tests I'm running.

is there any chance you can add the vendor id query result in somewhere please?

It's the first item on the Stats tab, or were you looking for something more?

do the QLN and HLOG graphs Y axis values have to go so low?

That's a fair point. I'll have a look at the scaling of those graphs when I can get a round tuit.

[kitz]

Another request please to think to adding to your expanding aroundtoit.

Is it possible to add an auto record button, ie its starts automatically recording stats say a minute after start up of the prog.    That way I could add RS-w to auto run on windows start up.


Thank you

[roseway]

Is it possible to add an auto record button, ie its starts automatically recording stats say a minute after start up of the prog.    That way I could add RS-w to auto run on windows start up.

It accepts the command-line parameter "startrecording" so if you start it with

Code: [Select]

rsw.exe startrecording
it will do what you're asking for.

Apart from this, adding autorecording as an option would be easy enough to implement, and I'll have a look at it.

[Update] Option added to the Misc section.

[snadge]

Yeah good suggestion by kitz, is it possible to have it Start in the tray so it can run hidden without bothering you

Sent from my Sony Xperia Miro on Tapatalk

[snadge]

Yeah good suggestion by kitz, is it possible to have it Start in the tray so it can run hidden without bothering you

Sent from my Sony Xperia Miro on Tapatalk