Kitz Forum
Broadband Related => Broadband Technology => Topic started by: adslmax on August 23, 2019, 11:53:24 AM
-
Can anyones tell me why is bearer 0 get sync rate of 80/20 but bearer 1 get no sync rate of 0/0 (are these future of possible dual band sync together like 2 x 80/20 make it 160/40?)
Max: Upstream rate = 24458 Kbps, Downstream rate = 89818 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps (maybe future dual band sync ?)
I also notice extra addition on k10 (dBx100 below in red highlights):
xdslctl info --pbParams
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24458 Kbps, Downstream rate = 89818 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 24458 kbps 89818 kbps
Actual Aggregate Tx Power: 2.1 dBm 12.4 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 2.2 13.9 23.2 N/A N/A 7.2 17.3 28.8
Signal Attenuation(dB): 2.2 13.1 22.1 N/A N/A 9.5 17.1 28.8
SNR Margin(dB): 12.9 9.6 11.3 N/A N/A 7.9 8.0 7.8
TX Power(dBm): -12.6 -29.4 2.1 N/A N/A 8.1 7.8 7.1
kl0(dBx100): 650 700 N/A N/A N/A 552 665 730
-
Isn't this just for G.INP or vectoring
-
Bearer 1 carries all the overhead messages, not just G.INP related stuff either.
You can't just double speeds by adding another bearer.
-
Bearer 1 carries all the overhead messages, not just G.INP related stuff either.
You can't just double speeds by adding another bearer.
G.INP and vectoring?