Kitz Forum
Broadband Related => ADSL Issues => Topic started by: tickmike on November 27, 2006, 10:51:08 PM
-
Hi All .
How do I find out what my Target SNR margin is set to in the DSLAM ?
Regards Michael.
-
Unless your router is able to tell you I dont think you can.
-
Force a resync e.g. by rebooting your router, then immediately see what your SNR is. That's the best way.
-
Hi Kitz,Chris.
I was playing about with the DMT tool earlier and had to do a reboot to 'factory default' and I think I remember 7db .
So would it be set at 9db, don't it go up 6,9,12 etc.
Michael.