Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 16 17 [18] 19 20 21

Author Topic: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B  (Read 208002 times)

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #255 on: January 23, 2013, 04:04:49 PM »

lan 1 needs to be connected to your wan port for internet access, lan 2 needs to be connected to a lan port on your router to allow you to access the modem,  there's no way to do it via a single cable.

what happens on the newer eci modems, I been told only lan1 works, which I can access but the modme isnt connected to the line, when its connected to the line does it stop working?
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4300
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #256 on: January 23, 2013, 06:02:40 PM »

I've no idea, in the end I gave up and bought an older type already unlocked.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #257 on: January 24, 2013, 02:18:10 PM »

I've no idea, in the end I gave up and bought an older type already unlocked.

seems noone wants to sell the older ones anymore :(

check the other thread I posted an update, but I guess the situation is that one can either get the stats or use the net but not both at same time, and noone knows how to get the error stats on the newer ones.
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4300
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #258 on: January 24, 2013, 03:40:23 PM »

I think I have an older one, with the pins soldered in, but that I couldn't unlock if you're interested.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #259 on: January 24, 2013, 04:30:46 PM »

Would need to be pre unlocked, the ECI unlock procedure is over my head.

I am using the ECI I got now as I am fairly convinced it has a much lower crc error rate than the HG based on the lack of red specs on my tbb graph.  They both sync around the same speed.  The ECI reports lower attainable which I think is more accurate than the HG's attainable. As the HG reports a downstream attainable 2mbit higher than the actual sync even tho its a 6db margin.

edit

if you willing to send for postage fee I will take it, maybe I can somehow get it unlocked, thanks.
« Last Edit: January 24, 2013, 04:37:19 PM by Chrysalis »
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4300
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #260 on: January 24, 2013, 08:17:29 PM »

I think I'll put it on Ebay sometime, could do with getting some money back.
Logged
Formerly restrained by ECI and ali,  now surfing along at 390/36  ;D

liamstears

  • Member
  • **
  • Posts: 21
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #261 on: February 08, 2013, 09:04:35 PM »

I have the older model unlocked I would be willing to sell if the price is right...

I find I never really access the stats anyway and could just use my newer model and access stats now and again by switching the cable

EDIT: SOLD
« Last Edit: February 08, 2013, 11:11:11 PM by liamstears »
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #262 on: March 08, 2013, 03:55:33 AM »

I have now spend a little time 'playing' with this 'older' type ECI device, the V-2FUb/I.

I am uncertain if Bald_Eagle1 has any plans to port his statistics harvesting and graphing code to these devices but here is some food for thought --

Code: [Select]
[bcat@Duo2 ECI]$ telnet 192.168.1.254
Trying 192.168.1.254...
Connected to 192.168.1.254.
Escape character is '^]'.
login as: admin
password:

BusyBox v1.00 (2011.08.09-03:28+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

