Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: dcag44 on January 27, 2017, 06:23:46 PM
-
Hi just installed Openwrt on my TP-Link TD-W9980 using the Web Interface Hack (Install openWRT without opening the case) as shown here, https://wiki.openwrt.org/toh/tp-link/td-w9980 (https://wiki.openwrt.org/toh/tp-link/td-w9980) finally flashed router but i have become stuck installing the DSL Drivers i have followed the instructions, i have installed the BIN file that went fine downloaded the relevent firmware but its saying its not the correct image file. (https://forum.kitz.co.uk/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff8%2Fdavidgibson72%2Fdsl%2520firmware_zpsqdjvktjk.jpg&hash=aaec0a9e043b96d834a39730c6429a77920f0b5f)
Also i have Noticed in the Openwrt Web Interface under the Network Tab Wifi is missing is this because the DSL Drivers are not installed. (https://forum.kitz.co.uk/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff8%2Fdavidgibson72%2Fwifi%2520missing_zpsg0ffizdn.jpg&hash=85461ced93d776d1365375c34e536e7e75dbbec0)
Details of router system (Please Note listing TD-W8970 Because the firmware is for that Model)
(https://forum.kitz.co.uk/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff8%2Fdavidgibson72%2Fopenwrt%2520system_zps1paqzorz.jpg&hash=3465aa3b49e4901eb7ec48c6da0860d00f3884e0)
Any help would be Appreciated
Cheers