Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: aepos on January 02, 2019, 01:14:16 PM
-
Hi Folks my VMG8324-B10A has been running fine for ages now with V14 firmware, however i have now noticed that the "lan Setup" tab just responds with a blank page. everything else is fine. Used Firefox, Safari and Chrome all with the same results. Have restarted the router and reinstalled the saved config file but still the same problem.
Any Ideas?
Ae
-
What do you mean by the "lan Setup" tab. My VMG8924 using the same firmware as the VMG8324 does not have a tab with that exact name.
If you login as supervisor the "Login Privilege" option allows you to tinker with the menus.
-
What do you mean by the "lan Setup" tab.
I suspect that is Network Setting >> Home Networking >> LAN Setup.
-
I suspect that is Network Setting >> Home Networking >> LAN Setup.
Good spot. I think my first step would be to upgrade the firmware.
-
Hmmm, odd...
This is the OP's second post.
This (shown below) was his first! Notice how long ago.
Hi Folks my VMG8324-B10A has been running fine for ages now with V14 firmware, however i have now noticed that I can no longer access the "home Networking" tab just responds with a blank page. everything else is fine. Used Firefox, Safari and Chrome all with the same results. Have restarted the router and reinstalled the saved config file but still the same problem.
Any thoughts? Thanks Ae
-
The Setup pages in the GUI can behave oddly at times. I've remarked on it a few times and even made a mention on the main site that it can be buggy particularly in Firefox for me. (Although admittedly I've not seen it for a while as I'm using different f/w now)
As already suggested, I would update the f/w.
It may also be worthwhile clearing your cache as I think it may pick up some of its oddness from there, which is why it will sometimes work fine if you switch to another browser.
-
Hmmm, odd...
After checking, it seems genuine. Op is posting from ISP IP & email known to supply their users with a VMG8324.
-
Can't help with the question but my page shows this is their first post?
If you login as supervisor the "Login Privilege" option allows you to tinker with the menus.
Try this first OP ^^
-
Can't help with the question but my page shows this is their first post?
Yes, something seems to have gone awry with the post counting. There was actually a previous post here: https://forum.kitz.co.uk/index.php/topic,13930.msg362583.html#msg362583