Alpha # echo help > /var/tmp/pipe/dsl_cpe0_cmd
Alpha # cat /var/tmp/pipe/dsl_cpe0_ack
   acog,          AutobootConfigOptionGet
   acos,          AutobootConfigOptionSet
   acs,           AutobootControlSet
   alf,           AutobootLoadFirmware
   asecg,         AutobootScriptExecuteConfigGet
   asecs,         AutobootScriptExecuteConfigSet
   asg,           AutobootStatusGet
   aufg,          AutobootUsedFirmwareGet
   alig,          AuxLineInventoryGet
   bbsg,          BandBorderStatusGet
   bpstg,         BandPlanSTatusGet
   bpsg,          BandPlanSupportGet
   dbgmlg,        DBG_ModuleLevelGet
   dbgmls,        DBG_ModuleLevelSet
   dms,           DeviceMessageSend
   esmcg,         EventStatusMaskConfigGet
   esmcs,         EventStatusMaskConfigSet
   fpsg,          FramingParameterStatusGet
   g997amdpfcg,   G997_AlarmMaskDataPathFailuresConfigGet
   g997amdpfcs,   G997_AlarmMaskDataPathFailuresConfigSet
   g997amlfcg,    G997_AlarmMaskLineFailuresConfigGet
   g997amlfcs,    G997_AlarmMaskLineFailuresConfigSet
   g997bang,      G997_BitAllocationNscGet
   g997bansg,     G997_BitAllocationNscShortGet
   g997cdrtcg,    G997_ChannelDataRateThresholdConfigGet
   g997cdrtcs,    G997_ChannelDataRateThresholdConfigSet
   g997csg,       G997_ChannelStatusGet
   g997dpfsg,     G997_DataPathFailuresStatusGet
   g997dfr,       G997_DeltFreeResources
   g997dhling,    G997_DeltHLINGet
   g997dhlinsg,   G997_DeltHLINScaleGet
   g997dhlogg,    G997_DeltHLOGGet
   g997dqlng,     G997_DeltQLNGet
   g997dsnrg,     G997_DeltSNRGet
   g997fpsg,      G997_FramingParameterStatusGet
   g997gang,      G997_GainAllocationNscGet
   g997gansg,     G997_GainAllocationNscShortGet
   g997lstg,      G997_LastStateTransmittedGet
   g997lacg,      G997_LineActivateConfigGet
   g997lacs,      G997_LineActivateConfigSet
   g997lfsg,      G997_LineFailureStatusGet
   g997lisg,      G997_LineInitStatusGet
   g997lig,       G997_LineInventoryGet
   g997listrg,    G997_LineInventorySTRingGet
   g997lis,       G997_LineInventorySet
   g997lsg,       G997_LineStatusGet
   g997lspbg,     G997_LineStatusPerBandGet
   g997ltsg,      G997_LineTransmissionStatusGet
   g997pmsft,     G997_PowerManagementStateForcedTrigger
   g997pmsg,      G997_PowerManagementStatusGet
   g997racg,      G997_RateAdaptationConfigGet
   g997racs,      G997_RateAdaptationConfigSet
   g997sang,      G997_SnrAllocationNscGet
   g997sansg,     G997_SnrAllocationNscShortGet
   g997xtusecg,   G997_XTUSystemEnablingConfigGet
   g997xtusecs,   G997_XTUSystemEnablingConfigSet
   g997xtusesg,   G997_XTUSystemEnablingStatusGet
   help,          Help
   ics,           InstanceControlSet
   isg,           InstanceStatusGet
   lecg,          LastExceptionCodesGet
   lfcg,          LineFeatureConfigGet
   lfcs,          LineFeatureConfigSet
   lfsg,          LineFeatureStatusGet
   locg,          LineOptionsConfigGet
   locs,          LineOptionsConfigSet
   lsg,           LineStateGet
   llcg,          LowLevelConfigurationGet
   llcs,          LowLevelConfigurationSet
   mlsg,          MiscLineStatusGet
   mfcg,          MultimodeFsmConfigGet
   mfcs,          MultimodeFsmConfigSet
   mfsg,          MultimodeFsmStatusGet
   nsecg,         NotificationScriptExecuteConfigGet
   nsecs,         NotificationScriptExecuteConfigSet
   pm15meet,      PM_15MinElapsedExtTrigger
   pmbms,         PM_BurninModeSet
   pmcc15mg,      PM_ChannelCounters15MinGet
   pmcc1dg,       PM_ChannelCounters1DayGet
   pmccsg,        PM_ChannelCountersShowtimeGet
   pmcctg,        PM_ChannelCountersTotalGet
   pmchs15mg,     PM_ChannelHistoryStats15MinGet
   pmchs1dg,      PM_ChannelHistoryStats1DayGet
