Kitz Forum
Broadband Related => Router Monitoring Software => Topic started by: roseway on September 05, 2012, 11:11:31 AM
-
No new features here, just bugfixes and tidying-up relating to comments on v0.8:
- the timer for the sample rate is now accurate to about 20 milliseconds
- fixed incorrect negative value shown for tone 0 on SNR per tone graph
- bitloading graph is now rescaled when SNR per tone exceeds 50 dB fixed in next version
- fixed wrong DSL uptime shown with some routers fixed in next version
- pbParams tab is now hidden for ADSL connections
- fixed blank autosaved snapshots
- fixed "Invalid floating point operation" error when saving a snapshot in some circumstances
- QLN and HLog graphs now blank sections where invalid data is supplied by the router, and try to
take account of differences between Huawei and ECI DSLAMs
- time stamp on Bitloading chart is fixed at the time of the most recent sample
https://docs.google.com/folder/d/0BxbUtOYVZ_SCZ1BnY3RKYnN2b1U/edit
-
Installed and running, all OK except the DSL connection uptime is still blank. Do you need a copy of the telnet data again for my D-Link DSL-2740B?
Stuart
PS. A couple of interface issues, re-sizing the whole window causes the graph to resize and overlay the Take Snapshot button to varying degrees and the bottom line of Tone Details box does not show completely even at start of program.
-
Installed and running, all OK except the DSL connection uptime is still blank. Do you need a copy of the telnet data again for my D-Link DSL-2740B?
No thanks, it's still there in your earlier posting. I'll look at this again.
PS. A couple of interface issues, re-sizing the whole window causes the graph to resize and overlay the Take Snapshot button to varying degrees and the bottom line of Tone Details box does not show completely even at start of program.
Sorry, I'll check it out.
-
Dear Roseway,
Have you thought of pulling additional line data via the diagnostic interface (the diagd daemon)? It would single out your software as something really unique.
cheers, a
-
Have you thought of pulling additional line data via the diagnostic interface (the diagd daemon)? It would single out your software as something really unique.
I haven't currently thought of it because I wouldn't even know where to start. But I'll put it on the list as something to think about.
-
RSW & DG834GT
Like broadstairs the connection time is not displayed.
The resizing overlay problem I can not replicate, instead if the GUI is resized so that the graph is not visible then the program hangs - just checked earlier versions and it happens with them as well.
-
RSW & DG834GT
Like broadstairs the connection time is not displayed.
The resizing overlay problem I can not replicate, instead if the GUI is resized so that the graph is not visible then the program hangs - just checked earlier versions and it happens with them as well.
So it does! I'll put limits on how small the window can be resized.
I've sorted the connection time issue now. I'm using the 'AS' line in the telnet stats to get the uptime, and this line is presented slightly differently in different routers.