Kitz Forum

Broadband Related => Broadband Hardware => Topic started by: skyeci on April 16, 2016, 03:30:39 PM

Title: Poll..kind of. Which firmware version are you using for the 8800nl
Post by: skyeci on April 16, 2016, 03:30:39 PM

Just wondered for those of you using the 8800nl in bridge mode or as an all in one which firmware are you using..
Please state if g.inp or not
I was advised to use the older dm2 but now I see high levels of ds es where as on the newer version when g.inp was enabled I saw high levels of upstream es.

Be great to get some feed back..

Mine is in bridge mode, dm2 version and no g.inp.

Many thanks.

Title: Re: Poll..kind of. Which firmware version are you using for the 8800nl
Post by: olwalh on April 16, 2016, 04:16:35 PM

I am running 2.32e firmware the DSL driver is version A2pv6F039g1.d24m and I am connected to an huawei cabinet with G.INP. I do see US ES however I do not know if the level is excessive. My stats are on MyDSLWebStats if you are interested (olwalh). I had a retrain early on Friday morning, but before that I had been connected for over two months.