Kitz Forum
Broadband Related => Router Monitoring Software => Topic started by: konrado5 on October 31, 2014, 11:23:21 PM
-
If I set monitoring every second I see very much bitswaps per minute.
Best regards
konrado5
-
Then set it to sample every 1 minute your going to overload your router setting it to sample every second ;)
-
You're not going to get sensible results with only one second between samples. Apart from overloading the modem, it's unlikely that sampling will complete within 1 second, so the next sample will conflict with the one which is still running.
-
CRC errors are sampled correctly if I set "Per sample" instead "Per minute".