Kitz Forum
Broadband Related => Broadband Hardware => Topic started by: tickmike on December 10, 2014, 02:52:39 PM
-
Having tried all the firmware I can find for the HG612 I still cannot get a good reliable telnet (and that's maybe why DSLstats will not work ).
Do not forget my HG612 is a 2B so I do not know if that makes a difference ?.
Software version V100R001C01B028SP10
Using LAN 2
$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1 (192.168.1.1).
Escape character is '^]'.
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:admin
Password:
Had login error three times. Please wait one minute. After waiting more than one minute you just get the same
Login:admin
Password:
Had login error three times. Please wait one minute.
Login:admin
Password:
Had login error three times. Please wait one minute.
Connection closed by foreign host.
-------------------------------------------
Some times I can telnet in but it does not understand the commands I put in or even sh !.
Other times it take the modem up to 20 seconds to answer.
Do we have any of the people who worked on the UN-locking on our forum ?.
-
Have you changed the password via the web interface?
Does the standard password work, just for telnet?
-
Have you changed the password via the web interface?
Does the standard password work, just for telnet?
admin
admin
-
Update.
I had to take the HG612 out of service and put my speedtouch back to get the internet. :'(
While it's not in use I have connected it up to a test computer and I can Telnet into it and DSLstats works :o
I have not done anything more to the modem, next week I will try putting it back in service again without changing any settings to see what happens.
-
Update.
I put the HG612 back in service today and could telnet into in and DSLstats worked :) But after about an hour things started to go wrong :(
I tried to telnet in and I could put un & pw in ok but the modem would not respond :(.
------------------------------
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:admin
Password:
ATP>sh
ATP>
-------------------------------------------------------------------
DSLstats started reporting log in errors !.
The BT agent is not enabled and it's details for Vlans have been removed.
I'm very puzzled by what is going on as anyone got in ideas what I can try next.
-
As 'Boost' said :-
http://forum.kitz.co.uk/index.php?topic=14762.msg276520#msg276520
"I wonder if the HG612 is literally spazzing out with all those FECs? You might be able to run 'top' from the CLI as soon as you synch and possibly view the util/load?"
I not sure what going on after 30 minutes the modem telnet locks up (BT Agent) is not enabled ! also I do not have a lot of FEC's to day !.
I telnet-ed in to the modem and used 'top'
------------------------------------------
Re-booted-modem
Telnet top
-------------------------------
Mem: 24568K used, 4376K free, 0K shrd, 2360K buff, 7236K cached
CPU: 0% usr 0% sys 0% nice 99% idle 0% io 0% irq 0% softirq
Load average: 0.00 0.00 0.00
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1132 1127 0 R 1216 4% 0% top
146 127 0 S 3428 12% 0% /bin/cms
277 148 0 S 3428 12% 0% /bin/cms
148 146 0 S 3428 12% 0% /bin/cms
278 148 0 R 3428 12% 0% /bin/cms
139 138 0 S 2772 10% 0% /bin/web
137 127 0 S 2772 10% 0% /bin/web
138 137 0 S 2772 10% 0% /bin/web
147 127 0 S 2688 9% 0% /bin/cwmp
661 1 0 S 2448 8% 0% MidServer
136 127 0 S 2444 8% 0% /bin/dbase
140 127 0 S 2356 8% 0% /bin/cli
141 140 0 S 2356 8% 0% /bin/cli
144 141 0 S 2356 8% 0% /bin/cli
1043 141 0 S 2356 8% 0% /bin/cli
145 141 0 S 2356 8% 0% /bin/cli
143 141 0 S 2356 8% 0% /bin/cli
142 141 0 R 2356 8% 0% /bin/cli
669 665 0 S 2344 8% 0% ./btagent
673 672 0 S 2344 8% 0% ./btagent
----------------------------------------------------------
After 30 min, Telnet Froze !, This is about the time DSLstats starts acting odd.
-------------------------------
Mem: 27288K used, 1656K free, 0K shrd, 2360K buff, 7996K cached
CPU: 89% usr 6% sys 0% nice 3% idle 0% io 0% irq 0% softirq
Load average: 0.12 0.23 0.22
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1132 1127 0 R 1216 4% 0% top
146 127 0 S 3428 12% 0% /bin/cms
278 148 0 S 3428 12% 0% /bin/cms
277 148 0 S 3428 12% 0% /bin/cms
148 146 0 S 3428 12% 0% /bin/cms
139 138 0 S 2772 10% 0% /bin/web
137 127 0 S 2772 10% 0% /bin/web
138 137 0 S 2772 10% 0% /bin/web
147 127 0 S 2688 9% 0% /bin/cwmp
3747 640 0 S 2488 9% 0% sshd -E
661 1 0 S 2448 8% 0% MidServer
1299 141 0 S 2444 8% 0% /bin/cli
136 127 0 S 2444 8% 0% /bin/dbase
141 140 0 S 2444 8% 0% /bin/cli
142 141 0 S 2444 8% 0% /bin/cl
----------------------------------------------------------------
-
interesting, really heavy userspace cpu usage. Can you sort by cpu %? Also btagent might not be enabled but its running in your first dump.