Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: AArdvark on March 13, 2015, 10:59:58 PM
-
I cannot connect to plusnet using my zyxel.
I want to try the hg612 I have but have reset the config and lost the right settings.
I need to see what I have set wrong.
I am posting this via my phone so navigating kitz is slow and error prone with crappy internet access.
Anyone who can post a working config file set up for plusnet fibre would be a life saver.
At the moment plusnet are having access problems so I need to see if the problem is the zyxel or plusnet.
TIA
-
It will depend upon whether you intend to use the HG612 as a pure bridge modem or as a modem/router.
For the former, the default configuration is correct. (A long 20 - 30 seconds push and hold of the reset button will do the deed.) :)
I do not know of the required configuration for the latter. :(
-
Thanks, it was the long reset I did which is the wrong default setup. I will check the modem only setup on kitz and see what I have to change. (Now for some interneting on a phone with a crap mobile signal .........) 😫😫
Sorted, I found the backup config file I saved and restored the file.
All working.