   pmct15mg,      PM_ChannelThresholds15MinGet
   pmct15ms,      PM_ChannelThresholds15MinSet
   pmct1dg,       PM_ChannelThresholds1DayGet
   pmct1ds,       PM_ChannelThresholds1DaySet
   pmcg,          PM_ConfigGet
   pmcs,          PM_ConfigSet
   pmdpc15mg,     PM_DataPathCounters15MinGet
   pmdpc1dg,      PM_DataPathCounters1DayGet
   pmdpcsg,       PM_DataPathCountersShowtimeGet
   pmdpctg,       PM_DataPathCountersTotalGet
   pmdpfc15mg,    PM_DataPathFailureCounters15MinGet
   pmdpfc1dg,     PM_DataPathFailureCounters1DayGet
   pmdpfcsg,      PM_DataPathFailureCountersShowtimeGet
   pmdpfctg,      PM_DataPathFailureCountersTotalGet
   pmdpfhs15mg,   PM_DataPathFailureHistoryStats15MinGet
   pmdpfhs1dg,    PM_DataPathFailureHistoryStats1DayGet
   pmdphs15mg,    PM_DataPathHistoryStats15MinGet
   pmdphs1dg,     PM_DataPathHistoryStats1DayGet
   pmdpt15mg,     PM_DataPathThresholds15MinGet
   pmdpt15ms,     PM_DataPathThresholds15MinSet
   pmdpt1dg,      PM_DataPathThresholds1DayGet
   pmdpt1ds,      PM_DataPathThresholds1DaySet
   pmetr,         PM_ElapsedTimeReset
   pmlesc15mg,    PM_LineEventShowtimeCounters15MinGet
   pmlesc1dg,     PM_LineEventShowtimeCounters1DayGet
   pmlescsg,      PM_LineEventShowtimeCountersShowtimeGet
   pmlesctg,      PM_LineEventShowtimeCountersTotalGet
   pmleshs15mg,   PM_LineEventShowtimeHistoryStats15MinGet
   pmleshs1dg,    PM_LineEventShowtimeHistoryStats1DayGet
   pmlfc15mg,     PM_LineFailureCounters15MinGet
   pmlfc1dg,      PM_LineFailureCounters1DayGet
   pmlfcsg,       PM_LineFailureCountersShowtimeGet
   pmlfctg,       PM_LineFailureCountersTotalGet
   pmlfhs15mg,    PM_LineFailureHistoryStats15MinGet
   pmlfhs1dg,     PM_LineFailureHistoryStats1DayGet
   pmlic15mg,     PM_LineInitCounters15MinGet
   pmlic1dg,      PM_LineInitCounters1DayGet
   pmlicsg,       PM_LineInitCountersShowtimeGet
   pmlictg,       PM_LineInitCountersTotalGet
   pmlihs15mg,    PM_LineInitHistoryStats15MinGet
   pmlihs1dg,     PM_LineInitHistoryStats1DayGet
   pmlit15mg,     PM_LineInitThresholds15MinGet
   pmlit15ms,     PM_LineInitThresholds15MinSet
   pmlit1dg,      PM_LineInitThresholds1DayGet
   pmlit1ds,      PM_LineInitThresholds1DaySet
   pmlsc15mg,     PM_LineSecCounters15MinGet
   pmlsc1dg,      PM_LineSecCounters1DayGet
   pmlscsg,       PM_LineSecCountersShowtimeGet
   pmlsctg,       PM_LineSecCountersTotalGet
   pmlshs15mg,    PM_LineSecHistoryStats15MinGet
   pmlshs1dg,     PM_LineSecHistoryStats1DayGet
   pmlst15mg,     PM_LineSecThresholds15MinGet
   pmlst15ms,     PM_LineSecThresholds15MinSet
   pmlst1dg,      PM_LineSecThresholds1DayGet
   pmlst1ds,      PM_LineSecThresholds1DaySet
   pmrtc15mg,     PM_ReTxCounters15MinGet
   pmrtc1dg,      PM_ReTxCounters1DayGet
   pmrtcsg,       PM_ReTxCountersShowtimeGet
   pmrtctg,       PM_ReTxCountersTotalGet
   pmrths15mg,    PM_ReTxHistoryStats15MinGet
   pmrths1dg,     PM_ReTxHistoryStats1DayGet
   pmrtt15mg,     PM_ReTxThresholds15MinGet
   pmrtt15ms,     PM_ReTxThresholds15MinSet
   pmrtt1dg,      PM_ReTxThresholds1DayGet
   pmrtt1ds,      PM_ReTxThresholds1DaySet
   pmr,           PM_Reset
   pmsmg,         PM_SyncModeGet
   pmsms,         PM_SyncModeSet
   ptsg,          PilotTonesStatusGet
   quit,          Quit
   rccg,          RebootCriteriaConfigGet
   rccs,          RebootCriteriaConfigSet
   rusg,          ResourceUsageStatisticsGet
   se,            ScriptExecute
   sicg,          SystemInterfaceConfigGet
   sics,          SystemInterfaceConfigSet
   sisg,          SystemInterfaceStatusGet
   tmcs,          TestModeControlSet
   tmsg,          TestModeStatusGet
   vig,           VersionInformationGet
Alpha # echo help > /var/tmp/pipe/dsl_cpe1_cmd
