Kitz Forum

Broadband Related => FTTC and FTTP Issues => Topic started by: sof006 on April 14, 2020, 10:34:00 AM

Title: Interleaving, how long is it likely to last?
Post by: sof006 on April 14, 2020, 10:34:00 AM
So this is purely my fault so i'm to blame here.

Yesterday I spent a good few hours mucking about with my Vigor 130 and during those times when changing settings its asked to be rebooted. I suspect that those reboots have caused my line to become interleaved and also a drop in speed. P.S I would like to add I did decided to try the SNR trick yesterday (which saw increased download speeds) and it didn't cause significant errors on my line so I don't think thats relevant but just as a precaution I removed any modified settings and put them back to defaults.

 ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 61358000 bps   US Actual Rate       : 19993000 bps
   DS Attainable Rate      : 71631752 bps   US Attainable Rate   : 20890197 bps
   DS Path Mode            :  Interleave    US Path Mode         :  Interleave
   DS Interleave Depth     :      895       US Interleave Depth  :      253
   NE Current Attenuation  :       12 dB    Cur SNR Margin       :        6  dB
   DS actual PSD           :     3. 1 dB    US actual PSD        :     3. 3  dB
   NE CRC Count            :        0       FE CRC Count         :     2263
   NE ES Count             :        0       FE  ES Count         :     1895
   Xdsl Reset Times        :        0       Xdsl Link  Times     :        5
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-09-0F-01-07   [with Vectoring support]
   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :       12 dB    Far SNR Margin       :        6  dB
   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >
> 

Looking at this, interleave depth isn't too high... so fingers crossed?
Title: Re: Interleaving, how long is it likely to last?
Post by: mrk26 on April 14, 2020, 10:36:51 AM
Your line is interleaved on booth downstream and upstream, so it may take a while before you back on fastpath.
Title: Re: Interleaving, how long is it likely to last?
Post by: sof006 on April 14, 2020, 10:37:47 AM
Quote from: mrk26 on April 14, 2020, 10:36:51 AM
Your line is interleaved on booth downstream and upstream, so it may take a while before you back on fastpath.

How long is a while, if you're to guess?
Title: Re: Interleaving, how long is it likely to last?
Post by: mrk26 on April 14, 2020, 10:47:07 AM
If you don't do nothing to it it's between a week for first positive action up to several weeks/months. There is a lot of examples on this forum, even thread below yours https://forum.kitz.co.uk/index.php/topic,24069.0.html (https://forum.kitz.co.uk/index.php/topic,24069.0.html).
Title: Re: Interleaving, how long is it likely to last?
Post by: sof006 on April 14, 2020, 10:50:40 AM
Quote from: mrk26 on April 14, 2020, 10:47:07 AM
If you don't do nothing to it it's between a week for first positive action up to several weeks/months. There is a lot of examples on this forum, even thread below yours https://forum.kitz.co.uk/index.php/topic,24069.0.html (https://forum.kitz.co.uk/index.php/topic,24069.0.html).

Ouch okay, hopefully its only a week then  :fingers:
Title: Re: Interleaving, how long is it likely to last?
Post by: sof006 on April 17, 2020, 01:26:35 PM
Looks like my interleaving changed back to fast in only a couple days. Got lucky this time!