Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: Kestral1981 on March 18, 2022, 03:54:02 PM

Title: Draytek Vigor 166 configure for G.Fast
Post by: Kestral1981 on March 18, 2022, 03:54:02 PM

Please can someone help me?

I am trying to configure a Draytek Vigor 166 for a G.Fast connection and I cannot find anything to help me. The provider won't help because they do not support "3rd party routers" and I have searched high and low online to find a guide. This is what I have done so far, but I have no guide to confirm if this is right or wrong:

Operation Mode:
Router Mode
PPPoE
DHCP enabled

Internet Access > General Setup:
WAN 1
DSL Mode - G.Fast only
DSL Modem code - Default
VDSL2/G.Fast- Customer
Enable
Tag Value - 101
Priority - 0
VDSL2/ G.Fast - Service
Enable
Tag Value - 101
Priority - 0

Internet Access > PPPoE/PPPoA > ISP Access Setup:
I have entered the G.Fast username and password credentials

Is this right? Please can someone help?

Title: Re: Draytek Vigor 166 configure for G.Fast
Post by: burakkucat on March 18, 2022, 04:24:14 PM

Welcome to the kitz forum.  :)

Just one question, for now: Who is your service provider?

There is a "Draytek Vigor 166 G.fast Modem / Router Review (https://forum.kitz.co.uk/index.php?topic=25203.0)" topic, originating from September 2020, that you might like to examine.

Title: Re: Draytek Vigor 166 configure for G.Fast
Post by: hushcoden on March 18, 2022, 04:43:05 PM

I use mine just as modem, I've attached the WAN config, hope it helps.

I'm with Pulse8, that is TTB.

Title: Re: Draytek Vigor 166 configure for G.Fast
Post by: Kestral1981 on March 21, 2022, 02:27:57 PM

Thank you both. The service provider is Gamma

Title: Re: Draytek Vigor 166 configure for G.Fast
Post by: meritez on March 21, 2022, 02:43:27 PM

Quote from: Kestral1981 on March 21, 2022, 02:27:57 PM

Thank you both. The service provider is Gamma

Which would make your G.Fast either BT Wholesale or TalkTalk Business Wholesale.

Can you see sync?