Alpha # cat /var/tmp/pipe/dsl_cpe1_ack
   acog,          AutobootConfigOptionGet
   acos,          AutobootConfigOptionSet
   acs,           AutobootControlSet
   alf,           AutobootLoadFirmware
   asecg,         AutobootScriptExecuteConfigGet
   asecs,         AutobootScriptExecuteConfigSet
   asg,           AutobootStatusGet
   aufg,          AutobootUsedFirmwareGet
   alig,          AuxLineInventoryGet
   bbsg,          BandBorderStatusGet
   bpstg,         BandPlanSTatusGet
   bpsg,          BandPlanSupportGet
   dbgmlg,        DBG_ModuleLevelGet
   dbgmls,        DBG_ModuleLevelSet
   dms,           DeviceMessageSend
   esmcg,         EventStatusMaskConfigGet
   esmcs,         EventStatusMaskConfigSet
   fpsg,          FramingParameterStatusGet
   g997amdpfcg,   G997_AlarmMaskDataPathFailuresConfigGet
   g997amdpfcs,   G997_AlarmMaskDataPathFailuresConfigSet
   g997amlfcg,    G997_AlarmMaskLineFailuresConfigGet
   g997amlfcs,    G997_AlarmMaskLineFailuresConfigSet
   g997bang,      G997_BitAllocationNscGet
   g997bansg,     G997_BitAllocationNscShortGet
   g997cdrtcg,    G997_ChannelDataRateThresholdConfigGet
   g997cdrtcs,    G997_ChannelDataRateThresholdConfigSet
   g997csg,       G997_ChannelStatusGet
   g997dpfsg,     G997_DataPathFailuresStatusGet
   g997dfr,       G997_DeltFreeResources
   g997dhling,    G997_DeltHLINGet
   g997dhlinsg,   G997_DeltHLINScaleGet
   g997dhlogg,    G997_DeltHLOGGet
   g997dqlng,     G997_DeltQLNGet
   g997dsnrg,     G997_DeltSNRGet
   g997fpsg,      G997_FramingParameterStatusGet
   g997gang,      G997_GainAllocationNscGet
   g997gansg,     G997_GainAllocationNscShortGet
   g997lstg,      G997_LastStateTransmittedGet
   g997lacg,      G997_LineActivateConfigGet
   g997lacs,      G997_LineActivateConfigSet
   g997lfsg,      G997_LineFailureStatusGet
   g997lisg,      G997_LineInitStatusGet
   g997lig,       G997_LineInventoryGet
   g997listrg,    G997_LineInventorySTRingGet
   g997lis,       G997_LineInventorySet
   g997lsg,       G997_LineStatusGet
   g997lspbg,     G997_LineStatusPerBandGet
   g997ltsg,      G997_LineTransmissionStatusGet
   g997pmsft,     G997_PowerManagementStateForcedTrigger
   g997pmsg,      G997_PowerManagementStatusGet
   g997racg,      G997_RateAdaptationConfigGet
   g997racs,      G997_RateAdaptationConfigSet
   g997sang,      G997_SnrAllocationNscGet
   g997sansg,     G997_SnrAllocationNscShortGet
   g997xtusecg,   G997_XTUSystemEnablingConfigGet
   g997xtusecs,   G997_XTUSystemEnablingConfigSet
   g997xtusesg,   G997_XTUSystemEnablingStatusGet
   help,          Help
   ics,           InstanceControlSet
   isg,           InstanceStatusGet
   lecg,          LastExceptionCodesGet
   lfcg,          LineFeatureConfigGet
   lfcs,          LineFeatureConfigSet
   lfsg,          LineFeatureStatusGet
   locg,          LineOptionsConfigGet
   locs,          LineOptionsConfigSet
   lsg,           LineStateGet
   llcg,          LowLevelConfigurationGet
   llcs,          LowLevelConfigurationSet
   mlsg,          MiscLineStatusGet
   mfcg,          MultimodeFsmConfigGet
   mfcs,          MultimodeFsmConfigSet
   mfsg,          MultimodeFsmStatusGet
   nsecg,         NotificationScriptExecuteConfigGet
   nsecs,         NotificationScriptExecuteConfigSet
   pm15meet,      PM_15MinElapsedExtTrigger
   pmbms,         PM_BurninModeSet
   pmcc15mg,      PM_ChannelCounters15MinGet
   pmcc1dg,       PM_ChannelCounters1DayGet
   pmccsg,        PM_ChannelCountersShowtimeGet
   pmcctg,        PM_ChannelCountersTotalGet
   pmchs15mg,     PM_ChannelHistoryStats15MinGet
   pmchs1dg,      PM_ChannelHistoryStats1DayGet
   pmct15mg,      PM_ChannelThresholds15MinGet
