Kitz Forum
Computers & Hardware => Networking => Topic started by: tickmike on June 03, 2016, 05:15:13 PM
-
What type of Coax cable is suitable for use to extend from an access point to external aerials ?.
2.4 and 5GHz .
-
Try looking here
http://www.solwise.co.uk/wireless-cable.htm
Ian
-
Just a point which may not be obvious to the inexperienced:= co ax is very lossy at these frequencies - waveguide is better although mechanically inconvenient.
-
It's not too bad if you choose the right cable, the stuff we used on 2.4GHz was under 2dB loss for a 20ft cable including it's connectors. See that Solwise ultra low loss cable for example.