Download and had a look at it today, just to have a look at the interface - its looking very smart.
Unfortunately it doesnt work with my router (TG582n) which doesnt use any of the 3 supplied cmd options in the dropdown.
Ive been having a poke around the CLI to see what commands are available and got the following info if its any use to you
xdsl (200:20008)
- info (200:20008) , [expand 200:20008], [g.997.1 200:20008], [counter_peri
od_filter 200:20008], [counters_reset 200:20008]
- config (200:20008) , [adslmultimode 0], [detect-lop 200:20008], [syslog 200
:20008], [status 200:20008]
- maxspeed (200:20008) , [tx 200:20008], [rx 200:20008]
- version (200:20008)
xdsl debug (204:20008)
- bitloadinginfo (204:20008)
- deltconfig (204:20008) , [state 204:20008]
- deltinfo (204:20008)
- modemoptioninfo (204:20008)
- multimode (204:20008) , [config 204:20008]
- traceconfig (204:20008)
xdsl qual (200:20008)
- alb (200:20008)
- bitloadinginfo (200:20008)
- lov (200:20008) , [signal_type 200:20008]
- lcl (200:20008)
- mib (200:20008)
- qln (200:20008)
- aisf (200:20008)
- freeze-showtime (200:20008) , [state 200:20008]
xdsl info is very basic but the following command gives full line stats inc errors
{Administrator}=>xdsl info expand=enabledThe following command gives bit loading
{Administrator}[xdsl debug]=>bitloadinginfoIf you want to take it any further I can give you some sample outputs.