Kitz Forum
Broadband Related => FTTC and FTTP Issues => Topic started by: adnylee on May 19, 2016, 10:54:19 PM
-
Hi, I just got hold of a HG612 , unlocked tonight .
I used to connect my HH5 to the extension socket , i have connected the HG612 in bridge mode to the master socket tonight, but still cant achieve higher than 27M speed :(
I am completely new to vdsl connection stats, tried to learned some basics but still couldnt understand why my speed is so low. could someone kindly help to take a look?
thanks a lot
xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21263 Kbps, Downstream rate = 50056 Kbps
Bearer: 0, Upstream rate = 7200 Kbps, Downstream rate = 27398 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 11.9 16.6
Attn(dB): 15.4 0.0
Pwr(dBm): 12.6 6.0
VDSL2 framing
Bearer 0
MSGc: 36 118
B: 31 222
M: 1 1
T: 64 17
R: 10 16
S: 0.0371 0.9836
L: 9056 1952
D: 877 1
I: 42 120
N: 42 240
Counters
Bearer 0
OHF: 280498 59997
OHFErr: 3463 1
RS: 107604821 4078543
RSCorr: 563356 3261
RSUnCorr: 786252 0
Bearer 0
HEC: 141196 0
OCD: 5640 0
LCD: 5640 0
Total Cells: 52511627 0
Data Cells: 1100660 0
Drop Cells: 0
Bit Errors: 0 0
ES: 17 1
SES: 14 0
UAS: 23 23
AS: 1004
Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 3.57 16.78
OR: 93.96 59.09
AgR: 27491.84 7259.11
Bitswap: 744/744 21/21
[Moderator edited to wrap the statistics in [code][/code] tags to aid viewing (and copying).]
-
DLM may have banded the connection speed, in response to multiple disconnections. It takes a few days for DLM to remove the banding.
-
Welcome to the Kitz forum. :)
Just like as you have done for the xdslcmd info --stats command, will you please also obtain the output produced by the following commands and then post it here --
- xdslcmd info --pbParams
- xdslcmd info --vendor
- xdslcmd info --vectoring
- xdslcmd --version
- equipcmd swversion display
Sight of all of the above will answer a number of questions that one of our resident experts may ask . . . ;)
-
thank you guys.
I did a bt broadband online check and reported the slow speed yesterday and it showed there's some fault. The online fault tracker showed that it has been fixed today, and i noticed the broadband connection restarted around 2pm this afternoon.
I have ordered an Asus RT87u and set everything up about 2 hours ago. here are the output from the hg612. i am still on about 27M DL and 7M UL.
thanks again !
*********************************************************************************
equipcmd swversion display
software version: V100R001C01B030SP08
xdsl firmware version: A2pv6C038m.d24j
cpu version: BCM6368
cfe version: 1.0.37-102.6
display version success#
*********************************************************************************
*********************************************************************************
xdslcmd --version
xdslcmd version 1.0
DSL PHY: AnnexA version - A2pv6C038m.d24j
******* Pass *********
*********************************************************************************
*********************************************************************************
xdslcmd info --vectoring
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21421 Kbps, Downstream rate = 50168 Kbps
Bearer: 0, Upstream rate = 7200 Kbps, Downstream rate = 27398 Kbps
Vectoring state: 5
VCE MAC Address: 0:0:0:0:0:0
Total error samples Ethernet pkts sent: 0
Total error samples Ethernet pkts discarded: 0
Total error samples statuses sent: 0
Total error samples statuses discarded: 0
*********************************************************************************
*********************************************************************************
xdslcmd info --vendor
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21507 Kbps, Downstream rate = 50168 Kbps
Bearer: 0, Upstream rate = 7200 Kbps, Downstream rate = 27398 Kbps
ChipSet Vendor Id: BDCM:0xa48c
ChipSet VersionNumber: 0xa48c
ChipSet SerialNumber:
