Kitz Forum

Broadband Related => Router Monitoring Software => Topic started by: vultura on February 20, 2019, 07:18:10 PM

Title: HG612 Stats - Recommended Settings?
Post by: vultura on February 20, 2019, 07:18:10 PM

Asking just in case I switch back to the old HG612 as it seems to sync higher than the Zyxel I have installed currently.

Title: Re: HG612 Stats - Recommended Settings?
Post by: Ronski on February 20, 2019, 07:29:53 PM

Not sure quite what your asking for, recommended settings for the modem or for the HG612 stats collection software?

Title: Re: HG612 Stats - Recommended Settings?
Post by: vultura on February 20, 2019, 07:49:30 PM

Quote from: Ronski on February 20, 2019, 07:29:53 PM

Not sure quite what your asking for, recommended settings for the modem or for the HG612 stats collection software?

Sorry for not being clear, I meant the monitoring software.

Title: Re: HG612 Stats - Recommended Settings?
Post by: Ronski on February 20, 2019, 09:24:39 PM

Depending on the speed of the PC it's running on you may have to adjust the 'PC Speed' on the additional settings tab. I have mine set to create snapshot graphs every 12hours at midday and midnight, daily grahping at 23:58. Can't think of much else, and if I'm honest I hardly ever look at the graphs, may just look in every now and again to see when the last resync was - only use it on the works connection now as have Virgin at home.

Title: Re: HG612 Stats - Recommended Settings?
Post by: vultura on February 20, 2019, 09:32:24 PM

Thanks for reply Ronski and information as to how you have it set.

I had it running before, but it stopped logging for some reason.

Will go for a clean install to avoid issues.

Title: Re: HG612 Stats - Recommended Settings?
Post by: Ronski on February 20, 2019, 10:12:06 PM

Most common cause of it stopping logging is a stuck stats collection process - HG612_Stats.exe.

If you need any help just ask and I'll help where I can.