   pmct15ms,      PM_ChannelThresholds15MinSet
   pmct1dg,       PM_ChannelThresholds1DayGet
   pmct1ds,       PM_ChannelThresholds1DaySet
   pmcg,          PM_ConfigGet
   pmcs,          PM_ConfigSet
   pmdpc15mg,     PM_DataPathCounters15MinGet
   pmdpc1dg,      PM_DataPathCounters1DayGet
   pmdpcsg,       PM_DataPathCountersShowtimeGet
   pmdpctg,       PM_DataPathCountersTotalGet
   pmdpfc15mg,    PM_DataPathFailureCounters15MinGet
   pmdpfc1dg,     PM_DataPathFailureCounters1DayGet
   pmdpfcsg,      PM_DataPathFailureCountersShowtimeGet
   pmdpfctg,      PM_DataPathFailureCountersTotalGet
   pmdpfhs15mg,   PM_DataPathFailureHistoryStats15MinGet
   pmdpfhs1dg,    PM_DataPathFailureHistoryStats1DayGet
   pmdphs15mg,    PM_DataPathHistoryStats15MinGet
   pmdphs1dg,     PM_DataPathHistoryStats1DayGet
   pmdpt15mg,     PM_DataPathThresholds15MinGet
   pmdpt15ms,     PM_DataPathThresholds15MinSet
   pmdpt1dg,      PM_DataPathThresholds1DayGet
   pmdpt1ds,      PM_DataPathThresholds1DaySet
   pmetr,         PM_ElapsedTimeReset
   pmlesc15mg,    PM_LineEventShowtimeCounters15MinGet
   pmlesc1dg,     PM_LineEventShowtimeCounters1DayGet
   pmlescsg,      PM_LineEventShowtimeCountersShowtimeGet
   pmlesctg,      PM_LineEventShowtimeCountersTotalGet
   pmleshs15mg,   PM_LineEventShowtimeHistoryStats15MinGet
   pmleshs1dg,    PM_LineEventShowtimeHistoryStats1DayGet
   pmlfc15mg,     PM_LineFailureCounters15MinGet
   pmlfc1dg,      PM_LineFailureCounters1DayGet
   pmlfcsg,       PM_LineFailureCountersShowtimeGet
   pmlfctg,       PM_LineFailureCountersTotalGet
   pmlfhs15mg,    PM_LineFailureHistoryStats15MinGet
   pmlfhs1dg,     PM_LineFailureHistoryStats1DayGet
   pmlic15mg,     PM_LineInitCounters15MinGet
   pmlic1dg,      PM_LineInitCounters1DayGet
   pmlicsg,       PM_LineInitCountersShowtimeGet
   pmlictg,       PM_LineInitCountersTotalGet
   pmlihs15mg,    PM_LineInitHistoryStats15MinGet
   pmlihs1dg,     PM_LineInitHistoryStats1DayGet
   pmlit15mg,     PM_LineInitThresholds15MinGet
   pmlit15ms,     PM_LineInitThresholds15MinSet
   pmlit1dg,      PM_LineInitThresholds1DayGet
   pmlit1ds,      PM_LineInitThresholds1DaySet
   pmlsc15mg,     PM_LineSecCounters15MinGet
   pmlsc1dg,      PM_LineSecCounters1DayGet
   pmlscsg,       PM_LineSecCountersShowtimeGet
   pmlsctg,       PM_LineSecCountersTotalGet
   pmlshs15mg,    PM_LineSecHistoryStats15MinGet
   pmlshs1dg,     PM_LineSecHistoryStats1DayGet
   pmlst15mg,     PM_LineSecThresholds15MinGet
   pmlst15ms,     PM_LineSecThresholds15MinSet
   pmlst1dg,      PM_LineSecThresholds1DayGet
   pmlst1ds,      PM_LineSecThresholds1DaySet
   pmrtc15mg,     PM_ReTxCounters15MinGet
   pmrtc1dg,      PM_ReTxCounters1DayGet
   pmrtcsg,       PM_ReTxCountersShowtimeGet
   pmrtctg,       PM_ReTxCountersTotalGet
   pmrths15mg,    PM_ReTxHistoryStats15MinGet
   pmrths1dg,     PM_ReTxHistoryStats1DayGet
   pmrtt15mg,     PM_ReTxThresholds15MinGet
   pmrtt15ms,     PM_ReTxThresholds15MinSet
   pmrtt1dg,      PM_ReTxThresholds1DayGet
   pmrtt1ds,      PM_ReTxThresholds1DaySet
   pmr,           PM_Reset
   pmsmg,         PM_SyncModeGet
   pmsms,         PM_SyncModeSet
   ptsg,          PilotTonesStatusGet
   quit,          Quit
   rccg,          RebootCriteriaConfigGet
   rccs,          RebootCriteriaConfigSet
   rusg,          ResourceUsageStatisticsGet
   se,            ScriptExecute
   sicg,          SystemInterfaceConfigGet
   sics,          SystemInterfaceConfigSet
   sisg,          SystemInterfaceStatusGet
   tmcs,          TestModeControlSet
   tmsg,          TestModeStatusGet
   vig,           VersionInformationGet
Alpha # exit
Connection closed by foreign host.
[bcat@Duo2 ECI]$

