Kitz ADSL Broadband Information
adsl spacer  
Support this site
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
   Glossary   Glossary
 
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: 1 ... 18 19 [20] 21

Author Topic: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B  (Read 216905 times)

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #285 on: September 23, 2013, 07:24:48 PM »
Quote from: richardh on September 23, 2013, 01:15:19 PM
You have been more than helpful  :)

<snip>

Thanks again burakkucat for lending a hand  :)

You're welcome.  ;)  Sorry the help was not that fulfilling.  :(

I always try to avoid causing damage with my paws . . .  ;D
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

uklad

  • Member
  • **
  • Posts: 55
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #286 on: October 13, 2013, 03:45:51 PM »
Where is asbokid at the moment need his help with somthing but ive lost his email :(
Logged

burakkucat

  • Respected
  • Senior Kitizen
  • *
  • Posts: 38300
  • Over the Rainbow Bridge
    • The ELRepo Project
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #287 on: October 14, 2013, 12:27:32 AM »
Precise location? I know not . . .  :no:

E-mail address? It's available almost everywhere!  ::)

For example, go to this page, scroll to the bottom of the right-hand panel and hover the cursor over / click on the 'asbokid' in the line that reads --

Quote
HuaweiHG612Hacking by asbokid is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
Logged
:cat:  100% Linux and, previously, Unix. Co-founder of the ELRepo Project.

Please consider making a donation to support the running of this site.

khile

  • Just arrived
  • *
  • Posts: 2
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #288 on: November 10, 2013, 10:03:18 AM »
Is this model hakable now as got fiber installed on thursday and really want to start hacking and flashing  :D
Logged

Ronski

  • Helpful
  • Kitizen
  • *
  • Posts: 4315
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #289 on: November 10, 2013, 10:59:49 AM »
You will be better off getting an Huawei  HG612 off eBay, much easier to unlock and there are programs available to monitor your connection.
Logged
Formerly restrained by ECI and ali,  now surfing along at 1147/105  ;D

custard

  • Member
  • **
  • Posts: 83
    • Geeky Dentist
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #290 on: March 30, 2014, 12:05:20 AM »
I've been using this modem unlocked for the last week. I'd like to confirm that telnet and the gui remain accessible if another router acting as a switch inbetween the modem and normal router is used.

I've tested various codes from the list posted earlier in the thread. My findings are that errors such as CRC, FEC and ES are reported although probably not always accurately.

I was going to show the outputs of each code I tested but was unable to do so as the modem could not handle being asked for multiple outputs simultaneously. Doing this caused me to lose telnet access and I don't want to reboot just yet.

So if anyone tries the codes below I would advise that they are done in batches of 6-8.

Code: [Select]
echo " bpstg" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " bbsg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " bbsg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " fpsg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " fpsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " g997amlfcg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " g997amlfcg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
echo " g997fpsg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997fpsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997lig 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997lig 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997listrg 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997listrg 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
 echo " g997lsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997lsg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997lspbg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " g997lspbg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " lfcg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " lfcg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " llcg" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc15mg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcc1dg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmccsg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcctg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmcctg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc15mg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpc1dg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpcsg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpctg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpctg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmdpfc15mg 0 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 0 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 1 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 1 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesc15mg 1 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo "pmlesc1dg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlescsg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesctg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlesctg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc15mg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfc1dg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 0 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 1 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfcsg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfctg 0" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlfctg 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 0 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 1 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 1 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc15mg 1 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 1 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 1 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsc1dg 1 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 0 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 0 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 1 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 1 1" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlscsg 1 2" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsctg 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmlsctg 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc15mg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc15mg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc15mg 0 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc1dg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc1dg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtc1dg 0 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtcsg 0 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtcsg 0 1 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtcsg 0 2 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " pmrtctg 0 " > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " rusg" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
echo " vig" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack   
Logged

Blackeagle

  • Reg Member
  • ***
  • Posts: 257
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #291 on: March 31, 2014, 03:43:14 PM »
Quote from: custard on March 30, 2014, 12:05:20 AM
I'd like to confirm that telnet and the gui remain accessible if another router acting as a switch inbetween the modem and normal router is used.

Few questions !!

a) Is that absolutely necessary ?  I have a spare switch I could use, but I will probably be breaking t&c's by doing so!
b) Am I likely to get locked out again by a firmware upgrade, as with the HG612?
 