*********************************************************************************
*********************************************************************************
xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21522 Kbps, Downstream rate = 50172 Kbps
Bearer: 0, Upstream rate = 7200 Kbps, Downstream rate = 27398 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 21522 kbps 50172 kbps
Actual Aggregate Tx Power: 6.1 dBm 12.6 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 3.7 20.5 29.1 N/A N/A 10.5 22.5 36.2
Signal Attenuation(dB): 3.7 20.9 28.7 N/A N/A 13.8 22.2 36.3
SNR Margin(dB): 16.7 6.7 16.7 N/A N/A 11.8 11.8 11.8
TX Power(dBm): -9.3 25.4 6.0 N/A N/A 8.4 8.1 6.6
*********************************************************************************
*********************************************************************************
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21492 Kbps, Downstream rate = 50168 Kbps
Bearer: 0, Upstream rate = 7200 Kbps, Downstream rate = 27398 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 11.8 16.7
Attn(dB): 15.4 0.0
Pwr(dBm): 12.6 6.1
VDSL2 framing
Bearer 0
MSGc: 36 118
B: 31 222
M: 1 1
T: 64 17
R: 10 16
S: 0.0371 0.9836
L: 9056 1952
D: 877 1
I: 42 120
N: 42 240
Counters
Bearer 0
OHF: 2034255 435051
OHFErr: 4 7
RS: 781047684 3804328
RSCorr: 8315 10
RSUnCorr: 30 0
Bearer 0
HEC: 3 0
OCD: 1 0
LCD: 1 0
Total Cells: 382783373 0
Data Cells: 3663717 0
Drop Cells: 0
Bit Errors: 0 0
ES: 2 7
SES: 0 0
UAS: 39 39
AS: 7274
Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 3.57 16.78
OR: 93.96 59.09
AgR: 27491.84 7259.11
Bitswap: 5212/5212 7/8
Total time = 2 hours 1 min 53 sec
FEC: 8315 10
CRC: 4 7
ES: 2 7
SES: 0 0
UAS: 39 39
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 1 min 53 sec
FEC: 10 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 129 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 2 hours 1 min 53 sec
FEC: 8315 10
CRC: 4 7
ES: 2 7
SES: 0 0
UAS: 39 39
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 2 hours 1 min 13 sec
FEC: 8315 10
CRC: 4 7
ES: 2 7
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#
*********************************************************************************
[Moderator edited to wrap all statistics blocks in [code][/code] tags.]
-
Thank you for posting that information.
I can see that you are connected via a Huawei equipped cabinet and, currently, G.Inp is not applied to your circuit. As your SNRM is currently 11.8/16.7 dB DS/US it seems as if your circuit has been banded by the DLM. Your best course of action would be to leave the circuit alone -- don't disconnect or re-boot the modem, try to leave it undisturbed. All being well and assuming the fault (what ever it was) has truly been fixed, the DLM should relent and gradually make beneficial changes to the circuit.
Perhaps one of our more knowledgeable members will also take a look at the information and offer their interpretation of what can be seen? :-\
-
Thank you very much!
will keep everything connected 24/7 and see if there would be any improvement in the coming days/weeks
-
Perhaps one of our more knowledgeable members will also take a look at the information and offer their interpretation of what can be seen? :-\
Slow to this one, but I agree with what you've put.
Looking at the few errors that have accumulated over two hours, you'd expect DLM to not be /too/ interested in the line. However, I note with caution that (as a consequence of the apparent banding) the line is running with an SNRM of nearly 12dB. With such a high margin (and low speed), you'd expect there to be very few errors.
If DLM reduces its intervention on the banding (so increasing the speed), the SNRM will decrease, and the error rate will likely increase. We can only watch to see what happens.
@adnylee
Be aware that once DLM has intervened to add interleaving and FEC (as has happened on your line), modems have a habit of over-estimating the maximum attainable speed. If DLM reduces its level of intervention, your speed might not get as high as the 50Mbps that the modem currently reports.