I am not sure if that 'help' list is identical to the one discovered by asbokid for the 'newer' type ECI device, the V-2FUb/r, but if it is, Bald_Eagle1 will be able to (eventually) support both ECI device types.  ;)
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

Bald_Eagle1

  • Helpful
  • Kitizen
  • *
  • Posts: 2721
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #263 on: March 08, 2013, 07:05:05 AM »

I am not sure if that 'help' list is identical to the one discovered by asbokid for the 'newer' type ECI device, the V-2FUb/r, but if it is, Bald_Eagle1 will be able to (eventually) support both ECI device types.  ;)

It would indeed be good to support these devices, but I have to say it's not something I will be working on in the immediate future.

If anyone was to write the code in plain old 'C' for converting the data from these devices into the same (or very similar) format as the xdslcmd data obtained from the Huawei HG612 modem, it would be a relatively easy/quick exercise for me to include that within the new HG612 programs' code.

 
Logged

soussss

  • Just arrived
  • *
  • Posts: 2
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #264 on: March 08, 2013, 08:41:00 PM »

hi to you all.
is there a simple way  for a newbie  how to unlock this modem . i have got the r version with two rubber feet ( two screws) soldered the three pin to board ready for usb .....................
i have downloaded the software for the usb and installed it but when i power the modem nothing pops up on the screen.
does the modem need to be connected to the router .............
i am not hi tech guy still learning thanks for your help
Logged

les-70

  • Kitizen
  • ****
  • Posts: 1254
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #265 on: March 10, 2013, 04:42:11 PM »

  Not sure I understand the problem but:-

1. You can check the USB to TTL etc is working by connecting RX to TX on the USB to TTL only and seeing if you get a character echo in a terminal,  e.g. putty, with settings as in the /r post. 

