Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: adslmax on September 14, 2014, 02:12:27 PM

Title: TD-W9980 v HG612
Post by: adslmax on September 14, 2014, 02:12:27 PM

Code: [Select]

2014.09.14 14:05:31 xDSL Stats:
[1,0,0,0,0,0]0
status=Up
modulationType=VDSL2
X_TPLINK_CurrSupportLinkType=2
lineEncoding=
allowedProfiles=
currentProfile=
dataPath=
interleaveDepth=0
lineNumber=0
upstreamCurrRate=19999
downstreamCurrRate=79995
upstreamMaxRate=33727
downstreamMaxRate=98293
upstreamNoiseMargin=149
downstreamNoiseMargin=114
upstreamAttenuation=127
downstreamAttenuation=113
upstreamPower=124
downstreamPower=2
ATURVendor=
ATURCountry=
ATUCVendor=
ATUCCountry=
totalStart=184421
showtimeStart=340
quarterHourStart=0
X_TPLINK_Bitswap=On
X_TPLINK_SRA=On
X_TPLINK_AdslModulationCfg=VDSL2
X_TPLINK_AnnexType=Annex A
X_TPLINK_SupportAdslMode=VDSL2:A,B,A/B;T1.413:A;G.dmt:A;ADSL2:A,A/L/M;ADSL2+:A,M,A/L/M;Auto Sync-up:A/B/L/M
X_TPLINK_PtmMainIfName=ptm0
[2,0,0,0,0,0]1
receiveBlocks=0
transmitBlocks=0
cellDelin=0
linkRetrain=0
initErrors=0
initTimeouts=0
lossOfFraming=0
erroredSecs=0
X_TPLINK_US_ErroredSecs=0
severelyErroredSecs=0
X_TPLINK_US_SeverelyErroredSecs=0
FECErrors=2970
ATUCFECErrors=540
HECErrors=0
ATUCHECErrors=0
CRCErrors=161
ATUCCRCErrors=44
[3,0,0,0,0,0]1
receiveBlocks=0
transmitBlocks=0
cellDelin=0
linkRetrain=0
initErrors=0
initTimeouts=0
lossOfFraming=0
erroredSecs=0
X_TPLINK_US_ErroredSecs=0
severelyErroredSecs=0
X_TPLINK_US_SeverelyErroredSecs=0
FECErrors=2970
ATUCFECErrors=540
HECErrors=0
ATUCHECErrors=0
CRCErrors=161
ATUCCRCErrors=44
[error]0



Today:
FECErrors=2970
ATUCFECErrors=540
HECErrors=0
ATUCHECErrors=0
CRCErrors=161
ATUCCRCErrors=44

Yesterday:
FECErrors=2305
ATUCFECErrors=296
HECErrors=0
ATUCHECErrors=0
CRCErrors=123
ATUCCRCErrors=25

seem not bad at all but in my experience that BTOpenreach Modem HG612 is less errors in 38 days below:

[attachment deleted by admin]

Title: Re: TD-W9980 v HG612
Post by: kitz on September 14, 2014, 03:07:23 PM

Im going to move the above post out as its not really relevant to this thread about the TD-W8970.

Title: Re: TD-W9980 v HG612
Post by: adslmax on September 14, 2014, 03:47:33 PM

I just now revert back to BT Openreach Modem and Netgear DGND3700v2 same as before. Because TP Link W9980 cause lower SNR and less max rate and more errors. Don't want DLM to strike anytime if I stay with TP Link. So, my TP Link is going back to broadbandbuyer for full refunded.

Can see below openreach modem rise more max rate, more snr and less error to start off just 15 minutes ago.