-
I have set up the DSLStats, and looks like DSL connection has been reset early this morning, and the speed is slightly better
Max: Upstream rate = 21497 Kbps, Downstream rate = 50696 Kbps
Bearer: 0, Upstream rate = 8496 Kbps, Downstream rate = 29999 Kbps
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 21441 Kbps, Downstream rate = 50696 Kbps
Bearer: 0, Upstream rate = 8496 Kbps, Downstream rate = 29999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 13.4 15.4
Attn(dB): 15.4 0.0
Pwr(dBm): 12.4 6.2
VDSL2 framing
Bearer 0
MSGc: -6 90
B: 154 236
M: 1 1
T: 0 20
R: 16 16
S: 0.1640 0.8869
L: 8340 2291
D: 16 1
I: 171 127
N: 171 254
Q: 16 0
V: 8 0
RxQueue: 18 0
TxQueue: 9 0
G.INP Framing: 18 0
G.INP lookback: 9 0
RRC bits: 0 24
Bearer 1
MSGc: 90 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 10.6667 0.0000
L: 24 0
D: 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 448514
OHFErr: 0 47
RS: 1367490512 441162
RSCorr: 10721 109
RSUnCorr: 0 0
Bearer 1
OHF: 3504871 0
OHFErr: 0 0
RS: 21028856 0
RSCorr: 10 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 8489456 0
rtx_c: 227 0
rtx_uc: 0 0
G.INP Counters
LEFTRS: 5 0
minEFTR: 29993 0
errFreeBits: 25727689 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 3247800983 0
Data Cells: 12617511 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 22 112
SES: 11 0
UAS: 74 63
AS: 56298
Bearer 0
INP: 44.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 13.35
OR: 0.01 57.50
AgR: 30120.93 8553.32
Bearer 1
INP: 2.50 0.00
INPRein: 2.50 0.00
delay: 0 0
PER: 16.06 0.01
OR: 47.81 0.01
AgR: 47.81 0.01
Bitswap: 25167/25167 26/26
Total time = 1 days 3 hours 57 sec
FEC: 384409 501
CRC: 2795 223
ES: 22 112
SES: 11 0
UAS: 74 63
LOS: 1 0
LOF: 10 0
LOM: 0 0
Latest 15 minutes time = 57 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 72 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 3 hours 57 sec
FEC: 4011 77
CRC: 0 35
ES: 0 16
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 70786 171
CRC: 2764 75
ES: 13 28
SES: 11 0
UAS: 35 24
LOS: 1 0
LOF: 10 0
LOM: 0 0
Since Link time = 15 hours 38 min 17 sec
FEC: 10721 109
CRC: 0 47
ES: 0 27
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#
xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 21463 Kbps, Downstream rate = 50484 Kbps
Bearer: 0, Upstream rate = 8496 Kbps, Downstream rate = 29999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Discovery Phase (Initial) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
Medley Phase (Final) Band Plan
US: (7,32) (871,1205) (1972,2782)
DS: (33,859) (1216,1961) (2793,3970)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 21463 kbps 50484 kbps
Actual Aggregate Tx Power: 6.2 dBm 12.4 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 3.7 20.6 29.1 N/A N/A 10.4 22.5 36.4
Signal Attenuation(dB): 3.7 20.8 28.8 N/A N/A 13.7 22.2 36.4
SNR Margin(dB): 15.5 15.4 15.4 N/A N/A 13.4 13.4 13.4
TX Power(dBm): -9.1 -24.9 6.1 N/A N/A 8.2 7.7 7.1
#
xdslcmd info --vectoring
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 21463 Kbps, Downstream rate = 50696 Kbps
Bearer: 0, Upstream rate = 8496 Kbps, Downstream rate = 29999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Vectoring state: 5
VCE MAC Address: 0:0:0:0:0:0
Total error samples Ethernet pkts sent: 0
Total error samples Ethernet pkts discarded: 0
Total error samples statuses sent: 0
Total error samples statuses discarded: 0
#
G.INP Summary
Downstream Upstream
General
rtx_tx 8489456 0
rtx_c 227 0
rtx_uc 0 0
LEFTRS 5 0
minEFTR 29993 0
errFreeBits 25755109 0
Bearer 0
RxQueue 18 0
TxQueue 9 0
G.INP Framing 18 0
G.INP Lookback 9 0
RRC Bits 0 24
Interleave depth 16 1
INP 44.00 0.00
INPRein 0.00 0.00
Delay 0 0
Bearer 1
Interleave depth 1 0
INP 2.50 0.00
INPRein 2.50 0.00
Delay 0 0
Average error rates for 24 may 2016
CRC erors per hour: 129 Down, 2.25 Up
FEC erors per hour: 646 Down, 5.15 Up
HEC erors per hour: 0 Down, 0 Up
ES per hour: 0.52 Down, 1.31 Up
SES per hour: 0 Down, 0 Up
[Moderator edited to wrap all statistics blocks in [code][/code] tags.]
