Kitz Forum
Broadband Related => Broadband Technology => Topic started by: neil on December 10, 2020, 03:08:16 PM
-
I have a question.
Is it possible to run 2 lines on a single modem? In the modem stats for xdsl why there are two paths path0 and path1.
is it possible to combine two lines in a single connection?
-
These are different types of ‘applications’ different sorts of traffic with different requirements, but there is still just the one physical line. The first chapter or so explains all: https://www.itu.int/rec/T-REC-G.992.3/en (https://www.itu.int/rec/T-REC-G.992.3/en)
Interleaved path and fast path may be where you have seen these terms used. Also ‘bearer 1’.
-
I have a question.
Is it possible to run 2 lines on a single modem? In the modem stats for xdsl why there are two paths path0 and path1.
is it possible to combine two lines in a single connection?
Yes there are modems that can do this.
Some modems have 2 x rj11 DSL sockets.
Some other modems have a single rj11 socket but with 4 active pins instead of the standard 2. With these modems you wire both incoming pairs to a single rj11 connector.
I think there might be some fritzbox's that do this.
I'm not sure if such modems only work with xDSL bonding or will run 2 independent circuits. It's not something I've looked in to much.