Kitz Forum
Chat => Tech Chat => Topic started by: burakkucat on April 24, 2019, 04:28:30 PM
-
Yesterday evening I was reading an Adva document which described the back-to-back connection of two FSP 150CCf-825 devices via a "Layer 2 cloud" and how to establish a management tunnel between them both. Without any definition the two three letter abbreviations, GNE & SNE, were used to refer to the local device (to which the management work-station was connected) and the remote device, respectively.
A couple of years ago, I asked for the definition of a "SNEID" number, in a Beattie Bellman context, and one of our eminent "escapees", from the "Empire of Newgate Street", promptly enlightened me by stating "Sub-Network Element IDentification" number.
Dismissing any thoughts of "Green Noxious Effluent" and "Small Negative Exponent", I wonder if the "NE" could also be "Network Element" in the Adva case. As for the "G" and "S" . . . Gateway?, Subsidiary?, Subservient?, Secondary?
So, to those well versed in all things Juniper, Cisco or Adva, any comments, please?
-
Gateway Network Element
Subtending Network Element
I found this in here: https://www.infinera.com/wp-content/uploads/infinera-ds-consultative-managed-services.pdf (I searched for network gne sne)
-
Yes, Network Elements are managed by a communications network which is a mixture of dedicated comms links and embedded comms channels within the kit. All network elements will have a unique SNEid but those that are connected directly to the comms network will be GNEs, the remote end of the link would be managed by the embedded comms channel.
-
Gateway Network Element
Subtending Network Element
I found this in here: https://www.infinera.com/wp-content/uploads/infinera-ds-consultative-managed-services.pdf (I searched for network gne sne)
Thank you for finding that reference. My Google-foo must have been lacking, yesterday evening.
Yes, Network Elements are managed by a communications network which is a mixture of dedicated comms links and embedded comms channels within the kit. All network elements will have a unique SNEid but those that are connected directly to the comms network will be GNEs, the remote end of the link would be managed by the embedded comms channel.
Ah, I see. Thank you for enhancing my knowledge.
I should come here and ask questions more frequently. :D