-
On the face of it, it looks like DLM has altered intervention, so as to remove the old-style (heavy) FEC+interleaving, and turned on G.INP retransmission (with very light FEC+interleaving) and, as happens often, your line's capabilities have improved.
However, it seems to have kept the banding, but increased the speed thresholds.
There's more room for improvement...
-
its getting better again today , but very tiny step each time?
32.4 DL /10 UL now
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 21467 Kbps, Downstream rate = 51356 Kbps
Bearer: 0, Upstream rate = 9999 Kbps, Downstream rate = 32400 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 12.8 14.4
Attn(dB): 15.4 0.0
Pwr(dBm): 12.6 6.2
VDSL2 framing
Bearer 0
MSGc: -6 58
B: 170 236
M: 1 1
T: 0 23
R: 16 16
S: 0.1679 0.7543
L: 8912 2694
D: 16 1
I: 187 127
N: 187 254
Q: 16 0
V: 4 0
RxQueue: 18 0
TxQueue: 9 0
G.INP Framing: 18 0
G.INP lookback: 9 0
RRC bits: 0 24
Bearer 1
MSGc: 90 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 10.6667 0.0000
L: 24 0
D: 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 783292
OHFErr: 0 22
RS: 957659024 3506982
RSCorr: 4516 55
RSUnCorr: 0 0
Bearer 1
OHF: 2511875 0
OHFErr: 0 0
RS: 15070880 0
RSCorr: 4 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 8489942 0
rtx_c: 705 0
rtx_uc: 14447 0
G.INP Counters
LEFTRS: 26 0
minEFTR: 32408 0
errFreeBits: 187233833 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 2513870853 0
Data Cells: 5105543 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 33 187
SES: 22 0
UAS: 108 86
AS: 40348
Bearer 0
INP: 45.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 8.70
OR: 0.01 58.79
AgR: 32471.06 10057.90
Bearer 1
INP: 2.50 0.00
INPRein: 2.50 0.00
delay: 0 0
PER: 16.06 0.01
OR: 47.81 0.01
AgR: 47.81 0.01
Bitswap: 18984/18984 25/25
Total time = 1 days 1 hours 26 min 28 sec
FEC: 411615 740
CRC: 3352 315
ES: 33 187
SES: 22 0
UAS: 108 86
LOS: 2 0
LOF: 19 0
LOM: 0 0
Latest 15 minutes time = 11 min 28 sec
FEC: 164 0
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 70 0
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 1 hours 26 min 28 sec
FEC: 805 7
CRC: 0 3
ES: 0 3
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 14160 163
CRC: 557 61
ES: 11 45
SES: 11 0
UAS: 34 23
LOS: 1 0
LOF: 9 0
LOM: 0 0
Since Link time = 11 hours 12 min 27 sec
FEC: 4516 55
CRC: 0 22
ES: 0 22
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#
[Moderator edited to wrap all statistics blocks in [code][/code] tags.]
-
There's a thread from earlier this year...
http://forum.kitz.co.uk/index.php/topic,16804.msg310813.html#msg310813
It includes a repaired line, whose banding improved in leaps of 2.4Mbps or 2.6Mbps. Little steps, too.
That line stopped improving, so we'll just have to see where yours goes.
