Kitz Forum
Broadband Related => FTTC and FTTP Issues => Topic started by: JordanBlack68 on June 23, 2019, 10:07:39 AM
-
Hi,
I switched from BT to Plusnet and the sync went down quite a bit, any idea?
BT
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25572 Kbps, Downstream rate = 84056 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 4.0 14.4
Attn(dB): 13.9 0.0
Pwr(dBm): 13.2 4.4
VDSL2 framing
Bearer 0
MSGc: -6 26
B: 130 237
M: 1 1
T: 0 42
R: 8 16
S: 0.0518 0.3781
L: 21468 5374
D: 16 1
I: 139 127
N: 139 254
Q: 16 0
V: 14 0
RxQueue: 60 0
TxQueue: 20 0
G.INP Framing: 18 0
G.INP lookback: 20 0
RRC bits: 0 24
Bearer 1
MSGc: 186 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 5.3333 0.0000
L: 48 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 3416266
OHFErr: 3 1467
RS: 4289148176 2189156
RSCorr: 1753652 9173
RSUnCorr: 0 0
Bearer 1
OHF: 125135190 0
OHFErr: 0 0
RS: 1501621541 0
RSCorr: 510 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 1949339 0
rtx_c: 12194 0
rtx_uc: 16 0
G.INP Counters
LEFTRS: 139 0
minEFTR: 79982 0
errFreeBits: 2452631821 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 4282991261 0
Data Cells: 1184929770 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 1 1103
SES: 0 0
UAS: 25 25
AS: 2010048
Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 3.98
OR: 0.01 64.22
AgR: 80614.82 20063.54
Bearer 1
INP: 4.00 0.00
INPRein: 4.00 0.00
delay: 3 0
PER: 16.06 0.01
OR: 95.62 0.01
AgR: 95.62 0.01
Bitswap: 743905/743905 832/832
Plusnet
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 26117 Kbps, Downstream rate = 74536 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 75058 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.3 15.0
Attn(dB): 13.9 0.0
Pwr(dBm): 13.2 5.2
VDSL2 framing
Bearer 0
MSGc: -6 26
B: 243 237
M: 1 1
T: 0 42
R: 10 16
S: 0.1035 0.3781
L: 19630 5374
D: 8 1
I: 254 127
N: 254 254
Q: 8 0
V: 0 0
RxQueue: 60 0
TxQueue: 20 0
G.INP Framing: 18 0
G.INP lookback: 20 0
RRC bits: 0 24
Bearer 1
MSGc: 154 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 6.4000 0.0000
L: 40 0
D: 3 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 764767
OHFErr: 0 1
RS: 116821328 2041257
RSCorr: 108 6
RSUnCorr: 0 0
Bearer 1
OHF: 189011 0
OHFErr: 0 0
RS: 1889494 0
RSCorr: 0 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 1949695 0
rtx_c: 6 0
rtx_uc: 0 0
G.INP Counters
LEFTRS: 0 0
minEFTR: 75061 0
errFreeBits: 3476028 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 438186957 0
Data Cells: 63961260 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 0 1
SES: 0 0
UAS: 23 23
AS: 3037
Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 3.98
OR: 0.01 64.22
AgR: 75135.16 20063.54
Bearer 1
INP: 4.50 0.00
INPRein: 4.50 0.00
delay: 3 0
PER: 16.06 0.01
OR: 79.68 0.01
AgR: 79.68 0.01
Bitswap: 1161/1161 0/0
-
Changing providers causes a DLM reset, so no G.inp and 6dB SNR target.
You can see in your BT data that you had an SNR of 4, in the PN data it's 6.
It will take sometime, but you will most likely get the speed back in stages, could be days, could be weeks or sometimes longer.
-
Changing providers causes a DLM reset, so no G.inp and 6dB SNR target.
You can see in your BT data that you had an SNR of 4, in the PN data it's 6.
It will take sometime, but you will most likely get the speed back in stages, could be days, could be weeks or sometimes longer.
Yeah thought that, happy with the speed though, always had lag on BT and its solved on Plusnet.
-
:)
-
Sync is back to normal, 79999/19999 and no lagging as well!
-
Hopefully no gremlins will decide to meddle with your circuit. ;)