Kitz Forum

Broadband Related => ADSL Issues => Topic started by: angelooo-18 on March 05, 2021, 01:56:37 AM

Title: Want to improve the downstream quality line.
Post by: angelooo-18 on March 05, 2021, 01:56:37 AM

Hello friends, I have a ZTE H108L ADSL modem, I been reading a little bit od post in this forum and an another sites to improve my quality line, i have already this configuration made by me in my autoexec.net file:
__________________________
wan dmt2 set olr 2
wan dmt2 set olr 1
wan dmt2 set SRACrc 1              (configs made by me)
wan dmt2 set tcm on
wan dmt aoc bitswap on on
w dmt2 db tlb 10
___________________________
sys stdio 5
sys autocwmp off
sys cfg web 2
wan dmt2 set largeD 2
ether driver etherppp on
w tsarm txpri off
w dmt eoc dyingasp off         (modem default config)
w dmt2 set lpr off
wan dmt2 set olr 2
ip igmp proxy 1
ip dns sendall on
w ghs set multi 5 3
ip tcp mss 512
ip rip activate
sys wdog sw on
sys quick enable
----------------------

i wanted to know what another commands i can do to improve my 10mbps plan speed and the quality of the line.
My adsl details is:

SNR Margin: 11.1db(down)           20.7db(up)
Line Attenuation: 21.4db(down)   15.0   db(up)
Data Rate: 11776kbps(down)   1278   kbps(up)

hope anyone can help me  ::) :fingers:

Title: Re: Want to improve the downstream quality line.
Post by: burakkucat on March 05, 2021, 10:15:13 PM

Welcome to the kitz forum.  :)

Unfortunately I do not know the ZTE H108L modem. Perhaps other members might be able to comment?

Title: Re: Want to improve the downstream quality line.
Post by: angelooo-18 on March 07, 2021, 01:07:44 AM

I hope so   :fingers: :fingers:

Title: Re: Want to improve the downstream quality line.
Post by: Weaver on March 08, 2021, 12:09:23 AM

Welcome to the forum!  ;D