xdsl info expand=enabled
Physical Layer Statistics:
Modem state: up
Up time (Days hh:mm:ss): 1 day, 5:14:19
xDSL Standard: ITU-T G.993.2 Annex B (VDSL2)
Channel Mode: Interleaved
Number of reset: 1
Chipset Vendor info (G.994.1): Local Remote
Country code: B500 B500
ID: BDCM IFTN
Specific: 0000 B206
System Vendor info (showtime): Local Remote
Country code: 0F00 0000
ID: TMMB ----
Specific: 3C61 0000
Bearers generic info DS US
Payload rate [kbps]: 22399 7260
Attenuation [dB]: 14.8 2.2
Margins [dB]: 14.6 6.3
Output power [dBm]: 5.4 5.4
Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 3.00 0.00
Delay [ms]: 8.00 0.00
Depth []: 393 0.00
R: 16 0
G.997.1 Statistics (Current):
Failures:
Line failures Near end
Loss of signal (LOS): 1
Loss of frame (LOF): 10
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 11
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 34380 0
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A
G.997.1 Statistics (last 15 minutes):
Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 0
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 34380 0
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A
G.997.1 Statistics (last 24 hours):
Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 0
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 0 0
FEC: 34380 0
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 0 N/A
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 25000 10000
Min. DSLAM throughput kbit/s 128 128
Attainable throughput kbit/s 30400 8270
Current throughput kbit/s 25000 8084
Seamless rate adaptation off off
Latency 8 ms fast
Impulse Noise Protection (INP) 3 0
G.INP off off
Signal-to-noise ratio dB 9 6
Bitswap on on
Line attenuation dB 20 30
Profile 17a
G.Vector off off
Carrier record A43 A43
Telephone Number XXXX on Exchange SUTTON IN ASHFIELD is served by Cabinet 58 | |||||
Featured Products | Downstream Line Rate(Mbps) | Upstream Line Rate(Mbps) | Downstream Handback Threshold(Mbps) | ||
High | Low | High | Low | ||
VDSL Range A (Clean) | 62.5 | 43.8 | 15.3 | 10 | 39.7 |
VDSL Range B (Impacted) | 49.1 | 30 | 13.3 | 6.9 | 22.4 |
Premise environment | Status |
Bridge Tap | N |
VRI | N |
NTEFaceplate | N |
Last Test Date | 04-07-2018 |
Upstream Downstream Sync Rate BRAS Profile Interleave Sync Date Date
7136 19300 19940 TR101 Auto 09-Jul-2018 08:08 09-Jul-2018 08:08
6208 5013 5180 TR101 Auto 08-Jul-2018 16:55 08-Jul-2018 16:55
4472 5013 5180 TR101 Auto 07-Jul-2018 05:54 07-Jul-2018 05:54
2404 4627 4781 TR101 Auto 06-Jul-2018 17:18 06-Jul-2018 17:18
4736 29588 30568 TR101 Auto 06-Jul-2018 01:52 06-Jul-2018 01:52
2376 5099 5268 TR101 Auto 06-Jul-2018 01:50 06-Jul-2018 01:50
4864 29938 30930 TR101 Auto 27-Jun-2018 06:36 27-Jun-2018 06:36
4556 30186 31186 TR101 Auto 26-Jun-2018 19:46 26-Jun-2018 19:46
5464 34706 35856 TR101 Auto 06-May-2018 00:03 06-May-2018 00:03
5416 34757 35908 TR101 Auto 05-May-2018 22:36 05-May-2018 22:36
5540 34733 35884 TR101 Auto 05-May-2018 17:07 05-May-2018 17:07
5604 35133 36296 TR101 Auto 05-May-2018 11:50 05-May-2018 11:50
5256 38714 39996 TR101 Auto 30-Apr-2018 01:33 30-Apr-2018 01:33
Bearers generic info DS US
Payload rate [kbps]: 22399 7260
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 40000 10000
Min. DSLAM throughput kbit/s 128 128
Attainable throughput kbit/s 34680 8665
Current throughput kbit/s 34120 8181
Seamless rate adaptation off off
Latency fast fast
Impulse Noise Protection (INP) 0 0
G.INP off off
Signal-to-noise ratio dB 7 6
Bitswap on on
Line attenuation dB 21 30
Profile 17a
G.Vector off off
Carrier record A43 A43
Seconds With Not Remediable Errors (CRC)
Errors (ES) Many Errors (SES) per Minute Last 15 Minutes
FRITZ!Box 117 0 0.02 0
Central exchange 3 0 0 0
xdsl info expand=enabled
Physical Layer Statistics:
Modem state: up
Up time (Days hh:mm:ss): 1 day, 3:35:13
xDSL Standard: ITU-T G.993.2 Annex B (VDSL2)
Channel Mode: Interleaved
Number of reset: 0
Chipset Vendor info (G.994.1): Local Remote
Country code: B500 B500
ID: BDCM IFTN
Specific: 0000 B206
System Vendor info (showtime): Local Remote
Country code: 0F00 0000
ID: TMMB ----
Specific: 3C61 0000
Bearers generic info DS US
Payload rate [kbps]: 39998 7462
Attenuation [dB]: 14.8 2.2
Margins [dB]: 7.1 6.1
Output power [dBm]: 5.7 5.7
Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 0.00 0.00
Delay [ms]: 0.00 0.00
Depth []: 1 0.00
R: 16 0
G.997.1 Statistics (Current):
Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 11186
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 3564748 15
FEC: 164235004 26
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 8943678 N/A
G.997.1 Statistics (last 15 minutes):
Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 615
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 3564748 15
FEC: 164235004 26
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 8943678 N/A
G.997.1 Statistics (last 24 hours):
Failures:
Line failures Near end
Loss of signal (LOS): 0
Loss of frame (LOF): 0
Loss of power (LPR): 0
Performance monitoring:
Line PM: Near end
Error second (ES): 1525
Channel PM: Near end Far end
Bearer 0:
Code Violation (CV): 3564748 15
FEC: 164235004 26
ATM data path PM: Near end Far end
Bearer 0:
HEC violation count (HEC): 8943678 N/A
{Administrator}=>
I was looking at the snr to carrier graph and there's a big dip down to 2mhz . . .
What is radio frequency interference protection? Disabling some tones?
That is the effect of the DSPBO, required so as not to "swamp" exchange based services, and is calculated from the cabinet assigned loss (CAL).
What is radio frequency interference protection? Disabling some tones?
Under some circumstances radio transmitters located nearby can interfere with DSL communication (RFI: Radio Frequency Interference). This normally will be detected automatically by the FRITZ!Box. If this identification does not work correctly or if an additional source of interference appears, you can move this control step by step toward "Maximum stability" to improve the DSL connection.