Kitz Forum
Computers & Hardware => Networking => Topic started by: BritBrat on March 11, 2010, 09:01:55 AM
-
Anyone know how to use this VPN option?
What I would like to do is hide my IP using router settings so that my whole LAN would be using VPN.
I am right now using a VPN setup through XP network connections but this is only on one computer.
So is it posible to set up the whole LAN via the router?
At the moment I would need an idiots guide :)
-
VPN to where and what software is at that end?
There must be a "host" end somewhere and that will dictate what type of client you can use.
-
At the moment I am using "YourPrivateVPN"
http://www.yourprivatevpn.com
Can I use my account with several computers?
Yes. If you configure your router in such a way that it establishes the VPN connection directly, then all computers attached to it are protected. This is possible e.g. with Fritzbox or DD-WRT.
So I wanted to know if I can do it with the DG834GT.
-
That service says it supports PPTP, which is pretty common for VPN's, so if the new DGTeam firmware supports PPTP it should be pretty simple.
Time to read the DGTeam release notes, or install it and investigate the options?
-
There's a VPN configuration section in the new DGTeam firmware. I don't know anything about the subject, but it seems to cover what you want to do.
-
That service says it supports PPTP, which is pretty common for VPN's, so if the new DGTeam firmware supports PPTP it should be pretty simple.
Time to read the DGTeam release notes, or install it and investigate the options?
The DGTEAM FIRMWARE CHANGELOG (http://dgteam.ilbello.com/index.php?pid=18) mentions PPTP updated to version 1.72