Quote
My findings are that errors such as CRC, FEC and ES are reported although probably not always accurately.
c) Is this via the GUI or telnet ?  Also, what leads you to believe they are not always accurate ?
Logged
ASCII stupid question, get a stupid ANSI -- TalkTalk Broadband since 2006

custard

  • Member
  • **
  • Posts: 83
    • Geeky Dentist
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #292 on: March 31, 2014, 05:09:36 PM »


Quote from: Blackeagle on March 31, 2014, 03:43:14 PM
a) Is that absolutely necessary ?  I have a spare switch I could use, but I will probably be breaking t&c's by doing so!
I can't access the modem with WAN connected unless i use the above method.
Quote
b) Am I likely to get locked out again by a firmware upgrade, as with the HG612?
Possibly but i'd wait for someone more qualified to answer
 
Quote
c) Is this via the GUI or telnet ?  Also, what leads you to believe they are not always accurate ?
The FEC errors on both sometimes show a figure of about 49,000,0000 or something which is probably the threshold. I also have only seen HEC at 0.
Logged

HighBeta

  • Reg Member
  • ***
  • Posts: 175
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #293 on: March 31, 2014, 08:49:33 PM »
Thanks custard for the updates -useful info  :)
« Last Edit: April 01, 2014, 03:37:02 PM by HighBeta »
Logged

cederom

  • Just arrived
  • *
  • Posts: 1
  • - CeDeROM - THE FIRST CYBORG EVER -
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #294 on: February 20, 2015, 04:30:18 PM »
Can you please provide ARX CPU pinout for JTAG port (i.e. what pins on CPU are the JTAG signals)?
« Last Edit: February 20, 2015, 04:32:48 PM by cederom »
Logged

imap

  • Just arrived
  • *
  • Posts: 2
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #295 on: May 25, 2015, 09:01:25 PM »
Hi everyone.

Obtained ECI modem not long time ago after switch over to fiber. Not being happy with my other Huawei modem i thought maybe i can somehow, get this to work, and after searching net i've come across this post.

Currently i am half way through hacking this thing but i am getting strange serial output in terminal. Instead of readable characters i am getting ASCII characters. I cant get to the bottom of this. i have tested serial adaptor and seems to work fine. It echoes character to terminal and works well with microcontroller.
Is it maybe setting in hyperterminal whats buggered?

I appreciate any help and will answer any question best to my ability.

Thanks.

Logged

kitz

  • Administrator
  • Senior Kitizen
  • *
  • Posts: 34012
  • Trinity: Most guys do.
    • http://www.kitz.co.uk
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #296 on: May 25, 2015, 09:18:58 PM »
Hi and welcome to the forums  ^-^

Im afraid its way over my head when it comes to hacking the ECI so I'll leave that to the other guys would may hopefully be able to help you.   


I would however be interested in any results such as line stats in comparison to the Huawei if you do manage to get it working :) 
Logged
Please do not PM me with queries for broadband help as I may not be able to respond.
-----
How to get your router line stats :: ADSL Exchange Checker

currytop

  • Reg Member
  • ***
  • Posts: 114
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #297 on: May 25, 2015, 09:51:20 PM »
Check serial terminal emulator is set to 115,200 baud, no flow control, no parity.

Steve
Logged

imap

  • Just arrived
  • *
  • Posts: 2
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #298 on: May 27, 2015, 08:35:03 PM »
Quote from: currytop on May 25, 2015, 09:51:20 PM
Check serial terminal emulator is set to 115,200 baud, no flow control, no parity.



I have changed settings and got no difference in output until i connected rx wire. lol

Thanks!
« Last Edit: May 27, 2015, 08:38:04 PM by imap »
Logged

IBulti

  • Just arrived
  • *
  • Posts: 1
Re: Hacking the ECI model B-FOCuS V-2FUb/I Rev.B
« Reply #299 on: June 09, 2015, 06:26:06 PM »
Hi,

I have been trying to use the information you have kindly provided on the web/forums but I seem to have run into a hicup.
I have set my serial port to 115200 8 bit 1 stop with no flow or parity.
Although I have tried several speed settings all I get is gobble gook

»¿åëW«V©öVjìÛUÚ

               ºô
                 ú»´Ôjjú»Ô*ª
                            ªtô{ë¶öÖ­ëë+뤫MQÑ£¤aöõºê*¶«övöìûööööûööÖöÛ+ëå#[5
¿#w==
»¿åëW«V©öVjìÛUÚ

               ºô
                 ú»´Ôjjú»Ô*ª
                            ªtô{ë¶öÖ­ëë+뤫MQÑ£¤aöõºê*¶«övöìûööööûööÖöÛ+ëå#[5
¿#w==
»¿
  ºô
    ú»´Ôjjú»Ô*ª
               ªtô{ë¶öÖ­ëë+뤫MQÑ£¤aöõºê*¶«övöìûööööûööÖöÛ+ëå#[5
¿#w==
»¿åëW«V©öVjìÛUÚ

               ºô
                 ú»´Ôjjú»Ô*ª
                            ªtô{ë¶öÖ­ëë+뤫MQÑ£¤aöõºê*¶«övöìûööö
Where am I going wrong?
I am using PUTTY as the terminal program as Win 8.1 does not seem to have Hyper Terminal.

Thanks
Logged
Pages: 1 ... 18 19 [20] 21
« previous next »
 

anything