Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: Cattytown on March 22, 2017, 04:29:29 PM
-
Hi guys - first post. I was wondering if anyone had got the VR900 working with youview? Specifically I am on plusnet, and my YV box has not yet arrived. I have seen the thread on VR900 and VR200, but that seems to be the V1 box.
The openreach document suggests a second vlan for igmp but I can't see that option for configuration.
I have founder under advanced -> Internet <scroll down> -> Advanced a tick box for igmp proxy - that is set as default.
Short of waiting for the Youview box, is there anything I need do?
Thanks,
Paul.
-
Welcome to the kitz forum. :)
To the best of my knowledge IGMP proxy should be enabled . . . and you say it already is so.
At a guess, the other settings to examine would be those related to STB (i.e. set top box) and "multicast".
Other than that, it is just a case of waiting for the YouView box to be delivered.
-
I found it worked on my VR200 but it had to be in my case BT's dns or it wouldn't work
Sent from my MHA-L09 using Tapatalk
-
Thanks for the welcome.
I now have the youview box, and with the TP-Link it doesn't work - I get ipc6023 which looks to be a pretty generic error, and no picture.
Any suggestions on what I need to be looking at?
Thanks,
Paul.
-
I now have the youview box, and with the TP-Link it doesn't work - I get ipc6023 which looks to be a pretty generic error, and no picture.
That's unfortunate. :(
Any suggestions on what I need to be looking at?
As I have no experience with those devices, other than carefully reviewing the configuration options for IGMP, STB and multicast, then no.
Hopefully other members may be able to assist.
-
Thanks for the welcome.
I now have the youview box, and with the TP-Link it doesn't work - I get ipc6023 which looks to be a pretty generic error, and no picture.
Any suggestions on what I need to be looking at?
Thanks,
Paul.
Does the router have the latest firmware?
-
I found it worked on my VR200 but it had to be in my case BT's dns or it wouldn't work
Sent from my MHA-L09 using Tapatalk
Just tried forcing the local DHCP to provide Plusnet's DHCP servers and it looks good now!
Thanks
-
Just tried forcing the local DHCP to provide Plusnet's DHCP servers and it looks good now!
Thanks
Glad you got it sorted mate
Sent from my MHA-L09 using Tapatalk