Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: dizzy4528 on November 06, 2008, 08:14:37 PM

Title: DMT tool and netgear DG834GT saving settings
Post by: dizzy4528 on November 06, 2008, 08:14:37 PM

Quick question , if i force a SNR reduction using DMT tool to say 9db from 12 db ,i am assuming this is 75% on the slider scale,then apply and resync .
Will the setting be lost when i turn off my PC or is the setting stored in the router till it reboots.

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: roseway on November 06, 2008, 11:12:31 PM

Hi and welcome

The DG834GT doesn't store these settings permanently, so the changes will be lost if you reboot the router, but if you leave the router switched on you can reboot the PC without losing the settings.

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: dizzy4528 on November 07, 2008, 05:17:06 AM

 Cheers, quick and straight to the point.
 :)

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: roseway on November 07, 2008, 07:20:30 AM

:)

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: orainsear on November 10, 2008, 06:01:09 PM

Doesn't the DGTeam custom firmware maintain tweaked settings (SNR margin etc) after a power cycle of the router?

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: HPsauce on November 10, 2008, 06:07:32 PM

It does.

Title: Re: DMT tool and netgear DG834GT saving settings
Post by: mr_chris on November 10, 2008, 06:13:39 PM

Yes, good point... their website is here http://dgteam.ilbello.com/index.php?pid=5