  You should then connect to the three pins to the TTL side of the USB adapter checking that you have GND correct by looking closely at the pics in the /r post. 

2.  Power up the modem first, wait a minute, THEN open the terminal and press return a few times. If there is no response try a fresh terminal session with the wires the other way round i.e. RX TX swapped over.

  I find it best to open a fresh terminal each time.  Once you have a connection you should see modem output at modem power up if you power down and up leaving the connected terminal window open.

  If the USB to TTL is working but all fails it may be a "soldering the pins fault".

    Good luck
Logged

HighBeta

  • Reg Member
  • ***
  • Posts: 175
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #266 on: March 21, 2013, 07:11:35 PM »

is there a simple way  for a newbie  how to unlock this modem .

Unfortunately both the versions of the ECI can be trouble some. Also there's  a big problem with "grey" pl2303 chips according to the prolific web site.[1]

Maybe to save time (and a few extra gray hairs) is to get an unlocked one off ebay* (unlocked "I" s don't come up often though)


----------------------------------------------------------------------------------------------------------------------
* http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=unlocked+eci&_sacat=0&_from=R40

[1] http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
« Last Edit: March 27, 2013, 07:13:15 PM by HighBeta »
Logged

asbokid

  • Kitizen
  • ****
  • Posts: 1286
    • Hacking the 2Wire
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #267 on: March 21, 2013, 10:39:02 PM »

Alternatives to the pl2303 include the cp2102, the ft232 and the ch341.

cheers, a
Logged

HighBeta

  • Reg Member
  • ***
  • Posts: 175
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #268 on: March 27, 2013, 07:45:50 PM »

Sometimes trying the "underside" pads might just work.

As asbokid highlights on page 15
Quote from: asbokid

Perhaps if you have the patience to try it again, maybe the pins could be clipped to the pads on the underside of the board. These are actually plated thru-holes, so there should still be continuity.
----------------------------------------------------------------------------------------------------------------------
If all else fails
The "well known" ebay  seller has dropped the price to below £20 on the "r" on the link *

* http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=unlocked+eci&_sacat=0&_from=R40
« Last Edit: March 29, 2013, 08:50:07 PM by HighBeta »
Logged

Chrysalis

  • Content Team
  • Addicted Kitizen
  • *
  • Posts: 7382
  • VM Gig1 - AAISP L2TP
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #269 on: March 27, 2013, 09:04:30 PM »

ok sad to report the telnetd locking still happens with manually killing btagent, I had my modem powered on in this room for over a week, tried telnet today and needed to reboot to access.

if I run top, there is an indication of whats wrong.

At first the process called autbtex was consuming all cpu power, I couldnt kill it, its unkillable.
Now that process is fighting with telnetd for all cpu power.
the modem has a load avg of over 4.xx just sitting idle on my lan.

so somethign is sucking up cpu power and I expect also sucking up resources probably eventually causing telnet to lockup.  The one process that is consistent is autbtex, telnet isnt constantly sucking up cpu power it goes idle after a bit of time.

I want to get an ECI running on my line now, as I am currently interleaved, last time I was it recovered in 2 days with prety much no errors, but it seems there is complications this time round, the hg lost sync about 2 hours ago (which is probably going to trash DLM recovery) and the only cause is I can see a short period of lower upload attainable (still above 20meg) which coincided with the resync, the modem actually synced higher than previous suggesting it was a very short issue that had gone by the time it had synced, so I want to see if ECI fixes these niggling issues as DLM is a pain.  But I am not keen plugging in a modem that has issues with processes sucking up all its cpu power whilst idle and a telnet that will lock me out after a few days.

My new ECI v1 seems to have been sent via a dodgy courier so I am not sure when I will get it now.
Logged
Pages: 1 ... 16 17 [18] 19 20 21
 

anything