Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[beanieboy182]

this is from the cmd prompt

 %1 = C:\ADSL_Stats\Current_Stats\Current_Stats_20120805-1709\Plink_20120805-170
9.log

 ****************************************************************************

  Creating ADSL Connection Statistics Graphs - Version 3.2

  Using Data from:-

  C:\ADSL_Stats\Current_Stats\Current_Stats_20120805-1709\Plink_20120805-1709.lo
g

  Data obtained 05/08/12 17:09

 ****************************************************************************

 ************************************************************************
 * The ADSL Mode could not be determined from "adslctl info --stats" *
 * The data is either not present, or is unreadable                     *
 ************************************************************************

 Defaulting to produce graphs scaled for G.DMT Mode (256 Tones)


 The ADSL MODE was determined to be G.DMT


 Creating Bits-20120805-1709.png

multiplot> plot 'Bits.txt' using 1:($1>0 && $1<32 ? $2 : 1/0) w boxes lc 14 fs s
olid
                                                                               ^

           line 0: warning: Skipping data file with no valid points

multiplot> plot 'Bits.txt' using 1:($1>31 && $1<515 ? $2 : 1/0) w boxes lc 1 fs
solid

^
           line 0: warning: Skipping data file with no valid points
 Creating  SNR-20120805-1709.jpg

gnuplot> plot 'SNR.txt' w boxes fs solid
                                   ^
         line 0: warning: Skipping data file with no valid points
 Creating  QLN-20120805-1709.jpg

gnuplot> plot 'QLN.txt' w lines
                          ^
         line 0: warning: Skipping data file with no valid points
 Creating  Hlog-20120805-1709.jpg

gnuplot> plot 'Hlog.txt' w lines
                           ^
         line 0: warning: Skipping data file with no valid points
convert.exe: missing an image filename `stats-20120805-1709.jpg' @ error/convert
.c/ConvertImageCommand/3016.
convert.exe: missing an image filename `Counters-20120805-1709.jpg' @ error/conv
ert.c/ConvertImageCommand/3016.

 Creating Montage of:-
 Bits-20120805-1709.png
  SNR-20120805-1709.png
  QLN-20120805-1709.png
 Hlog-20120805-1709.png
montage.exe: unable to open image `stats-20120805-1709.jpg': No such file or dir
ectory @ error/blob.c/OpenBlob/2589.
montage.exe: unable to open image `Counters-20120805-1709.jpg': No such file or
directory @ error/blob.c/OpenBlob/2589.
montage.exe: unable to open image `stats-20120805-1709.jpg': No such file or dir
ectory @ error/blob.c/OpenBlob/2589.
montage.exe: unable to open image `Counters-20120805-1709.jpg': No such file or
directory @ error/blob.c/OpenBlob/2589.


Press any key to continue . . .

[beanieboy182]

im thinking about reloading the dgteam firmware but my router auto upgraded to 1.04 can i downgrade to 1.03 i think the latest dgteam firmware is 1.03 something
but wont that auto upgrade ?
GAH why will this script not work 

[rhohne]

Please could you attach a copy of Plink_20120805-1709.log after removing any sensitive information.

[beanieboy182]

=~=~=~=~=~=~=~=~=~=~=~= Plink log 2012.08.05 17:04:06 =~=~=~=~=~=~=~=~=~=~=~=
 
 login: admin
Password:
adsl info --linediag
^@
Login incorrect
 login:

[beanieboy182]

=~=~=~=~=~=~=~=~=~=~=~= Plink log 2012.08.05 17:09:09 =~=~=~=~=~=~=~=~=~=~=~=
 
 login: admin
Password:
adsl info --linediag
^@
Login incorrect
 login:

[beanieboy182]

this is why i asked if the telnet password and username were the same on the netgear firmware not skys and not dgteams
i have the dg834gt 1.04. something
username is admin
password is password
i just logged into it via another browser to check if it auto saved my password from ages ago before i changed it
and it came up with the login box
admin
password
and im in i can see all the router stats
but i have no clue why it says incorrect when using this script

the login1.txt is admin
and login2.txt is password

[rhohne]

Assuming that you can manually telnet in using the values entered into LOGIN1.TXT (admin) and LOGIN2.TXT (password) then I would suspect the line endings are incorrect. Please could you check the size of these files. Are they value length+1 or value length+2.

For the DGTEAM firmware they must have UNIX style line endings ie length+1, not to sure about the native firmware.

[beanieboy182]

i just tried to telnet to 192.168.2.1
and admin
password
said incorrect login
how is that possible
thats the password

[beanieboy182]

+ how would i check the value lengths
that confused me a bit

[rhohne]

Please can you confirm which firmware you are using.

I believe the latest netgear one is 1.03.23, but sky is 1.04.13, if the latter have you tried password of sky ?

File size can be determined from properties of file (right click on file and select properties) or from DIR command from a DOS box

[beanieboy182]

going to reload the proper dgteam firmware now have had enough

[beanieboy182]

whats the user name and password telnet for the dgteam firmware ?

[beanieboy182]

ok nvm
i am able to telnet to 192.168.2.1 with admin and password now
but still the script doesnt work for me
GRRR
tried it with a enter after the admin in login1.txt
and without and with both a enter after each lol
this is what i got

=~=~=~=~=~=~=~=~=~=~=~= Plink log 2012.08.05 20:47:40 =~=~=~=~=~=~=~=~=~=~=~=
 
Login: admin

Password:
password

adsl info --Bits

Login incorrect
Login: Password:
adsl info --linediag

adsl info --stats

Login incorrect
Login: Password:
exit

Login incorrect

[roseway]

It looks to me as though the login is failing and you are typing the command too soon, before the 'login incorrect' message is displayed.

With the standard Netgear firmware you have to enable debug mode before using telnet. With the DGTeam firmware there is an option to enable debug mode permanently. Have you got that option checked?

[beanieboy182]

ok its the login1.txt and login2.txt that is messing me up
how should they look ?
should they have a second line (as in u press enter after the admin or password)
im missing something
if i use

admin (enter to get a second line)

it looks better
like

login: admin

Password:

but if i put a enter after password in login2.txt it looks like this

login: admin

password:
password


:S