Kitz Forum
Internet => General Internet => Topic started by: renluop on April 21, 2015, 08:00:46 PM
-
DSLStats reports under connection speed: max and bearer 0, ine about 1000 Kbps higher than the other.
Whilst I was out enjoying the sun DSLStats recorded a period when the max rate fluctuated several times almost closing in on the bearer 0, but without affect to that.
Why would the max's behaviour not affect bearer 0 ( sync) speed?
-
The Bearer 0 (sync) speed will change only if there is a resync. The Max speed varies as the SNRM varies.
-
Thanks for explanation.