Kitz Forum

Broadband Related => Router Monitoring Software => Topic started by: NewtronStar on January 30, 2017, 07:15:32 PM

Title: CRC to Errored second converter
Post by: NewtronStar on January 30, 2017, 07:15:32 PM

All I have on the current Modem GUI are CRC's and FEC's is there away to convert CRC to Errored Seconds just to get some idea and yes I understand these change depending if your on fastpath, interleaved or with g.inp

Title: Re: CRC to Errored second converter
Post by: ejs on January 30, 2017, 07:47:00 PM

There is no way, they're not convertible.

An Errored Second is a second containing one or more CRC errors (or various other errors).

It would required a stats monitoring program to record the CRC count at 1-second intervals.

Title: Re: CRC to Errored second converter
Post by: Chrysalis on January 30, 2017, 08:27:44 PM

yep e.g. if you have 200 CRC.

you dont know if its made up of 200 x 1 ES or a single ES with 200 CRC errors.

Title: Re: CRC to Errored second converter
Post by: NewtronStar on January 30, 2017, 08:46:42 PM

That is a pity have had 1933 CRC's in two hours after the last PPPoE event and since a DLM reset was issued today most likely on fastpath at the moment.