-
resented again an hour and 40 minutes ago
35 UL / 10 DL now
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 1
Last initialization procedure status: 0
Max: Upstream rate = 21602 Kbps, Downstream rate = 50156 Kbps
Bearer: 0, Upstream rate = 9999 Kbps, Downstream rate = 34999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 11.6 14.5
Attn(dB): 15.4 0.0
Pwr(dBm): 12.7 6.4
VDSL2 framing
Bearer 0
MSGc: -6 58
B: 170 236
M: 1 1
T: 0 23
R: 12 16
S: 0.1554 0.7543
L: 9421 2694
D: 16 1
I: 183 127
N: 183 254
Q: 16 0
V: 4 0
RxQueue: 20 0
TxQueue: 10 0
G.INP Framing: 18 0
G.INP lookback: 10 0
RRC bits: 0 24
Bearer 1
MSGc: 90 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 10.6667 0.0000
L: 24 0
D: 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0
Counters
Bearer 0
OHF: 0 714618
OHFErr: 0 4
RS: 158892816 2798344
RSCorr: 531 3
RSUnCorr: 0 0
Bearer 1
OHF: 385867 0
OHFErr: 0 0
RS: 2314833 0
RSCorr: 2 0
RSUnCorr: 0 0
Retransmit Counters
rtx_tx: 8490514 0
rtx_c: 1260 0
rtx_uc: 28272 0
G.INP Counters
LEFTRS: 48 0
minEFTR: 35006 0
errFreeBits: 420094377 0
Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 417117243 0
Data Cells: 7083404 0
Drop Cells: 0
Bit Errors: 0 0
Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0
ES: 43 243
SES: 32 0
UAS: 142 110
AS: 6198
Bearer 0
INP: 47.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 8.70
OR: 0.01 58.79
AgR: 35075.90 10057.90
Bearer 1
INP: 2.50 0.00
INPRein: 2.50 0.00
delay: 0 0
PER: 16.06 0.01
OR: 47.81 0.01
AgR: 47.81 0.01
Bitswap: 2927/2927 2/2
Total time = 1 days 14 hours 35 min 23 sec
FEC: 450829 1139
CRC: 3898 437
ES: 43 243
SES: 32 0
UAS: 142 110
LOS: 3 0
LOF: 27 0
LOM: 0 0
Latest 15 minutes time = 5 min 23 sec
FEC: 71 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 67 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 14 hours 35 min 23 sec
FEC: 7450 249
CRC: 546 64
ES: 10 27
SES: 10 0
UAS: 34 24
LOS: 1 0
LOF: 8 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 32569 157
CRC: 0 61
ES: 0 32
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 1 hours 43 min 17 sec
FEC: 531 3
CRC: 0 4
ES: 0 4
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#
[Moderator edited to wrap all statistics blocks in [code][/code] tags.]
-
As you are using the HG612 and DSLStats already, perhaps worth uploading your stats to https://www.mydslwebstats.co.uk/
-
i have set the mywebdslstats up, but got the following error msg
Unable to upload MyDSLWebStats data ("upload" executable missing?)
-
There should be a file called 'upload.exe' (if you use Windows) or 'upload' otherwise, in the same folder as the other dslstats files from the downloaded archive.
-
i do have the upload15.exe
-
The other thing which can cause that error message is when the program is unable to write a temporary file which is part of the upload process. The DSLstats files must be extracted to a folder where you have unrestricted read/write access as an ordinary user. For example, MDWS uploads will fail if the files are extracted to the top level of C:\. I suggest that you move them to a suitable user folder.
-
I m running a windows 98 virtual machine, used to run from the desktop, now moved to C:\Download\ then got error msg related to 'curl.exe' missing normaliz.dll, copy the dll file over, everything works!
-
I'm pleased it works. Windows 98 indeed :)
-
Thanks Guys!
So far no more re-sync since last time which was more than 2 days .
I have another question, which is not related to VDSL. I have my HG612 & ASUS RT-AC87U connected to the BT master socket in the storage cupboard, the ASUS RT-AC87U runs quite hot, I would like to move it outside of the cupboard, just wondering if the AV1200 Powerline Adapter would work between HG612 & Router.
-
powerline will work so long as its the same ring main, but not at all recommended because of the noise they cause, which can severely affect vdsl circuits.
-
thanks.
it has been 6 days since last re-snyc.
speed stays at 35M DL / 10M UL on infinity 1 52M :(