Kitz Forum
Broadband Related => FTTC and FTTP Issues => Topic started by: cwaite on June 16, 2018, 10:36:20 AM
-
Over the past few weeks I have noticed my SNR has risen and my attanable rate has gone down from around 34mbps to 31 mbps, then yesterday around 11am I noticed an Openreach engineer working down a couple of manholes (ones that my cable runs through) then at around 3:45pm I noticed a large drop in SNR along with a large drop in Attanable rate to around 26mbps, does anyone have any ideas what would cause this.
I have put a link below to my HG612 Stats
https://1drv.ms/f/s!AuuoQtRhe-fgoJRqMdSF7KYmFj02Ug
-
sounds like a new subscriber causing cross talk perhaps against your line.
-
Blimey I didnt think crosstalk would cause that much of a dip in the attainable rate.
-
Unfortunately it can be a bit of a killer. People have been known to see 20mb drop from a crosstalker
-
Your line absolutely baffles me cwaite
Your back on the Huawei cabinet again.
That's at least 3 times I've seen you swap from ECI to Huawei to ECI to Huawei.
At least you're back on the Huawei cabinet now.
I agree that it looks like crosstalk.
It actually sound like a neighbouring line has had a pair swap from a pair that wasn't affecting you to 1 which is.
-
I am not sure why I have changed to different equiptment, I have always been on the same cabinet, is it possible they have both ECI and Huawei in my local cabinet?
Also how can you tell from my stats whether I am ECI or Huawei?
-
Apologies after looking through the search function seems I'm mixing your username with the user cwave (very similar usernames).
:no:
So far they have gone ECI > Huawei > ECI
I mixed up the usernames and saw your G.INP and thought the cabinet type was changed again.