Kitz Forum
Broadband Related => FTTC and FTTP Issues => Topic started by: GigabitEthernet on August 18, 2017, 01:00:12 PM
-
Is it still only possible to get the current IP profile, by running the BT Wholesale speed test?
-
Yes.
You can work it out from your sync rate.
It's 96.79% of the connection rate without G.INP and 96.69% with G.INP enabled (I think)
-
the exact ratio is on kitz wiki somewhere but I am tired at the moment so sorry, what lee has stated seems close tho to what I remember :)
-
Alternatively if you're with Zen you should be able to get it from the 'Line Data' section on the customer portal.
-
I may have an issue then. My downstream sync speed is 54997 Kbps and my IP profile as reported by the BT Wholesale speed tester is only 50.93 Mbps.
-
Is it still only possible to get the current IP profile, by running the BT Wholesale speed test?
not exactly, this will run it for you https://windows.mouselike.org/be/index.asp?DoAction=BrasChecker
-
Is your snr margin lower than 6?
-
You don't have a problem. The I.P profile drops to roughly 91% of sync when retransmission high is set. retransmission low is about 96%.
I can't remember the exact figures. I do recall you saying G.INP increased some of its parameters so does sound like you are on retransmission high.
-
Cheers john
-
Ah that makes sense then. Thank you Sir.
-
My Max obtain is 41.5 but im only synced at 35mb on a 6.4db downstream :/